4640-6700

8 TM 3M 7 6 5 4 3 2 1 NOTES WIREMOUNT PLUG, 4600 SERIES PERFORMANCE: CURRENT RATING: 1.50 A, ALL CONTACTS POWERED .100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE 1. REGULATORY INFORMATION: VISIT 3M.com/regs 2. IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 2.25 A, 6 CONTACTS POWERED 5.50 A, 1 CONTACT POWERED (RATING CONDITIONS: EIA-364-070, METHOD 2, 30 C MAXIMUM TEMPERATURE RISE) UL & CUL VOLTAGE RATING: INSULATION RESISTANCE: WITHSTANDING VOLTAGE: OPERATING TEMPERATURE: D STRAIN RELIEF COVER D 125VAC > 1 x 109 Ohms AT 500 VDC 1000 VACrms AT SEA LEVEL -55 C TO +105 C AGENCY LISTINGS: UNDERWIRTERS LABORATORIES (UL): FILE No. E68080 UL RATINGS CUL RATINGS: TEMPERATURE: 130 C TEMPERATURE: 130 C VOLTAGE: 125V VOLTAGE: 125V CURRENT: 1.0A CURRENT: 1.0A PHYSICAL: 46XX-X0X0 INSULATOR: MATERIAL: FLAMMABILITY: COLOR: CONTACT: MATERIAL: PLATING: UNDER PLATING: "U" SLOT: WIPING AREA: WIRE ACCOMMODATION: MARKINGS: C C COPPER ALLOY 100 " [2.54 m] NICKEL-OVERALL GOLD FLASH 30 " [0.76 m] GOLD 26 AND 28 AWG SOLID AND STRANDED 3M LOGO AND LOT NUMBER E REVISION 1 DIM. "I" REF. GLASS FILLED POLYESTER (PBT) UL94V-0 GRAY 78-5100-0086-8 DIM. "J" DRAWING NUMBER 46XX-X0X1 B STRAIN RELIEF (ORDER SEPARATELY) 46XX-X0X5 CONTACT QTY: (SEE TABLE 1) COVER STYLE: 6=OPEN END (DAISY CHAINING/BUSSING STANDARD) 7=CLOSED END (END CABLE TERMINATION) A 3448-46XX ORDERING INFORMATION 46XX-XXXX CONTACT QTY: (SEE TABLE 1) BODY STYLE: 0=W/MOUNTING FLANGE (STANDARD) 1=W/OUT MOUNTING FLANGE 5=MOUNTING FLANGE W/THREADED INSERT FROM SOCKET MATING SIDE E DIMENSIONS: INCH [MM] [MM] FOR REF. ONLY POLARIZATION: 0=FOR CONTACT QTY 14 TO 64 0=FOR NOTCH C ON 10 POSITION 5=FOR NOTCH B ON 10 POSIITON DESIGN REFERENCE 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 8 NEXT ASSEMBLY ACCESS CODES DIVISION 6 5 94220 DO NOT SCALE DRAWING 4 JNC SAN R 2 1 THIRD ANGLE PROJECTION MAX SURFACE ROUGHNESS ALL SURFACES 3 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 .0 .00 .000 ANGLES JNC SAN REVISED AND REDRAWN REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE FEB 10,2021 CHKD DATE C 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE INTERPRET PER ASME Y14.5 - 2018 UL FILE NO: E68080 FEB 11,2021 DIVISION CODE MARKED ONLY 7 D EMSD ASSEMBLY TOOLS: 3MTM PRESS 3640 (OR EQUIVALENT), 3MTMLOCATOR PLATE 3443-96, 3MTM PLATTEN 3442-9 APR 08,2021 ADD U-SLOT GOLD FLASH NOTE EJECTOR/LATCH SYSTEM: 0=NONE (STANDARD) 2=SHORT EJECTOR LATCH (3505-16) 3=LONG EJECTOR LATCH (3505-17) 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 96508 MN 55144 DRFT CHKD MFG DATE APPVL DATE S. NEU FEB 10,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE WIREMOUNT PLUG CONN., LATCH/EJECT, .100 X .100 CAGE SIZE NUMBER MODEL 4600 DRAWING NO. REV. 78-5100-0086-8 DET. LISTS 1 YES NO E SHT 1 OF 4 Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6 B A 8 TM 3M 7 6 5 4 3 2 1 NOTES WIREMOUNT PLUG, 4600 SERIES 1 POLARIZATION OF 10 POSITION PRODUCT CAN BE EITHER: - CENTER NOTCH B: 4610-XX5X - NOTCH C: 4610-XX0X. 2 NOTCHES A AND C WILL ACCOMMODATE 3M POLARIZATION KEY PART NO. 3518. .100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE DIM. "D" D .25 D 6.4 2X #4-40 UNC X [.14 [3.6] LG THREADED INSERT TORQUE SPEC: 3-5 IN/LB .16 4.1 OPTIONAL CLOSED END COVER .050 TYP. 1.27 THREADED INSERT MOUNTING FLANGES NONCONDUCTIVE TRANSFER ADHESIVE WITH LINER OPEN COVER C C NOTCH B SEE TABLE 1 .050 NOTCH C SEE TABLE 1 AND NOTE 2 NOTCH A SEE TABLE 1 AND NOTE 2 1.27 .235 5.97 DIM. "F" .525 78-5100-0086-8 E REVISION 13.34 .17 2X OPTIONAL EJECTOR/LATCH POSITION 1 ORIENTATION TRIANGLE DRAWING NUMBER 4.3 NO MOUNTING FLANGES .155 B 2.54 .100 2X .12 3.2 B 0.25 POSITION 1 2.54 A .165 4.20 .25 6.4 .33 8.4 A DIM. "B" POSITION 2 DIM. "F" .25 6.4 E 96508 APR 08,2021 ADD U-SLOT GOLD FLASH NOTE DIM. "C" D DIM. "A" .025 SQ. TYP. DESIGN REFERENCE .24 6.2 NEXT ASSEMBLY ACCESS CODES DIVISION A-A DO NOT SCALE DRAWING 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 2 1 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 5 4 ECO JNC SAN 3 ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE FEB 10,2021 CHKD DATE C 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 6 FEB 11,2021 DIVISION CODE INTERPRET PER ASME Y14.5 - 2018 7 REV EMSD SECTION SCALE 4x 8 94220 REVISED AND REDRAWN 0.64 SLOTTED MOUNTING FLANGES A JNC SAN 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE S. NEU FEB 10,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE WIREMOUNT PLUG CONN., LATCH/EJECT, .100 X .100 CAGE SIZE NUMBER MODEL 4600 DRAWING NO. REV. 78-5100-0086-8 DET. LISTS 1 YES NO E SHT 2 OF 4 Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6 .100 3.94 .010 A 8 TM 3M 7 6 5 4 3 2 1 NOTES WIREMOUNT PLUG, 4600 SERIES 1 MATERIAL: .012 [0.30] THK STAINLESS STEEL. 2 THE DISTANCE FROM THE STRAIN RELIEF TO THE CONNECTOR IS EQUAL TO .04 [1.0] PLUS THE CABLE THICKNESS. 3 POLARIZATION OF 10 POSITION PRODUCT CAN BE EITHER: - CENTER NOTCH B: 4610-XX5X - NOTCH C: 4610-XX0X. .100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE DIM. "E" TABLE 1 DIMENSIONS D PIN QTY. DIM. "A" DIM. "B" DIM. "C" DIM. "D" DIM. "E" DIM. "F" 10 1.50 [38.1] .71 [18.0] 1.20 [30.5] .77 [19.6] .85 [21.6] .90 [22.9] 14 16 20 24 26 30 34 36 40 50 60 64 1.70 [43.2] 1.80 [45.7] 2.00 [50.8] 2.20 [55.9] 2.30 [58.4] 2.50 [63.5] 2.70 [68.6] 2.80 [71.1] 3.00 [76.2] 3.50 [88.9] 4.00 [101.6] 4.20 [106.7] .91 [23.1] 1.01 [25.7] 1.21 [30.7] 1.41 [35.8] 1.51 [38.4] 1.71 [43.4] 1.91 [48.5] 2.01 [51.1] 2.21 [56.1] 2.71 [68.8] 3.21 [81.5] 3.41 [86.6] 1.40 1.50 1.70 1.90 2.00 2.20 2.40 2.50 2.70 3.20 3.70 3.90 [35.6] [38.1] [43.2] [48.3] [50.8] [55.9] [61.0] [63.5] [68.6] [81.3] [94.0] [99.1] .97 [24.6] 1.07 [27.2] 1.27 [32.3] 1.47 [37.3] 1.57 [39.9] 1.77 [45.0] 1.97 [50.0] 2.07 [52.6] 2.27 [57.7] 2.77 [70.4] 3.27 [83.1] 3.47 [88.1] 1.05 1.15 1.35 1.55 1.65 1.85 2.05 2.15 2.35 2.85 3.35 3.55 [26.7] [29.2] [34.3] [41.9] [46.9] [47.1] [52.1] [54.6] [59.7] [72.4] [85.1] [90.2] 1.10 1.20 1.40 1.60 1.70 1.90 2.10 2.20 2.40 2.90 3.40 3.60 [27.9] [30.5] [35.6] [40.6] [43.2] [48.3] [53.3] [55.9] [61.0] [73.7] [86.4] [91.4] .24 POLARIZING NOTCHES PROVIDED B OR C (SEE NOTE 3) 6.1 B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C D .04 1.1 (SEE NOTE 2) .27 6.7 STRAIN RELIEF (SEE NOTE 1) C C POLARIZING KEY 3M PART NO: 3518 (ORDER SEPARATELY) EJECTOR/LATCH .177 .200 4.50 5.08 DIM. "G" DIM. "H" 78-5100-0086-8 E REVISION BREAKAWAY TAP .09 2.2 1.08 DRAWING NUMBER .042 .34 8.5 .162 B .115 4.11 B .02 0.6 2.92 .15 TABLE 2 DIMENSIONS EJECTOR/ LATCH OPTION SHORT LONG PART NUMBER DIM. "G" DIM. "H" DIM. "I" DIM. "J" 3M PART NO. MATERIAL COLOR N3518 LCP BLACK MATERIAL COLOR 3505-16 .335 [8.51] .726 [18.44] .92 [23.4] .41 [10.4] 3505-17 .484 [12.29] .875 [22.23] 1.07 [27.2] .56 [14.2] PBT GRAY E 96508 APR 08,2021 JNC SAN ADD U-SLOT GOLD FLASH NOTE D 94220 FEB 11,2021 JNC SAN REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DATE CASTIGLIONE FEB 10,2021 CHKD DATE DIVISION CODE C EMSD DO NOT SCALE DRAWING 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 8 4 1 INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 ISSUE DATE AND DESCRIPTION DRFT 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE S. NEU FEB 10,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE WIREMOUNT PLUG CONN., LATCH/EJECT, .100 X .100 CAGE SIZE NUMBER MODEL 4600 DRAWING NO. REV. 78-5100-0086-8 DET. LISTS 1 YES NO E SHT 3 OF 4 Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6 3.8 A 8 TM 3M 7 6 5 4 3 2 1 NOTES WIREMOUNT PLUG, 4600 SERIES .100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. 1 ACCEPTS #4 PAN HEAD MACHINE SCREW. 2 Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. FOR A REAR MOUNT PLUG CONNECTOR WITH EJECTOR/LATCHES, THE RECOMMENDED MAXIMUM PANEL THICKNESS IS .125 [3.18]. 3 WITHOUT POLARIZING KEYS .340[8.64]. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. D Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. TABLE 3 PIN PART DIM. "A" DIM. "B" QTY. NUMBER 10 4610 1.200 [30.48] .945 [24.00] 14 4614 1.400 [35.56] 1.145 [29.08] 16 4616 1.500 [38.10] 1.245 [31.62] 20 4620 1.700 [43.18] 1.445 [36.70] 24 4624 1.900 [48.26] 1.645 [41.78] 26 4626 2.00 [50.80] 1.745 [44.32] 30 4630 2.200 [55.88] 1.945 [49.40] 34 4634 2.400 [60.96] 2.145 [54.48] 36 4636 2.500 [63.50] 2.245 [57.02] 40 4640 2.700 [68.58] 2.445 [62.10] 50 4650 3.200 [81.28] 2.945 [74.80] 60 4660 3.700 [93.98] 3.445 [87.50] 64 4664 3.900 [99.06] 3.645 [92.58] C D Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect C .125 3.18 R.018 0.46 MIN. E MAX. 78-5100-0086-8 POLARIZING NOTCHES THIS SIDE (SEE NOTE 1) REVISION .450 11.43 .370 9.40 DRAWING NUMBER (SEE NOTE 3) .400 10.16 DIM. "B" MIN. .170 4.32 B B DIM. "A" E 96508 APR 08,2021 JNC SAN ADD U-SLOT GOLD FLASH NOTE D 94220 FEB 11,2021 JNC SAN REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DATE CASTIGLIONE FEB 10,2021 CHKD DATE DIVISION CODE C EMSD DO NOT SCALE DRAWING 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 8 4 1 INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 ISSUE DATE AND DESCRIPTION DRFT 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE S. NEU FEB 10,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE WIREMOUNT PLUG CONN., LATCH/EJECT, .100 X .100 CAGE SIZE NUMBER MODEL 4600 DRAWING NO. REV. 78-5100-0086-8 DET. LISTS 1 YES NO E SHT 4 OF 4 Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6 REAR MOUNT PANEL CUT-OUT A