HM-PWR-HDR-08-LR

4 3 2 1 NOTES TH 3M POWER RIGHT ANGLE HEADER MODULE FOR HARD METRIC APPLICATIONS 1. MATERIAL: INSULATOR: GLASS FILLED THERMOPLASTIC (PBT) UL94V-0 CONTACTS: COPPER ALLOY. 2. PLATING -LR: CONTACT AREA: .08 .69 TAIL AREA: 2.54 m UNDERCOAT: 1.27 m +.10 3.00 -.30 D 9.70 3.00 2.00 3 X 2.00 = m MIN Au OVER m MIN PdNi MAX MATTE Sn MIN Ni. D 3. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) 3.00 6.00 2.00 POS C POS B POS A C 6. PART NUMBER: SEE TABLE 6.00 14.30 A B 12X C .60 7. FOR MATING PRODUCT USE: HM-PWR-SCK-01-XX POWER SOCKET CONNECTOR. .05 .05 8. PCB THICKNESS: 1.40mm MINIMUM. A D 5. IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. REVISION 15.70 DIM. "A" C DRAWING NUMBER 11.3 78-5100-2381-1 22.30 4. ELECTRICAL PERFORMANCE: TEMPERATURE RANGE: -55 C TO +125 C VOLTAGE: 1000 VAC rms CURRENT RATING: ALL LINES DRIVERS 9.0 AMPS @ 20 C 7.0 AMPS @ 70 C 4.5 AMPS @ 100 C 11.70 A 2.00 2X 3.50 B 3.00 3.00 2.00 .05 .05 A B 3.00 PCB LAYOUT BLADE POS. HEIGHT PART DESCRIPTION A 3MTM ELECTRONIC SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 HM-PWR-HDR-01-LR HM-PWR-HDR-02-LR HM-PWR-HDR-03-LR HM-PWR-HDR-04-LR HM-PWR-HDR-05-LR HM-PWR-HDR-06-LR HM-PWR-HDR-07-LR HM-PWR-HDR-08-LR HM-PWR-HDR-09-LR HM-PWR-HDR-10-LR HM-PWR-HDR-11-LR HM-PWR-HDR-12-LR HM-PWR-HDR-13-LR DIM. "A" POS A POS B POS C 10.9 10.9 10.9 9.3 10.9 9.3 9.3 10.9 7.6 9.3 7.6 9.3 10.9 9.3 7.6 9.3 9.3 7.6 7.6 7.6 10.9 7.6 9.3 10.9 10.9 9.3 10.9 7.6 7.6 7.6 10.9 9.3 9.3 9.3 7.6 10.9 10.9 9.3 9.3 D 3 MAY 11,2012 JNC TS MWL TS DRFT CHKD REVISE NOTE 4 AND REDRAWN C 36370 SEP 16,2011 REF ECO FOR REV CHANGES DESIGN REFERENCE NEXT ASSEMBLY DISTRIBUTION CODES DIVISION Interconnect Solutions DO NOT SCALE DRAWING SCALE THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS ALL SURFACES 2 REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE ML JAN 17,2011 CHKD DATE DIVISION CODE MARKED ONLY 4 40633 C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .30 .00 .20 .000 .10 ANGLES MN 55144 MFG DATE APPVL DATE TS JAN 17,2011 3M COPYRIGHT 2012 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE HM-PWR-HDR-XX-XX, POWER RIGHT ANGLE HEADER MODULE CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2381-1 DET. LISTS 1 YES NO D SHT 1 OF 1 A