T/R+BOX

3M™ Wire Connector T/R+ (Tan/Red) LISTED 540H Wire Connector Data Sheet Application Use a 3M™ Wire Connector T/R+ to electrically connect two or more conductor ends in a pigtail application and insulate the connection. Wire AWG Range: COPPER conductors only, No. 22 thru No. 8 solid and/or stranded (see wire matrix for specific wire combinations). METRIC Range: COPPER conductors only, 0,5 mm2 thru 6,0 mm2 ridged (solid) and flexible (stranded). Construction Spring - Spring steel, corrosion resistant coating Insulator: - Flame retardant, polypropylene, tan and thermoplastic elastomer, red Weight .0068 lbs. (3.1 g) Performance Test The following tests were performed to the specification of UL Standard 486C and CSA Standard C22.2 No. 188M1983. Static-Heating Pass Secureness Pass Pullout Pass Dielectric Voltage Withstand Pass Secureness-of-Insulation Pass Flammability Pass Canadian Standards Association Standard NO. 22.2 NO. 188-M1983 3M File NO. LR15503 Other Tests: per MIL-STD-1344A Method 2005.1UV Exposure Pass Per ASTM G-53-77 Salt Spray Pass Fluid Immersion Test Connectors were immersed in the following chemicals for seven days at 23˚C±2˚C with no affect on appearance or loss of material strength. Typical Reagents and Materials From ASTM D 543-87 and MIL-STD-1344A Acetic Acid Acetone Detergent Solution, Heavy Duty Ethyl Alcohol (95%) Ethyl Alcohol (50%) Heptane Hydrogen Peroxide Solution 28% Methyl Alcohol Sodium Hydroxide Solution Mineral Spirit Lubricating Oil Engineering Specification 3M Wire Connector T/R+ is capable of connecting two or more wires in a pigtail application, in the wire range of No. 22 thru No. 8 AWG solid and/or stranded copper conductors. The connector shall be constructed of an active (live) spring with a corrosion resistant coating. The connector shall be UL LISTED and CSA Certified as a pressure wire connector. The connector shall be voltage rated 600 volts maximum building wire and 1000 volts maximum signs and lighting fixtures (luminaries). The connector shall have a maximum operating temperature of 105˚C (221˚F). 3M™ Wire Connector T/R+ AWG Wire Combinations Copper to Copper Conductors How to read this chart: Example 1: 1 No. 18 str + 4 No. 20 solid or str (5 total) Example 2: 1 No. 12 sol + 2 No. 12 str (3 total) Installation Instructions Regulatory Agencies ! CAUTION Working around energized systems may cause serious injury or death. Installation should be performed by personnel familiar with good safety practice in handling electrical equipment. De-energize and ground all electrical systems before installing product. 1. Strip wire insulation 1/2”. 2. Firmly grasp wires, making sure insulation ends are even and tightly bundled. (Wires may be twisted or untwisted.) Lead stranded wires slightly. Slip the connector over wire tips. 3. Turn connector onto wires in clockwise direction until secure. 4. To remove, turn connector counter- clockwise. UL Listed as a Pressure Cable Connector Tested per UL Standard 486C UL File No. E23438 Operating Temperature: 105˚C (221˚F) Voltage Rating: 600 volts max. building wire; 1000 volts max. signs and fixtures Flammability Rating: UL94 V-2 CSA Certified-CSA Standard C22.2 No. 0, 188-M1983 CSA File No. LR15503 Operating Temperature: 105˚C (221˚F) Voltage Rating: 600 volts max. building wire 1000 volts max. signs and luminaires. Flammability Rating: C22.2 No. 0.6 V-2 Operating Temperature: 105˚C (221˚F) Voltage Rating: 600 volts max. building wire; 1000 volts max. signs and fixtures Flammability Rating: UL94 V-2 Federal Specification W-S-610: “Commercial package only” Type Class Kind 1 1 Cu Style G Metric Wire Combinations Copper Conductors Only Cross Section Capacity Minimum Maximum 2.0mm2 12.5mm2 Conductor Combinations Quantity Size Type 6 0,5mm2 sol/str 3-6 0,75mm2 sol/str 2-6 1,0mm2 sol/str 2-6 1,5mm2 sol/str 2.5 2,5mm2 sol/str 2.3 4.0 mm2 sol/str Only AWG combinations are UL Listed or CSA Certified. 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product, which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electrical Markets Division Austin, TX Phone: 800-245-3573 www.3M.com/electrical Please Recycle. Printed in USA. © 3M 2019. All Rights Reserved. 78-8126-0603-0 Rev B