3357-6509-1C

3M™ D Sub EMI Junction Shell Metalized Plastic • Protection from EMI/ESD • Easy assembly helps reduce time and labor to ensure low applied cost • Light weight, compact design • Strain relief compensates for multiple cable diameters • Jackscrews provide positive retention • For regulatory information about this product, visit 3M.com/regs or contact your 3M representative  Date Modified: February 14, 2019  TS-0032-C Sheet 1 of 2 Physical Shell: Material: Plating: Compression Insert: Material: Flammability: Durometer: Hardware: ABS Nickel over Copper Thermoplastic Elastometer UL 94V-0 75 ± 5 (2) Jackscrews #4-40 × .438 (2) Saddle Washers (2) Nuts 4-40 UNC for 9, 15 & 25 position (3) Nuts 4-40 UNC for 37 position (2) Screws 4-40 UNC for 9, 15 & 25 position (3) Screws 4-40 UNC for the 37 position Material: Steel Plating: Zinc Mounting Hardware: See Specification Sheet TS-0142 Environmental Temperature Rating: 0°C to +75°C 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ D Sub EMI Junction Shell Metalized Plastic Table 1 - Compression Insert Dimensions Insert for 1 2 3 4 5 6 G OD ID OD ID OD ID OD ID OD ID OD ID 0.475 [ 12.07 ] 0.320 [ 8.13 ] 0.360 [ 9.14 ] 0.315 [ 8.00 ] 0.360 [ 9.14 ] 0.285 [ 7.24 ] 0.360 [ 9.14 ] 0.255 [ 6.48 ] 0.360 [ 9.14 ] 0.210 [ 5.33 ] N/A N/A 0.475 [ 12.07 ] 3357-6525 0.600 [ 15.24 ] 0.450 [ 11.43 ] 0.450 [ 11.43 ] 0.410 [ 10.41 ] 0.450 [ 11.43 ] 0.370 [ 9.40 ] 0.450 [ 11.43 ] 0.300 [ 7.62 ] 0.450 [ 11.43 ] 0.230 [ 5.84 ] N/A N/A 0.600 [ 15.24 ] 3357-6537 0.810 [ 20.57 ] 0.650 [ 16.51 ] 0.700 [ 17.78 ] 0.620 [ 15.75 ] 0.655 [ 16.64 ] 0.570 [ 14.48 ] 0.655 [ 16.64 ] 0.500 [ 12.70 ] 0.655 [ 16.64 ] 0.425 [ 10.80 ] 0.655 [ 16.64 ] 0.350 [ 8.89 ] 0.810 [ 20.57 ] 3357-6509 3357-6515 D COVER SCREW TOP COVER G (Dia Collar) F 1 2 See note 3 E CABLE SHIELD (FOLDED BACK) 3 CABLE CONNECTOR CAPTIVE SCREW 4 C 5 SADDLE WASHER 6 A B NUT BOTTOM COVER Compression Inserts see Table 1 Junction Shell see Table 2 Table 2 - Junction Shell 3M Part Number Dimensions B C 3357-6509 1.22 [ 31.0 ] 1.58 [ 40.13 ] 3357-6515 1.54 [ 39.1 ] 1.88 [ 47.75 ] 2.09 [ 53.1 ] 2.73 [ 69.3 ] 3357-6525 3357-6537 A 0.64 [ 16.3 ] D Cable O.D. Range E F 0.984 [ 24.99 ] Min Max 0.210 [ 5.33 ] 0.320 [ 8.13 ] 0.40 [ 10.2 ] 0.64 [ 16.3 ] 1.71 [ 47.75 ] 0.52 [ 13.2 ] 0.71 [ 18.0 ] 1.857 [ 47.17 ] 0.23 [ 5.84 ] 0.45 [ 11.43 ] 2.12 [ 53.85 ] 0.73 [ 18.5 ] 0.91 [ 23.11 ] 2.500 [ 63.50 ] 0.35 [ 8.89 ] 0.65 [ 16.51 ] 1.312 [ 33.32 ] Inch [mm] Tolerance Unless Noted Inch .0 .00 .000 ±.1 ±.01 ±.005 [ ] Dimensions for Reference Only Note: 1. Compression inserts cannot be ordered separately. 2. Use applicable Jack Screw or Jack Socket Kit mounting hardware. 3. The 37 position shell has 3 cover screw holes. Ordering Information Connector Size 09 = 9 Position 15 = 15 Position 25 = 25 Position 37 = 37 Position 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect/ 3357 - 65XX - 1C TS-0032-C Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Safety Data Sheet: Consult Safety Data Sheet before use. Regulatory: For regulatory information about this product, contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnect/ Please recycle. Printed in USA. © 3M 2019. All rights reserved. 3M is a trademark of 3M Company.