Advanced Power Electronics Corp.
APE1117A
GENERAL DESCRIPTION
APE1117A is a low dropout positive adjustable or fixed-mode regulator with minimum of 1A output current capability.The regulator is able to operate with output Capacitors as small as 1uF Ceramic Capacitor for stability.The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. APE1117A is also well suited for other applications such as VGA cards. APE1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply.
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
FEATURES
- 1.4V maximum dropout at full load current - Fast transient response - Output current limiting - Built-in thermal shutdown - Needs Only 1uF Capacitor for stability - Good noise rejection - 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 1.9V, 2.5V, 3.3V, 5.0V - Low ESR Ceramic Capacitor for output stability - Packages: SOT-223, TO-252, SOT-89, - RoHS Compliant
APPLICATIONS
- PC peripheral - Communication - LCD Modules
ORDERING INFORMATION
APE1117A X -XX
Low Dropout Regulator
Package
K : SOT-223-3L Blank : ADJ 15 : 1.5V H : TO-252-3L 18 : 1.8V G : SOT-89-3L 19 : 1.9V 25 : 2.5V 33 : 3.3V 50 : 5.0V
Vout
TYPICAL CIRCUIT
5V 5V C1 1uF Vin Vout GND Tab is Vout C2 1uF 3.3V/1A Vin Vout Adj Tab is Vout R1 121 Ω R2 121 Ω Vo 2.5V/1A C1 1uF
C2 1uF
( 5V/3.3V fixed output )
( 5V/2.5V ADJ output )
Note: Vo = VREF ∗ (1+
R2 ) R1
This datasheet contains new product information. Advanced Power Electronics Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.
1 200804176
Advanced Power Electronics Corp.
APE1117A
CONNECTION DIAGRAM
3 PIN SOT-223 ( Top View )
3 2 1
3 PIN TO-252
( Top View )
Vin Vout Adj (GND)
3 2 1 Tab is Vout
Vin Vout Adj (GND)
Tab is Vout
3 PIN SOT-89
3 2 1 Tab is Vout
Vin Vout Adj (GND)
BLOCK DIAGRAM
Vin
3
2
Vout
+ +
-
CURRENT LIMIT 1.25V
+
1
+
GND (FIXED)
-
Thermal Shutdown
1
Adj
Advanced Power Electronics Corp. www.a-power.com.tw
2
Advanced Power Electronics Corp.
APE1117A
PIN DESCRIPTIONS
NAME I/O PIN # FUNCTION
Adj (GND)
I
1
A resistor divider from this pin to the Vout pin and ground sets the output voltage. (Ground only for Fixed-Mode) The output of the regulator. A minimum of 1uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. A minimum of 1uF capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.4V higher than Vout in order for the device to regulate properly.
Vout
O
2
Vin
I
3
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Rating
Unit
Vin PD T ST TOP
DC Supply Voltage Power Dissipation SOT-223 SOT-89 TO-252
-0.3 to 16 850 330 1050 -65 to +150 0 to +150
V mW oC oC
Storage Temperature Operating Junction Temperature Range
Advanced Power Electronics Corp. www.a-power.com.tw
3
Advanced Power Electronics Corp.
APE1117A
ELECTRICAL CHARACTERISTICS (Under Operating Conditions)
PARAMETER Reference Voltage APE1117A-ADJ APE1117A-1.5 APE1117A-1.8 APE1117A-1.9 Output Voltage APE1117A-2.5 APE1117A-3.3 APE1117A-5.0 Line Regulation APE1117A-XXX APE1117A-ADJ APE1117A-1.5 APE1117A-1.8 Load Regulation APE1117A-1.9 APE1117A-2.5 APE1117A-3.3 APE1117A-5.0 Dropout Voltage (VIN-VOUT) CONDITIONS o TJ=25 C,(VIN-OUT)=1.5V IO=10mA o IOUT = 10mA, TJ = 25 C, 3V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 3.3V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 3.3V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 4V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 4.8V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 6.5V≦VIN≦12V TJ=25oC VIN=3.3V,Vadj=0,0mA
很抱歉,暂时无法提供与“APE1117AH-33”相匹配的价格&库存,您可以联系我们找货
免费人工找货