3M™ Scotchlok™
Copper Compression Lugs,
30000 and 31000 Series
Data Sheet
Description
July 2020
3M Scotchlok Copper Compression Lugs are one-piece, seamless copper and are
designed to cover a wide range of conductor sizes. They are available in one-hole,
standard-barrel and one-hole and two-hole long-barrel versions:
Scotchlok lug 30000 Series are one-hole, standard-barrel length lugs and are
designed to cover conductor sizes from 6 AWG through 4/0 AWG.
The Scotchlok lug 31000 Series consists of:
o one-hole, long-barrel length lugs designed to cover conductor sizes from 2 AWG
through 600 kcmil (MCM) and,
o two-hole, long-barrel length lugs designed to cover conductor sizes from 6 AWG
through 1000 kcmil (MCM)
They are designed to terminate copper conductors. Each lug is electro-tin plated to
resist electrolytic corrosion. The lugs are installed using standard industry tooling.
Chamfered ends ensure simplicity and ease of conductor insertion.
Agency Approvals
and Self Certifications
UL Listed, UL Standard 486A-486B, File No. E23438
Features
Simple installation using readily available tools
Manufactured using tin-plated copper
Color coded printing for easy lug identification
The center-of-hole to center-of-hole spacing of the mounting holes meets the
__NEMA® Standard of 1.75" (44,5 mm)
Applications
One-Hole, Standard-Barrel: To terminate copper conductors from 6 AWG through
4/0 AWG
One-Hole, Long-Barrel: To terminate copper conductors from 2 AWG through
600 kcmil (MCM)
Two-Hole, Long-Barrel: To terminate copper conductors from 6 AWG through
1000 kcmil (MCM)
For low and medium voltage up to 35 kV
For indoor and outdoor use
CSA Certified, File No. 015503
1 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
One-Hole, Standard-Barrel Lug Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)]
NOTE: All listed lugs in this table are UL Listed and CSA Certified
C,
P,
W,
Center of
Pad
Pad Width, Hole-to-End
Length,
+/- .060”
of Pad,
+/- .060”
+/- .030”
O.D.,
+/- .010”
L,
Length,
+/- .100”
B,
Barrel
Length,
+/- .060”
.196
(5,0)
.290
(7,4)
1.78
(45,2)
.86
(21,8)
.75
(19,1)
.435
(11,0)
.375
(9,5)
Blue
.196
(5,0)
.290
(7,4)
1.78
(45,2)
.86
(21,8)
.75
(19,1)
.435
(11,0)
.375
(9,5)
5/16
(8)
Blue
.196
(5,0)
.290
(7,4)
1.78
(45,2)
.86
(21,8)
.75
(19,1)
.50
(12,7)
.375
(9,5)
4 AWG
#10
(5)
Gray
.247
(6,3)
.340
(8,6)
1.94
(49,3)
.75
(19,1)
.89
(22,6)
.485
(12,3)
.375
(9,5)
30019
4 AWG
1/4
(6)
Gray
.247
(6,3)
.340
(8,6)
1.94
(49,3)
.75
(19,1)
.89
(22,6)
.485
(12,3)
.375
(9,5)
30021
4 AWG
3/8
(10)
Gray
.247
(6,3)
.340
(8,6)
1.94
(49,3)
.75
(19,1)
.89
(22,6)
.59
(15,1)
.375
(9,5)
30022
2 AWG
1/4
(6)
Brown
.307
(7,8)
.416
(10,6)
1.97
(50,0)
.81
(20,7)
.89
(22,6)
.63
(15,9)
.375
(9,5)
30023
2 AWG
5/16
(8)
Brown
.307
(7,8)
.416
(10,6)
1.97
(50,0)
.81
(20,7)
.89
(22,6)
.63
(15,9)
.375
(9,5)
30024
2 AWG
3/8
(10)
Brown
.307
(7,8)
.416
(10,6)
1.97
(50,0)
.81
(20,7)
.89
(22,6)
.63
(15,9)
.375
(9,5)
30027
1 AWG
5/16
(8)
Green
.358
(9,1)
.462
(11,7)
1.97
(50,0)
.81
(20,7)
.75
(19,1)
.69
(17,5)
.375
(9,5)
30028
1 AWG
3/8
(10)
Green
.358
(9,1)
.462
(11,7)
1.97
(50,0)
.81
(20,7)
.75
(19,1)
.69
(17,5)
.375
(9,5)
30031
1/0 AWG
5/16
(8)
Pink
.394
(10,0)
.512
(13,0)
2.16
(54,9)
.81
(20,7)
.89
(22,6)
.75
(19,1)
.375
(9,5)
30032
1/0 AWG
3/8
(10)
Pink
.394
(10,0)
.512
(13,0)
2.16
(54,9)
.81
(20,7)
.89
(22,6)
.75
(19,1)
.375
(9,5)
30036
2/0 AWG
3/8
(10)
Black
.439
(11,2)
.560
(14,2)
2.37
(60,2)
.87
(22,2)
1.11
(28,2)
.81
(20,7)
.375
(9,5)
30041
3/0 AWG
1/2
(12)
Orange
.490
(12,4)
.617
(15,7)
2.63
(66,8)
.94
(23,8)
1.11
(28,2)
.91
(23,0)
.531
(13,5)
30045
4/0 AWG
1/2
(12)
Purple
.548
(13,9)
.687
(17,4)
2.60
(65,9)
.97
(24,6)
1.11
(28,2)
1.00
(25,4)
.531
(13,5)
3M™
Scotchlok™
Lug Number
Conductor
Size AWG
Stud
Size
Color
Code
I.D.,
+/- .010”
30014
6 AWG
#10
(5)
Blue
30015
6 AWG
1/4
(6)
30016
6 AWG
30018
2 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
One Hole, Long-Barrel Lug Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)]
3M™
Conductor
Scotchlok™
Size AWG or
Lug
kcmil (MCM)
Number
Stud
Size
Color
Code
L,
I.D.,
O.D.,
Length,
+/- .010” +/- .010”
+/- .100”
B,
Barrel
Length,
+/- .060”
C,
P,
W,
Center of
Pad
Agency
Pad Width, Hole-toLength,
Approvals
+/- .060” End of Pad,
+/- .060”
+/- .030”
31023
2 AWG
5/16
(8)
Brown
.307
(7,8)
.416
(10,6)
2.32
(58,9)
1.16
(29,5)
.89
(22,6)
.63
(16,0)
.380
(9,7)
UL
31027
1 AWG
5/16
(8)
Green
.358
(9,1)
.462
(11,7)
2.50
(63,5)
1.34
(34,0)
.75
(19,1)
.69
(17,5)
.380
(9,7)
UL
31032
1/0 AWG
3/8
(10)
Pink
.394
(10,0)
.512
(13,0)
2.84
(72,1)
1.49
(37,8)
.89
(22,6)
.75
(19,1)
.375
(9,5)
UL
31036
2/0 AWG
3/8
(10)
Black
.439
(11,2)
.560
(14,2)
2.84
(72,1)
1.44
(36,5)
.89
(22,6)
.810
(20,6)
.375
(9,5)
UL, CSA
31041
3/0 AWG
1/2
(12)
Orange
.490
(12,4)
.617
(15,7)
3.13
(79,5)
1.44
(36,5)
1.11
(28,2)
.910
(23,1)
.531
(13,5)
UL, CSA
31045
4/0 AWG
1/2
(12)
Purple
.548
(13,9)
.687
(17,4)
3.32
(84,4)
1.56
(39,7)
1.11
(28,2)
1.00
(25,4)
.531
(13,5)
UL, CSA
31049
250 kcmil
1/2
(12)
Yellow
.595
(15,1)
.750
(19,1)
3.38
(85,9)
1.50
(38,0)
1.11
(28,2)
1.11
(28,2)
.531
(13,5)
UL, CSA
31053
300 kcmil
1/2
(12)
White
.650
(16,5)
.813
(20,6)
3.78
(96,0)
1.94
(49,2)
1.11
(28,2)
1.22
(31,3)
.531
(13,5)
UL, CSA
31056
350 kcmil
1/2
(12)
Red
.700
(17,8)
.875
(22,2)
3.84
(97,5)
1.94
(49,2)
1.11
(28,2)
1.27
(32,3)
.531
(13,5)
UL, CSA
31060
400 kcmil
1/2
(12)
Blue
.762
(19,3)
.950
(24,1)
4.16
(105,7)
2.00
(50,8)
1.34
(34,2)
1.41
(35,8)
.66
(16,8)
UL
31066
500 kcmil
1/2
(12)
Brown
.836
(21,3)
1.059
(26,9)
4.50
(114,3)
2.19
(55,6)
1.34
(34,2)
1.53
(38,9)
.66
(16,8)
UL, CSA
31067
500 kcmil
5/8
(16)
Brown
.836
(21,3)
1.059
(26,9)
4.50
(114,3)
2.19
(55,6)
1.34
(34,2)
1.53
(38,9)
.66
(16,8)
UL, CSA
31068
600 kcmil
1/2
(12)
Green
.923
(23,4)
1.188
(30,2)
5.12
(130,0)
2.60
(66,0)
1.75
(44,5)
1.69
(42,9)
.88
(22,4)
UL
3 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
Two Hole, Long-Barrel Lug Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)]
3M™
Conductor
Scotchlok™ Size AWG or Stud
Lug
kcmil
Size
Number
(MCM)
Color
Code
L,
I.D.,
O.D.,
Length,
+/- .010” +/- .010”
+/- .100”
B,
Barrel
Length,
+/- .100”
C,
P,
W,
Center of
Pad Length, Pad Width,
Hole-to+/- .060”
+/- .060” End of Pad,
+/- .030”
C1,
Hole-toHole,
Center-toCenter,
+/- .015”
Agency
Approvals
31116
6 AWG
1/2
(12)
Blue
.200
(5,1)
.290
(7,4)
3.16
(80,3)
1.07
(27,2)
3.00
(76,2)
.63
(16,0)
.63
(16,0)
1.75
(44,5)
N/A
31122
4 AWG
1/2
(12)
Grey
.250
(6,4)
.340
(8,6)
4.19
(106,4)
1.07
(27,2)
3.00
(76,2)
.63
(16,0)
.63
(16,0)
1.75
(44,5)
N/A
31125
2 AWG
1/2
(12)
Brown
.310
(7,9)
.420
(10,7)
4.85
(123,2)
1.25
(31,8)
3.00
(76,2)
.63
(16,0)
.63
(16,0)
1.75
(44,5)
N/A
31129
1 AWG
1/2
(12)
Green
.360
(9,1)
.460
(11,7)
4.85
(123,2)
1.25
(31,8)
3.00
(76,2)
.69
(17,5)
.63
(16,0)
1.75
(44,5)
N/A
31130
1/0 AWG
1/2
(12)
Pink
.390
(9,9)
.510
(13,0)
4.98
(126,5)
1.38
(35,0)
3.00
(76,2)
.80
(20,3)
.63
(16,0)
1.75
(44,5)
N/A
31137
2/0 AWG
1/2
(12)
Black
.441
(11,2)
.560
(14,2)
5.03
(127,8)
1.45
(36,8)
3.00
(76,2)
.81
(20,6)
.63
(16,0)
1.75
(44,5)
N/A
31141
3/0 AWG
1/2
(12)
Orange
.490
(12,4)
.617
(15,7)
5.13
(130,3)
1.44
(36,6)
3.00
(76,2)
.91
(23,1)
.63
(16,0)
1.75
(44,5)
N/A
31145
4/0 AWG
1/2
(12)
Purple
.548
(13,9)
.687
(17,4)
5.16
(131,1)
1.56
(39,6)
3.00
(76,2)
1.00
(25,4)
.63
(16,0)
1.75
(44,5)
UL, CSA
31149
250 kcmil
1/2
(12)
Yellow
.595
(15,1)
.750
(19,1)
5.31
(134,9)
1.56
(39,6)
3.00
(76,2)
1.13
(28,7)
.63
(16,0)
1.75
(44,5)
UL, CSA
31153
300 kcmil
1/2
(12)
White
.650
(16,5)
.813
(20,7)
5.75
(146,1)
1.94
(49,2)
3.00
(76,2)
1.22
(31,0)
.63
(16,0)
1.75
(44,5)
UL, CSA
31156
350 kcmil
1/2
(12)
Red
.700
(17,8)
.875
(22,2)
5.75
(146,1)
1.94
(49,2)
3.00
(76,2)
1.31
(33,3)
.63
(16,0)
1.75
(44,5)
UL, CSA
31160
400 kcmil
1/2
(12)
Blue
.762
(19,4)
.950
(24,1)
6.00
(152,4)
2.12
(53,8)
3.00
(76,2)
1.41
(35,8)
.63
(16,0)
1.75
(44,5)
UL
31166
500 kcmil
1/2
(12)
Brown
.836
(21,2)
1.059
(26,9)
6.16
(156,5)
2.19
(55,6)
3.00
(76,2)
1.53
(38,9)
.63
(16,0)
1.75
(44,5)
UL, CSA
31168
600 kcmil
1/2
(12)
Green
.923
(23,4)
1.188
(30,2)
6.72
(170,6)
2.62
(66,5)
3.00
(76,2)
1.69
(42,9)
.63
(16,0)
1.75
(44,5)
UL
31172
750 kcmil
1/2
(12)
Black
1.031
(26,2)
1.299
(33,0)
7.00
(177,8)
2.81
(71,4)
3.00
(76,2)
1.72
(43,7)
.63
(16,0)
1.75
(44,5)
UL, CSA
31178
1000 kcmil
1/2
(12)
White
1.173
(29,8)
1.500
(38,1)
7.28
(184,9)
2.94
(74,6)
3.00
(76,2)
1.72
(43,7)
.63
(16,0)
1.75
(44,5)
UL, CSA
4 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
Typical Properties
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
3M Scotchlok Copper Compression Lugs, 30000 and 31000 Series, when crimped with
approved die sets, can be used on cables with an operating temperature of 221oF (105oC)
and an emergency overload rating of 284oF (140oC). The lugs pass the requirements of
UL486A (Underwriters Laboratories standard for safety) and are CSA Certified (as
indicated in the above tables). The current rating of these lugs meets or exceeds the
current rating of the conductor size for which it is intended.
Tool/Installation
Information
Lugs shall be crimped with one of the approved die sets according to the engineering
information supplied with the lugs. (Also see Crimping Tool-Die Sets tables below).
If different crimping tools and die sets are used, consult the tool and die manufacturer.
Crimping Tool Recommendations
One-Hole, Standard-Barrel Lug Crimping Tool – Die Sets (Minimum # of Crimps)
3M™
Conductor Size
Scotchlok™ AWG or kcmil
Lug Number
(MCM)
Burndy Corporation
Thomas & Betts Corporation
Square D Co.
Anderson Div.
MD6
MY29
Y34A
Y35, Y39,
Y45*, Y46*
TBM5
TBM 8
TBM15
VC6-3,
VC6-FT**
30014
6 AWG
-------
6 AWG (1)
-------
U5CRT (1)
Blue (1)
Blue (1)
-------
Universal (1)
30015
6 AWG
-------
6 AWG (1)
-------
U5CRT (1)
Blue (1)
Blue (1)
-------
Universal (1)
30016
6 AWG
-------
6 AWG (1)
-------
U5CRT (1)
Blue (1)
Blue (1)
-------
Universal (1)
30018
4 AWG
W161 (1)
4 AWG (1)
A4CR (1)
U4CRT (1)
Gray (1)
Gray (1)
-------
Universal (1)
30019
4 AWG
W161 (1)
4 AWG (1)
A4CR (1)
U4CRT (1)
Gray (1)
Gray (1)
-------
Universal (1)
30021
4 AWG
W161 (1)
4 AWG (1)
A4CR (1)
U4CRT (1)
Gray (1)
Gray (1)
-------
Universal (1)
30022
2 AWG
W162 (2)
2 AWG (1)
A2CR (1)
U2CRT (2)
Brown (1)
Brown (1)
33 (1)
Universal (1)
30023
2 AWG
W162 (2)
2 AWG (1)
A2CR (1)
U2CRT (2)
Brown (1)
Brown (1)
33 (1)
Universal (1)
30024
2 AWG
W162 (2)
2 AWG (1)
A2CR (1)
U2CRT (2)
Brown (1)
Brown (1)
33 (1)
Universal (1)
30027
1 AWG
-------
1 AWG (1)
A1CR (1)
U1CRT (2)
Green (1)
Green (1)
37 (1)
Universal (1)
30028
1 AWG
-------
1 AWG (1)
A1CR (1)
U1CRT (2)
Green (1)
Green (1)
37 (1)
Universal (1)
30031
1/0 AWG
W163 (2)
1/0 (1)
A25R (1)
U25RT (1)
Pink (2)
Pink (2)
42H (2)
Universal (1)
30032
1/0 AWG
W163 (2)
1/0 (1)
A25R (1)
U25RT (1)
Pink (2)
Pink (2)
42H (2)
Universal (1)
30036
2/0 AWG
W241 (2)
2/0 (1)
A26R (1)
U26RT (2)
Black (2)
Black (2)
45 (1)
Universal (1)
30041
3/0 AWG
W243 (2)
3/0 (1)
A27R (1)
U27RT (2)
Orange (2) Orange (2)
50 (1)
Universal (1)
30045
4/0 AWG
BG (3)
4/0 (1)
A28R (2)
U28RT (2)
Purple (2)
54H (2)
Universal (1)
Purple (2)
* Y45 and Y46 accept all Y35 dies (“U” series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter.
** Anderson VC6-3 and VC6-FT require no die set.
5 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
One-Hole, Long-Barrel Lug Crimping Tool – Die Sets (Minimum # of Crimps)
3M™
Conductor Size
Scotchlok™ AWG or kcmil
Lug Number
(MCM)
Burndy Corporation
Thomas & Betts Corporation
Square D Co.
Anderson Div.
MD6
MY29
Y34A
Y35, Y39,
Y45*, Y46*
TBM5
TBM 8
TBM15
VC6-3,
VC6-FT**
W162 (2)
2 AWG (2)
A2CR (2)
U2CRT (2)
Brown (2)
Brown (2)
33 (2)
Universal (1)
W1CRT1 (2) 1 AWG (2)
A1CR (2)
U1CRT (2)
Green (2)
Green (2)
37 (2)
Universal (1)
31023
2 AWG
31027
1 AWG
31032
1/0 AWG
W163 (2)
1/0 (2)
A25R (2)
U25RT (2)
Pink (2)
Pink (2)
42H (2)
Universal (1)
31036
2/0 AWG
W241 (3)
2/0 (2)
A26R (2)
U26RT (2)
Black (3)
Black (3)
45 (2)
Universal (1)
31041
3/0 AWG
W243 (3)
3/0 (2)
A27R (2)
U27RT (2)
Orange (3) Orange (3)
50 (2)
Universal (1)
31045
4/0 AWG
BG (4)
4/0 (2)
A28R (2)
U28RT (2)
Purple (3)
Purple (3)
54H (3)
Universal (1)
31049
250 kcmil
W166 (4)
250 (2)
A29R (2)
U29RT (2)
Yellow (2)
Yellow (2)
62 (2)
Universal (2)
31053
300 kcmil
-------
-------
A30R (2)
U30RT (3)
-------
White (3)
66 (3)
Universal (2)
31056
350 kcmil
-------
-------
A31R (2)
U31RT (3)
-------
Red (4)
71H (4)
-------
31060
400 kcmil
-------
-------
A32R (2)
U32RT (3)
-------
Blue (4)
76H (4)
-------
31066
500 kcmil
-------
-------
A34R (2)
U34RT (3)
-------
Brown (4)
87H (4)
-------
31067
500 kcmil
-------
-------
A34R (2)
U34RT (3)
-------
Brown (4)
87H (4)
-------
31068
600 kcmil
-------
-------
-------
U36RT (3)
-------
Green (4)
94H (4)
-------
* Y45 and Y46 accept all Y35 dies (“U” series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter.
** Anderson VC6-3 and VC6-FT require no die set.
6 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
Two-Hole, Long-Barrel Lug Crimping Tool – Die Sets (Minimum # of Crimps)
3M™
Conductor Size
Scotchlok™ AWG or kcmil
Lug Number
(MCM)
Burndy Corporation
MD6
MY29
Thomas & Betts Corporation
Square D Co.
Anderson Div.
Y34A
Y35, Y39,
Y45*, Y46*
TBM5
TBM 8
TBM15
VC6-3,
VC6-FT**
31116
6 AWG
W5CRT (2) 6 AWG (2)
A5CR (2)
U5CRT (2)
Blue (2)
Blue (2)
24 (2)
Universal (1)
31122
4 AWG
W4CRT (2) 4 AWG (2)
A4CR (2)
U4CRT (2)
Grey (2)
Grey (2)
29 (2)
Universal (1)
31125
2 AWG
W2CRT (2) 2 AWG (2)
A2CR (2)
U2CRT (2)
Brown (2)
Brown (2)
33 (2)
Universal (1)
31129
1 AWG
W1CRT1 (2) 1 AWG (2)
A1CR (2)
U1CRT (2)
Green (2)
Green (2)
37 (2)
Universal (1)
31130
1/0 AWG
W25RT (4)
1/0 (2)
A25R (2)
U25RT (2)
Pink (2)
Pink (2)
42H (2)
Universal (1)
31137
2/0 AWG
W26RT (4)
2/0 (2)
A26R (2)
U26RT (2)
Black (3)
Black (3)
45 (2)
Universal (1)
31141
3/0 AWG
W27RT (4)
3/0 (2)
A27R (2)
U27RT (2)
Orange (3) Orange (3)
50 (2)
Universal (1)
31145
4/0 AWG
BG (4)
4/0 (2)
A28R (2)
U28RT (2)
Purple (3)
Purple (3)
54H (3)
Universal (1)
31149
250 kcmil
W166 (4)
250 (2)
A29R (2)
U29RT (2)
Yellow (2)
Yellow (2)
62 (2)
Universal (2)
31153
300 kcmil
-------
-------
A30R (2)
U30RT (3)
-------
White (3)
66 (3)
Universal (2)
31156
350 kcmil
-------
-------
A31R (2)
U31RT (3)
-------
Red (4)
71H (4)
-------
31160
400 kcmil
-------
-------
A32R (2)
U32RT (3)
-------
Blue (4)
76H (4)
-------
31166
500 kcmil
-------
-------
A34R (2)
U34RT (3)
-------
Brown (4)
87H (4)
-------
31168
600 kcmil
-------
-------
-------
U36RT (3)
-------
Green (4)
94H (4)
-------
31172
750 kcmil
-------
-------
-------
Y39, Y45,
Y46: U39RT
(5)
-------
-------
106H (4)
-------
-------
Y45: S44RT
(6)
Y46: P44RT
(6)
-------
-------
125H (4)
-------
31178
1000 kcmil
-------
-------
* Y45 and Y46 accept all Y35 dies (“U” series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter.
** Anderson VC6-3 and VC6-FT require no die set
7 of 8
3M™ Scotchlok™ Copper Compression Lugs, 30000 and 31000 Series
Storage
Components of the lugs are not impaired by freezing or overheating due to ambient
temperatures found in typical storage or shipping. Normal stock rotation procedures
are recommended.
Availability
Please contact your local distributor; available from 3M.com/electrical, Purchasing
Information (at bottom of website page), then choose your Market (Construction and
Industrial, Electrical Utility or Electrical & Electronics OEM) or call 1.800.245.3573.
3M and Scotchlok are trademarks of 3M Company.
NEMA is a trademark of the National Electrical Manufacturers Association.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based
on information believed to be reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to
the product, which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order, shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M
MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this
product is defective within the warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any direct or indirect, special, incidental
or consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
Electrical Markets Division
Austin, TX
800.245.3573
FAX: 800.245.0329
www.3M.com/electrical
Please recycle
© 3M 2020 All rights reserved
78-8141-4603-7 Rev E
8 of 8