HDC-R180-41S1-HM

3M™ HDC Socket .100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series • Ideal for parallel four-row PCB stacking • Press-Fit tail requires only flat push tool for installation • Mates with four-row single-bay headers and plugs • Optional feed-through tails • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: March 25, 2008  TS-1138-C Sheet 1 of 3 Physical Insulation: Material: Glass Filled Thermoplastic (LCP) Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 50 μ” [ 1.27 μm ] min. Nickel Wiping Area: See Ordering Information Termination Area: See Ordering Information Marking: Part Number and Date Code Electrical Current Rating: 3.0 A Insulation Resistance: 1 x 103 M Ω min. at 500 VDC Withstanding Voltage: 900 VAC for 1 minute Environmental Temperature Rating: -55°C to +105°C Process Rating: Maximum 260°C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ HDC Socket .100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series 4-Row Single Bay Inch [mm] Tolerance Unless Noted Inch .0 .00 .000 ±.1 ±.01 ±.005 [ ] Dimensions for Reference only TS-1138-C Sheet 2 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ HDC Socket .100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series Product Table/Dimensions for 4-Row, Single Bay Description Contact Quantity HDC-R060-41XX-XXXX 60 HDC-R076-41XX-XXXX 76 HDC-R080-41XX-XXXX 80 HDC-R100-41XX-XXXX 100 HDC-R120-41XX-XXXX 120 HDC-R128-41XX-XXXX 128 HDC-R140-41XX-XXXX 140 HDC-R160-41XX-XXXX 160 HDC-R168-41XX-XXXX 168 A B C D Description Contact Quantity 2.250 [57.15] 2.650 [67.31] 2.750 [69.85] 3.250 [82.55] 3.750 [95.25] 3.950 [100.33] 4.250 [107.95] 4.750 [120.65] 4.950 [125.73] 1.950 [49.53] 2.350 [59.69] 2.450 [62.23] 2.950 [74.93] 3.450 [87.63] 3.650 [92.71] 3.950 [100.33] 4.450 [113.03] 4.650 [118.11] 1.400 [35.56] 1.800 [45.72] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] 3.100 [78.74] 3.400 [86.36] 3.900 [99.06] 4.100 [104.14] 1.524 [38.71] 1.924 [48.87] 2.024 [51.41] 2.524 [64.11] 3.024 [76.81] 3.224 [81.89] 3.524 [89.51] 4.024 [102.21] 4.224 [107.29] HDC-R180-41XX-XXXX 180 HDC-R200-41XX-XXXX 200 HDC-R216-41XX-XXXX 216 HDC-R220-41XX-XXXX 220 HDC-R240-41XX-XXXX 240 HDC-R260-41XX-XXXX 260 HDC-R280-41XX-XXXX 280 HDC-R300-41XX-XXXX 300 HDC-R320-41XX-XXXX 320 A B C D 5.250 [133.35] 5.750 [146.05] 6.150 [156.21] 6.250 [158.75] 6.750 [171.45] 7.250 [184.15] 7.750 [196.85] 8.250 [209.55] 8.750 [222.25] 4.950 [125.73] 5.450 [138.43] 5.850 [148.59] 5.950 [151.13] 6.450 [163.83] 6.950 [176.53] 7.450 [189.23] 7.950 [201.93] 8.450 [214.63] 4.400 [111.76] 4.900 [124.46] 5.300 [134.62] 5.400 [137.16] 5.900 [149.86] 6.400 [162.56] 6.900 [175.26] 7.400 [187.96] 7.900 [200.66] 4.524 [114.91] 5.024 [127.61] 5.424 [137.77] 5.524 [140.31] 6.024 [153.01] 6.524 [165.71] 7.024 [178.41] 7.524 [191.11] 8.024 [203.81] Ordering Information HDC - RXXX - 41XX - XXXX Plating Options: (See Plating Chart) Contact Quantity: See Table Plating Suffix TR TG30 Termination Style / Lead length - Dim. F P1 - Press-fit / 0.250″ (6.35) P2 - Press-fit / 0.550″ (13.97) S1 - Solder / 0.157″ (3.99) Plating Chart (S1 & P1 Termination Styles ONLY) Solder Tail Terminations Plating Composition 3 µ" [0.08 µm] Min. Au over 7µ" [0.18 µm] PdNi area 1 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 100 µ" [2.54 µm] Min. Tin Lead area 4 50 µ" [1.27 µm] Min. Ni all over Press-Fit Terminations (RIA E2 & C2 apply) (RIA E3 & C2 apply) HM (RIA E1 & C1 apply) (RIA E1 & C1 apply) KR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 30 µ" [0.76 µm] Min. Au Area 1 100 µ" [2.54 µm] Min. Tin Lead Tail Area 4 50 µ" [1.27 µm] Min. Ni all over 3 µ" [0.08 µm] Min Au on Area 1 7 µ" [0.18 µm] PdNi on area 1 100 µ" [2.54 µm] Min. Whisker Mitigating Matte Tin on Area 4 50 µ" [1.27 µm] Min. Ni all over 30 µ" [0.76 µm] Min. Au on Area 1 100 µ" [5.08 µm] Min. Whisker Mitigating Matte Tin on Area 4 50 µ" [1.27 µm] Min. Ni all over µ Plating Chart (P2 Termination Styles ONLY) Solder Tail Terminations Plating Composition 30 µ" [0.76 µm] Min. Au on area 1 10 µ" [0.25 µm] Min. Au on area 2 GG30 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 100 µ" [2.54 µm] Min Tin Lead on area 3 50 µ" [1.27 µm] Ni all over 3 µ" [0.08 µm] Min. Au over 7µ" [0.18 µm] PdNi area 1 and 2 RR (RIA E2 & C2 apply) (RIA E3 & C2 apply) 100 µ" [2.54 µm] Min Tin Lead on area 3 50 µ" [1.27 µm] Min. Ni all over Plating Suffix Press-Fit Terminations TS-1138-C Sheet 3 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-D Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-D Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217A-D 3M is a trademark of 3M Company.