8
TM
3M
7
6
5
4
3
2
1
NOTES
WIREMOUNT PLUG, 4600 SERIES
PERFORMANCE:
CURRENT RATING: 1.50 A, ALL CONTACTS POWERED
.100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE
1. REGULATORY INFORMATION:
VISIT 3M.com/regs
2. IN THE EVENT OF CONFLICT
BETWEEN THIS DATA AND THAT
CONTAINED IN THE PRODUCT
SPECIFICATION, THE PRODUCT
SPECIFICATION TAKES PRECEDENT.
2.25 A, 6 CONTACTS POWERED
5.50 A, 1 CONTACT POWERED
(RATING CONDITIONS:
EIA-364-070, METHOD 2, 30 C
MAXIMUM TEMPERATURE RISE)
UL & CUL VOLTAGE
RATING:
INSULATION
RESISTANCE:
WITHSTANDING
VOLTAGE:
OPERATING
TEMPERATURE:
D
STRAIN RELIEF
COVER
D
125VAC
> 1 x 109 Ohms AT 500 VDC
1000 VACrms AT SEA LEVEL
-55 C TO +105 C
AGENCY LISTINGS:
UNDERWIRTERS LABORATORIES (UL): FILE No. E68080
UL RATINGS
CUL RATINGS:
TEMPERATURE: 130 C
TEMPERATURE: 130 C
VOLTAGE: 125V
VOLTAGE: 125V
CURRENT: 1.0A
CURRENT: 1.0A
PHYSICAL:
46XX-X0X0
INSULATOR:
MATERIAL:
FLAMMABILITY:
COLOR:
CONTACT:
MATERIAL:
PLATING:
UNDER PLATING:
"U" SLOT:
WIPING AREA:
WIRE ACCOMMODATION:
MARKINGS:
C
C
COPPER ALLOY
100 " [2.54 m] NICKEL-OVERALL
GOLD FLASH
30 " [0.76 m] GOLD
26 AND 28 AWG SOLID AND STRANDED
3M LOGO AND LOT NUMBER
E
REVISION
1
DIM. "I"
REF.
GLASS FILLED POLYESTER (PBT)
UL94V-0
GRAY
78-5100-0086-8
DIM. "J"
DRAWING NUMBER
46XX-X0X1
B
STRAIN RELIEF
(ORDER SEPARATELY)
46XX-X0X5
CONTACT QTY:
(SEE TABLE 1)
COVER STYLE:
6=OPEN END
(DAISY CHAINING/BUSSING
STANDARD)
7=CLOSED END
(END CABLE TERMINATION)
A
3448-46XX
ORDERING INFORMATION
46XX-XXXX
CONTACT QTY:
(SEE TABLE 1)
BODY STYLE:
0=W/MOUNTING FLANGE (STANDARD)
1=W/OUT MOUNTING FLANGE
5=MOUNTING FLANGE W/THREADED INSERT
FROM SOCKET MATING SIDE
E
DIMENSIONS: INCH [MM]
[MM] FOR REF. ONLY
POLARIZATION:
0=FOR CONTACT QTY 14 TO 64
0=FOR NOTCH C ON 10 POSITION
5=FOR NOTCH B ON 10 POSIITON
DESIGN REFERENCE
3M IS A TRADEMARK OF 3M COMPANY.
FOR TECHNICAL, SALES OR ORDERING
INFORMATION CALL 800-225-5373
8
NEXT ASSEMBLY
ACCESS
CODES
DIVISION
6
5
94220
DO NOT
SCALE
DRAWING
4
JNC SAN
R
2
1
THIRD ANGLE PROJECTION
MAX SURFACE ROUGHNESS
ALL SURFACES
3
2
INCHES
.0
.1
.00
.01
.000
.005
.0000
.0002
MILLIMETERS
0
.0
.00
.000
ANGLES
JNC SAN
REVISED AND REDRAWN
REV
ECO
ISSUE DATE AND DESCRIPTION
DRFT
DATE
CASTIGLIONE
FEB 10,2021
CHKD
DATE
C
3M Center
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
SCALE
INTERPRET PER
ASME Y14.5 - 2018
UL FILE NO: E68080
FEB 11,2021
DIVISION CODE
MARKED ONLY
7
D
EMSD
ASSEMBLY TOOLS:
3MTM PRESS 3640 (OR EQUIVALENT),
3MTMLOCATOR PLATE 3443-96,
3MTM PLATTEN 3442-9
APR 08,2021
ADD U-SLOT GOLD FLASH
NOTE
EJECTOR/LATCH SYSTEM:
0=NONE (STANDARD)
2=SHORT EJECTOR LATCH (3505-16)
3=LONG EJECTOR LATCH (3505-17)
3M ELECTRONICS MATERIALS SOLUTIONS DIVISION
INTERCONNECT SOLUTIONS
http://www.3M.com/interconnect
96508
MN
55144
DRFT
CHKD
MFG
DATE
APPVL
DATE
S. NEU
FEB 10,2021
3M COPYRIGHT 2021
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
WIREMOUNT PLUG
CONN., LATCH/EJECT,
.100 X .100
CAGE SIZE
NUMBER
MODEL
4600
DRAWING NO.
REV.
78-5100-0086-8
DET.
LISTS
1
YES
NO
E
SHT 1 OF 4
Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6
B
A
8
TM
3M
7
6
5
4
3
2
1
NOTES
WIREMOUNT PLUG, 4600 SERIES
1
POLARIZATION OF 10 POSITION
PRODUCT CAN BE EITHER:
- CENTER NOTCH B: 4610-XX5X
- NOTCH C: 4610-XX0X.
2
NOTCHES A AND C WILL
ACCOMMODATE 3M POLARIZATION
KEY PART NO. 3518.
.100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE
DIM. "D"
D
.25
D
6.4
2X #4-40 UNC X [.14 [3.6] LG
THREADED INSERT
TORQUE SPEC: 3-5 IN/LB
.16
4.1
OPTIONAL CLOSED
END COVER
.050
TYP.
1.27
THREADED INSERT
MOUNTING FLANGES
NONCONDUCTIVE TRANSFER
ADHESIVE WITH LINER
OPEN COVER
C
C
NOTCH B
SEE TABLE 1
.050
NOTCH C
SEE TABLE 1
AND NOTE 2
NOTCH A
SEE TABLE 1
AND NOTE 2
1.27
.235 5.97
DIM. "F"
.525
78-5100-0086-8
E
REVISION
13.34
.17
2X OPTIONAL
EJECTOR/LATCH
POSITION 1
ORIENTATION
TRIANGLE
DRAWING NUMBER
4.3
NO MOUNTING FLANGES
.155
B
2.54
.100
2X
.12 3.2
B
0.25
POSITION 1
2.54
A
.165 4.20
.25
6.4
.33 8.4
A
DIM. "B"
POSITION 2
DIM. "F"
.25 6.4
E
96508
APR 08,2021
ADD U-SLOT GOLD FLASH
NOTE
DIM. "C"
D
DIM. "A"
.025
SQ.
TYP.
DESIGN REFERENCE
.24 6.2
NEXT ASSEMBLY
ACCESS
CODES
DIVISION
A-A
DO NOT
SCALE
DRAWING
3M ELECTRONICS MATERIALS SOLUTIONS DIVISION
INTERCONNECT SOLUTIONS
http://www.3M.com/interconnect
3M IS A TRADEMARK OF 3M COMPANY.
FOR TECHNICAL, SALES OR ORDERING
INFORMATION CALL 800-225-5373
2
1
MAX SURFACE ROUGHNESS
ALL SURFACES
MARKED ONLY
5
4
ECO
JNC SAN
3
ISSUE DATE AND DESCRIPTION
DRFT
DATE
CASTIGLIONE
FEB 10,2021
CHKD
DATE
C
3M Center
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
SCALE
THIRD ANGLE PROJECTION
6
FEB 11,2021
DIVISION CODE
INTERPRET PER
ASME Y14.5 - 2018
7
REV
EMSD
SECTION
SCALE 4x
8
94220
REVISED AND REDRAWN
0.64
SLOTTED
MOUNTING FLANGES
A
JNC SAN
2
INCHES
.0
.1
.00
.01
.000
.005
.0000
.0002
MILLIMETERS
0
.0
.00
.000
ANGLES
MN
55144
DRFT
CHKD
MFG
DATE
APPVL
DATE
S. NEU
FEB 10,2021
3M COPYRIGHT 2021
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
WIREMOUNT PLUG
CONN., LATCH/EJECT,
.100 X .100
CAGE SIZE
NUMBER
MODEL
4600
DRAWING NO.
REV.
78-5100-0086-8
DET.
LISTS
1
YES
NO
E
SHT 2 OF 4
Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6
.100
3.94
.010
A
8
TM
3M
7
6
5
4
3
2
1
NOTES
WIREMOUNT PLUG, 4600 SERIES
1
MATERIAL:
.012 [0.30] THK STAINLESS STEEL.
2
THE DISTANCE FROM THE STRAIN
RELIEF TO THE CONNECTOR IS
EQUAL TO .04 [1.0] PLUS THE
CABLE THICKNESS.
3
POLARIZATION OF 10 POSITION
PRODUCT CAN BE EITHER:
- CENTER NOTCH B: 4610-XX5X
- NOTCH C: 4610-XX0X.
.100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE
DIM. "E"
TABLE 1
DIMENSIONS
D
PIN
QTY.
DIM. "A"
DIM. "B"
DIM. "C"
DIM. "D"
DIM. "E"
DIM. "F"
10
1.50 [38.1]
.71 [18.0]
1.20 [30.5]
.77 [19.6]
.85 [21.6]
.90 [22.9]
14
16
20
24
26
30
34
36
40
50
60
64
1.70 [43.2]
1.80 [45.7]
2.00 [50.8]
2.20 [55.9]
2.30 [58.4]
2.50 [63.5]
2.70 [68.6]
2.80 [71.1]
3.00 [76.2]
3.50 [88.9]
4.00 [101.6]
4.20 [106.7]
.91 [23.1]
1.01 [25.7]
1.21 [30.7]
1.41 [35.8]
1.51 [38.4]
1.71 [43.4]
1.91 [48.5]
2.01 [51.1]
2.21 [56.1]
2.71 [68.8]
3.21 [81.5]
3.41 [86.6]
1.40
1.50
1.70
1.90
2.00
2.20
2.40
2.50
2.70
3.20
3.70
3.90
[35.6]
[38.1]
[43.2]
[48.3]
[50.8]
[55.9]
[61.0]
[63.5]
[68.6]
[81.3]
[94.0]
[99.1]
.97 [24.6]
1.07 [27.2]
1.27 [32.3]
1.47 [37.3]
1.57 [39.9]
1.77 [45.0]
1.97 [50.0]
2.07 [52.6]
2.27 [57.7]
2.77 [70.4]
3.27 [83.1]
3.47 [88.1]
1.05
1.15
1.35
1.55
1.65
1.85
2.05
2.15
2.35
2.85
3.35
3.55
[26.7]
[29.2]
[34.3]
[41.9]
[46.9]
[47.1]
[52.1]
[54.6]
[59.7]
[72.4]
[85.1]
[90.2]
1.10
1.20
1.40
1.60
1.70
1.90
2.10
2.20
2.40
2.90
3.40
3.60
[27.9]
[30.5]
[35.6]
[40.6]
[43.2]
[48.3]
[53.3]
[55.9]
[61.0]
[73.7]
[86.4]
[91.4]
.24
POLARIZING
NOTCHES
PROVIDED
B OR C
(SEE NOTE 3)
6.1
B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
D
.04 1.1
(SEE NOTE 2)
.27
6.7
STRAIN RELIEF
(SEE NOTE 1)
C
C
POLARIZING KEY
3M PART NO: 3518
(ORDER SEPARATELY)
EJECTOR/LATCH
.177
.200
4.50
5.08
DIM. "G"
DIM. "H"
78-5100-0086-8
E
REVISION
BREAKAWAY
TAP
.09
2.2
1.08
DRAWING NUMBER
.042
.34
8.5
.162
B
.115
4.11
B
.02
0.6
2.92
.15
TABLE 2
DIMENSIONS
EJECTOR/
LATCH
OPTION
SHORT
LONG
PART
NUMBER
DIM. "G"
DIM. "H"
DIM. "I"
DIM. "J"
3M PART NO. MATERIAL COLOR
N3518
LCP
BLACK
MATERIAL COLOR
3505-16 .335 [8.51] .726 [18.44] .92 [23.4] .41 [10.4]
3505-17 .484 [12.29] .875 [22.23] 1.07 [27.2] .56 [14.2]
PBT
GRAY
E
96508
APR 08,2021
JNC SAN
ADD U-SLOT GOLD FLASH
NOTE
D
94220
FEB 11,2021
JNC SAN
REVISED AND REDRAWN
DESIGN REFERENCE
NEXT ASSEMBLY
ACCESS
CODES
A
DIVISION
REV
ECO
DATE
CASTIGLIONE
FEB 10,2021
CHKD
DATE
DIVISION CODE
C
EMSD
DO NOT
SCALE
DRAWING
3M ELECTRONICS MATERIALS SOLUTIONS DIVISION
INTERCONNECT SOLUTIONS
http://www.3M.com/interconnect
8
4
1
INTERPRET PER
ASME Y14.5 - 2018
MAX SURFACE ROUGHNESS
ALL SURFACES
MARKED ONLY
7
6
5
4
3
3M Center
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
SCALE
THIRD ANGLE PROJECTION
3M IS A TRADEMARK OF 3M COMPANY.
FOR TECHNICAL, SALES OR ORDERING
INFORMATION CALL 800-225-5373
ISSUE DATE AND DESCRIPTION
DRFT
2
INCHES
.0
.1
.00
.01
.000
.005
.0000
.0002
MILLIMETERS
0
.0
.00
.000
ANGLES
MN
55144
DRFT
CHKD
MFG
DATE
APPVL
DATE
S. NEU
FEB 10,2021
3M COPYRIGHT 2021
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
WIREMOUNT PLUG
CONN., LATCH/EJECT,
.100 X .100
CAGE SIZE
NUMBER
MODEL
4600
DRAWING NO.
REV.
78-5100-0086-8
DET.
LISTS
1
YES
NO
E
SHT 3 OF 4
Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6
3.8
A
8
TM
3M
7
6
5
4
3
2
1
NOTES
WIREMOUNT PLUG, 4600 SERIES
.100 X .100, LATCH/EJECT CONNECTOR FOR .050" PITCH CABLE
Regulatory: For regulatory information about this product, visit 3M.com/regs
or contact your 3M representative.
1
ACCEPTS #4 PAN HEAD MACHINE SCREW.
2
Technical Information: The technical information, recommendations and other
statements contained in this document are based upon tests or experience that
3M believes are reliable, but the accuracy or completeness of such information
is not guaranteed.
FOR A REAR MOUNT PLUG CONNECTOR
WITH EJECTOR/LATCHES, THE
RECOMMENDED MAXIMUM PANEL
THICKNESS IS .125 [3.18].
3
WITHOUT POLARIZING KEYS
.340[8.64].
Product Use: Many factors beyond 3M's control and uniquely within user's control
can affect the use and performance of a 3M product in a particular application.
Given the variety of factors that can affect the use and performance of a
3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user's
method of application.
D
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is
specifically stated on the applicable 3M product packaging or product literature,
3M warrants that each 3M product meets the applicable 3M product specification at
the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive
remedy is, at 3M's option, replacement of the 3M product or refund of the purchase
price.
TABLE 3
PIN
PART
DIM. "A"
DIM. "B"
QTY. NUMBER
10
4610 1.200 [30.48] .945 [24.00]
14
4614 1.400 [35.56] 1.145 [29.08]
16
4616 1.500 [38.10] 1.245 [31.62]
20
4620 1.700 [43.18] 1.445 [36.70]
24
4624 1.900 [48.26] 1.645 [41.78]
26
4626
2.00 [50.80] 1.745 [44.32]
30
4630 2.200 [55.88] 1.945 [49.40]
34
4634 2.400 [60.96] 2.145 [54.48]
36
4636 2.500 [63.50] 2.245 [57.02]
40
4640 2.700 [68.58] 2.445 [62.10]
50
4650 3.200 [81.28] 2.945 [74.80]
60
4660 3.700 [93.98] 3.445 [87.50]
64
4664 3.900 [99.06] 3.645 [92.58]
C
D
Limitation of Liability: Except where prohibited by law, 3M will not be liable for
any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including
warranty, contract, negligence or strict liability.
3M Company
Electronics Materials Solutions Division
13011 McCallen Pass, Bldg. C
Austin, TX 78753-5380
1-800-225-5373
www.3M.com/interconnect
C
.125 3.18
R.018 0.46
MIN.
E
MAX.
78-5100-0086-8
POLARIZING NOTCHES
THIS SIDE
(SEE NOTE 1)
REVISION
.450 11.43
.370 9.40
DRAWING NUMBER
(SEE NOTE 3)
.400
10.16
DIM. "B"
MIN.
.170
4.32
B
B
DIM. "A"
E
96508
APR 08,2021
JNC SAN
ADD U-SLOT GOLD FLASH
NOTE
D
94220
FEB 11,2021
JNC SAN
REVISED AND REDRAWN
DESIGN REFERENCE
NEXT ASSEMBLY
ACCESS
CODES
A
DIVISION
REV
ECO
DATE
CASTIGLIONE
FEB 10,2021
CHKD
DATE
DIVISION CODE
C
EMSD
DO NOT
SCALE
DRAWING
3M ELECTRONICS MATERIALS SOLUTIONS DIVISION
INTERCONNECT SOLUTIONS
http://www.3M.com/interconnect
8
4
1
INTERPRET PER
ASME Y14.5 - 2018
MAX SURFACE ROUGHNESS
ALL SURFACES
MARKED ONLY
7
6
5
4
3
3M Center
St. Paul,
TOLERANCES
EXCEPT AS
NOTED
SCALE
THIRD ANGLE PROJECTION
3M IS A TRADEMARK OF 3M COMPANY.
FOR TECHNICAL, SALES OR ORDERING
INFORMATION CALL 800-225-5373
ISSUE DATE AND DESCRIPTION
DRFT
2
INCHES
.0
.1
.00
.01
.000
.005
.0000
.0002
MILLIMETERS
0
.0
.00
.000
ANGLES
MN
55144
DRFT
CHKD
MFG
DATE
APPVL
DATE
S. NEU
FEB 10,2021
3M COPYRIGHT 2021
This document and the information it contains are
3M property and may not be reproduced or further
distributed without 3M permission, or used or
disclosed other than for 3M authorized purposes.
All rights reserved.
TITLE
WIREMOUNT PLUG
CONN., LATCH/EJECT,
.100 X .100
CAGE SIZE
NUMBER
MODEL
4600
DRAWING NO.
REV.
78-5100-0086-8
DET.
LISTS
1
YES
NO
E
SHT 4 OF 4
Imaged: Central Standard Time 4/8/2021 -- UTC Offset (hrs) 6
REAR MOUNT PANEL CUT-OUT
A