3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
• 10 shielded pairs plus 4 individual wires for
high bandwidth applications
• The solution for high speed datacom and
telecom applications
• Each differential pair is shielded with foil;
entire cable bundle is shielded with foil and
braid for additional signal protection
• Rugged MDR ribbon type contact
• Quick release latches
• RoHS* compliant
Date Modified: October 11, 2005
TS-0891-07
Sheet 1 of 3
Physical
Connector Contact Plating
Wiping Area: 30 µ″ [ 0.76 µm ] Min. Gold
Shell
Color: Parchment/Beige
Material: Acrylonitrile Butadiene Styrene (ABS)
Cable
Color: Parchment/Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at 100 VDC
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω (USB 90Ω)
Conductor Size: 28 AWG Stranded
Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]
Environmental
Temperature Rating: -20°C to +75°C
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
Cable
(See Wiring Diagram For Cable Construction)
2X Squeeze Release
Latches
2X Squeeze Release
Latches
42.0
1.65
42.0
1.65
LENGTH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
MDR 26 Position Plug
Both Ends
mm
[Inch]
Tolerance Unless Noted
mm
0.0
0.00
± .1
± .10
[ ] Dimensions for
Reference only
Ordering Information
14526-EZHB-XXX-0QC
Length:
100 = meter
200 = 2 meter
500 = 5 meter
A00 = 10 meter
3M
Interconnect Solutions
http://www.3M.com/interconnects/
TS-0891-07
Sheet 2 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
MDR 26 Position, Pinout D26-1, Rev A Pin One to One
Transmitter, Tx
3M MDR SMT
Receptacle
1
USB+
14
USB2
USB gnd
24
A6M
16
A1M
11
A5P
4
A1P
23
A5M
17
A2M
10
A4P
5
A2P
22
A4M
18
CLK1M
6
CLK1P
9
A3P
Interconnect Solutions
http://www.3M.com/interconnects/
21
A3M
8
DDC/USB gnd
7
DDC/SCL
20
DDC/SDA
20
DDC/SDA
7
DDC/SCL
9
A3P
3M
25
A7M
3
A0P
21
A3M
28 AWG insulated
conductor
13
A7P
12
A6P
8
DDC/USB gnd
100 Ohm balanced
individually shielded twisted
pair (USB pair 90 ohms).
26
LVDS gnd
15
A0M
19
DDC/USB pwr
Symbols Key:
Cable
Receiver, Rx
3M MDR SMT
Receptacle
19
DDC/USB pwr
6
CLK1P
18
CLK1M
22
A4M
5
A2P
10
A4P
17
A2M
23
A5M
4
A1P
11
A5P
16
A1M
24
A6M
12
A6P
3
A0P
15
A0M
25
A7M
2
USB gnd
13
A7P
14
USB-
26
LVDS Gnd
1
USB+
Note:The shields of the 100 Ohm pairs are in commoned in the
cable and share a common drain wire, LVDS ground.
TS-0891-07
Sheet 3 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/328-1368
www.3M.com/electronics
Minimum 10%
Post-Consumer Fiber
Printed in USA.
© 3M 2005
很抱歉,暂时无法提供与“14526-EZHB-500-0QC”相匹配的价格&库存,您可以联系我们找货
免费人工找货