RHP-100A-R02JNT

HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 Custom solutions are available. HOW TO ORDER RHP-10A-100 F Y R Packaging (50 pieces) T = tube or R= tray (flanged type only) TCR (ppm/°C) Y = +50 Z = +100 N = +250 Tolerance J = +5% F = +1% Resistance R02 = 0.02 Ω R10 = 0.10 Ω 1R0 = 1.00 Ω 100 = 10.0 Ω 101 = 100 Ω 512 = 51.0K Ω 100A FEATURES 20W, 35W, 50W, 100W, and 140W available TO126, TO220, TO263, TO247 packaging Surface Mount and Through Hole technology Resistance Tolerance from ±5% to ±1% TCR (ppm/°C) from ±250ppm to ±50ppm Complete thermal flow design Non-Inductive impedance characteristic and heat venting through the insulated metal tab Durable design with complete thermal conduction, heat dissipation, and vibration APPLICATIONS RF circuit termination resistors CRT color video amplifiers Suits high-density compact installations High precision CRT and high speed pulse handling circuit High speed SW power supply Power unit of machines VHF amplifiers Motor control Industrial computers Drive circuits IPM, SW power supply Automotive Volt power sources Measurements Constant current sources AC motor control Industrial RF power RF linear amplifiers Precision voltage sources Custom Solutions are Available – For more information, send your specification tosales@aacix.com. Size/Type (refer to spec) 10X 20B 50A 10B 20C 50B 10C 20D 50C Series High Power Resistor CONSTRUCTION – shape X and A 1 2 3 4 5 6 Molding Leads Conductor Resistor Substrate Flange Epoxy Tin plated Cu Copper Ni-Cr Alumina Ni plated Cu there is insulation between the flange and the resistor SCHEMATIC X A B C D DIMENSIONS (mm) Model Shape A B C D E F G H J K L M N P RHP-10X X 8.5 ± 0.2 12.0 ± 0.2 3.1 ± 0.2 3.1 ± 0.1 17.0 ± 0.1 3.2 ± 0.5 3.8 ± 0.2 1.75 ± 0.1 0.5 ± 0.05 0.6 ± 0.05 1.4 ± 0.05 5.08 ± 0.1 RHP-10B B 8.5 ± 0.2 12.0 ± 0.2 3.1 ± 0.2 3.1 ± 0.1 17.0 ± 0.1 3.2 ± 0.5 3.8 ± 0.2 1.75 ± 0.1 0.5 ± 0.05 0.6 ± 0.05 1.4 ± 0.05 5.08 ± 0.1 RHP-10C C 10.1 ± 0.2 15.0 ± 0.2 4.5 ± 0.2 3.6 ± 0.1 5.0 ± 0.1 2.5 ± 0.5 3.0 ± 0.2 2.75 ± 0.1 0.5 ± 0.05 0.75 ± 0.05 RHP-20B B 10.1 ± 0.2 15.0 ± 0.2 4.5 ± 0.2 3.6 ± 0.1 15.5 ± 0.1 4.0 ± 0.5 3.0 ± 0.2 2.75 ± 0.2 0.5 ± 0.05 0.75 ± 0.05 RHP-20C C 10.1 ± 0.2 15.0 ± 0.2 4.5 ± 0.2 3.6 ± 0.1 5.0 ± 0.1 2.5 ± 0.5 3.0 ± 0.2 2.75 ± 0.2 0.5 ± 0.05 0.75 ± 0.05 RHP-20D D 10.1 ± 0.2 10.3 ± 0.2 4.5 ± 0.2 5.0 ± 0.1 2.5 ± 0.5 2.2 ± 0.2 2.75 ± 0.2 0.5 ± 0.05 0.75 ± 0.05 RHP-50A A 16.0 ± 0.2 20.0 ± 0.5 4.8 ± 0.2 3.2 ± 0.1 14.5 ± 0.1 5.1 ± 0.5 3.63 ± 0.2 0.8 ± 0.05 10.9 ± 0.1 - RHP-50B B 10.6 ± 0.2 15.0 ± 0.2 4.5 ± 0.2 1.5 ± 0.1 2.7 ± 0.1 5.08 ± 0.5 0.75 ± 0.2 0.5 ± 0.2 1.5 ± 0.05 19 ± 0.05 2.7 ± 0.05 3.6 ± 0.1 15 ± 0.05 - RHP-50C C 10.6 ± 0.2 15.0 ± 0.2 4.5 ± 0.2 1.5 ± 0.1 2.7 ± 0.1 5.08 ± 0.5 0.75 ± 0.2 0.5 ± 0.2 1.5 ± 0.05 19 ± 0.05 2.7 ± 0.05 3.6 ± 0.1 2.0 ± 0.05 - RHP-100E A 16.0 ± 0.2 20.0 ± 0.5 4.8 ± 0.2 3.2 ± 0.1 14.5 ± 0.5 5.1 ± 0.5 3.63 ± 0.2 0.8 ± 0.05 10.9 ± 0.1 - 1.5 ± 0.05 5.08 ± 0.1 1.5 ± 0.05 - 1.5 ± 0.05 5.08 ± 0.1 1.5 ± 0.05 16.0 ± 0.5 1.5 ± 0.05 5.08 ± 0.1 1.5 ± 0.05 - 1.5 ± 0.05 5.08 ± 0.1 1.5 ± 0.05 - American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 1 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 OVERVIEW Model Physical (top & bottom view) Features TO126 Package 20W high power resistor 5.9 C/W heat resistance from hot spot to flange. 0.10 ohm to 220 ohm resistance range RHP-10X RPH-10B TO220 Package Through hole RHP-10B 20W high power 5.9 C/W heat resistance from hot spot to flange via thin film metallization technology 0.10 ohm to 220 ohm resistance range TO220 Package Surface mount RHP-10C 10W high power 5.9 C/W heat resistance from hot spot to flange via thin film metallization technology 0.10 ohm to 220 ohm resistance range RHP-10C RHP-20B TO220 Package Through hole RHP-20B 35W high power 3.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.02 ohm to 220 ohm resistance range RHP-20C TO220 Package Surface mount RHP-20C 20W 3.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.02 ohm to 220 ohm resistance range TO263 (D2P) Package - Surface Mount Molded 20W high power resistor 3.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.01 ohm to 51K ohm resistance range RHP-20D RHP-50A TO247 Package 100W high power resistor 1.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.01 ohm to 220 ohm resistance range RHP-50B TO220 Package Through hole RHP-50B 50W high power 2.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.10 ohm to 220 ohm resistance range RHP-50C TO220 Package Surface mount RHP-50C 50W high power 2.3 C/W heat resistance from hot spot to flange via thin film metallization technology 0.10 ohm to 220 ohm resistance range TO247 Package 140W high power resistor 0.9 C/W heat resistance from hot spot to flange or metal back plate. via thin film metallization technology 0.02 ohm to 220 ohm resistance range RHP-100A American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 2 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 ELECTRICAL SPECIFICATIONS Model Rated Power(heat sink) Rated Power Heat Resistance Withstanding Voltage Max. Operating Voltage RHP-10X 20W 1W 5.9 C/W 2000V AC - RHP-10B 20W 1W 5.9 C/W 2000V DC 500V or √P*R 0.01 ~ 0.091 E6 ±250 ±5% RHP-10C 20W 1W 5.9 C/W 2000V DC 500V or √P*R RHP-20D 20W 2W 3.3 C/W 2000V DC 500V or √P*R RHP-20B 35W 1W 3.3 C/W 2200V DC (1500V AC) 500V or √P*R RHP-20C 20W 1W 3.3 C/W 2200V DC (1500V AC) 500V or √P*R Resistance Nominal Resistance TCR (ppm°C) Tolerance Operating Temp. Model Rated Power(heat sink) Rated Power Max. Applied Power Heat Resistance Withstanding Voltage Max. Operating Voltage 0.10 ~ 9.1 E24 ±100 ±5%, ±1% -55C°C ~ +155°C 10 ~ 220 E24 ±50 ±1% RHP-50A 100W 3W 100W 1.3 C/W 2500V AC 700V or √P*R (applied) 0.01~0.091 RHP-50B & RHP-50C 50W 1W 2.3 C/W 2000V DC 500V or √P*R 0.1 ~ 9.1 E24 ±100 ±5%, ±1% 10 ~ 220 E24 ±50 ±1% -55C°C ~ +155°C RHP-100A 140W 3W 0.9 C/W 2500V AC 700V or √P*R (applied) 0.02~0.091 Resistance Nominal Resistance TCR (ppm°C) Tolerance Operating Temp. 0.1 ~ 9.1 E12 ±100 ±5%, ±1% 10 ~ 220 E24 ±50 ±1% 0.1 ~ 9.1 E12 ±100 ±5%, ±1% 10 ~ 220 E24 ±50 ±1% E6 > ±250 ±5% E6 > ±250 ±5% Resistance Range from 240 ohm to 51K ohm is available as a semi-custom solution for al of the RHP series. Values such as 2.0, 2.5, 4.0, and 5.0 are available upon special request. PERFORMANCE Item Rated Power Rated Power (without heat sink) Withstanding Voltage Load Life Humidity Temperature Cycle All other models RHP-10X All other models; RHP-20B & 20C (0.10 ~ 220Ω) RHP-20B & 20C (0.02 ~ 0.091Ω) All other models; RHP-20B & 20C (0.10 ~ 220Ω) Soldering Heat RHP-50A, 100A RHP-20B & 20C (0.02 ~ 0.091Ω) Solderability Insulation Resistance Vibration All other models RHP-10X, RHP-50A, 100A All other models RHP-50A, 100A All other models RHP-20D Performance As specified As specified As specified As specified As specified ± (1.0%+0.05Ω) ± (1.0%+0.05Ω) ± (0.25%+0.05Ω) ± (1.0%+0.05Ω) ± (0.1%+0.05Ω) ± (0.25%+0.05Ω) ± (0.5%+0.05Ω) > 95% of the surface > 75% of round > 1,000 Meg Ω ± (0.25%+0.05Ω) The performance data applies to all RHP models unless otherwise noted. 230°C±5°C for 3 sec. Between terminals and metal back plate 350°C±5°C for 3 sec. Free Air Attached on a simple footprint 60 seconds 25°C, 90 min on, 30 min. off, 1000 hrs. 40°C, 90-95% RH, DC 0.1W, 1000 hrs. 60°C, 90-95% RH, DC 0.1W, 1000 hrs. -55°C, 30 min., +155°C 30min, 5 cycles Condition -55°C ~ +25°C flange temperature American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 3 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 RHP-10X RHP-10B, RHP-10C American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 4 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 RHP-20B, RHP-20C RHP-20D American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 5 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 RHP-50A RHP-50A-1000FY with 0.71C/W heat sink RHP-50A-1000FY with 0.71 C/W heat sink American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 6 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 RHP-50B, RHP-50C RHP-100A American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 7 HIGH POWER RESISTOR – 20W to 140W The content of this specification may change without notification 12/07/07 NOTES GENERAL 1. 0.1% tolerance resistors and resistance range from 240 ohm to 51K ohm are available as a semi-custom solution 2. Use of heat conduction grease on surface of flange is recommended. 3. Insulation material is unnecessary between flange and resistors; the flange and resistor are separated by alumina substrate. 4. It surface mount soldering, temperature profile in the flange shall not exceed 220°C. 5. Heat sink design will be performed when the resistor operating temperature is less than 155°C RHP-10X 1. Heat resistance between resistor and flange is 3.6K/W 2. For application to r-f circuit, Lead formed RHP-10X (smd) is prepared; RHP-10X are screw mount style. 3. At resistance from 220 to 51kohms rating power shall be restricted in 10W. RHP-10B, RHP-10C 1. Heat resistance between resistor and flange is 5.9 C/W. RHP-20B, RHP-20C 1. Heat resistance between resistor and flange is 3.3 C/W 2. At resistance from 220 to 51kohms rating power shall be restricted in 20W. 3. The terminal material is Tin plated copper, but inside of resistor contains PbAg high melting solder that is exempted by RoHS directive 2002/95/EC. RHP-20D 1. At flange soldering, temperature profile in flange shall not exceed 270°C for 30 minutes. 2. Heat resistance between resistor and flange is 3.3C/W. 3. This model shall be fit to Copper of printed wiring board with lower temperature solder than 220°C. Sn-Cu soldering will be done by soldering iron with 300°C -350°C tip temperature for less than 30 minutes. RHP-50A 1. Using heat conduction grease on surface of flange is recommended. 2. Heat resistance between resistor and flange is 1.3 K/W. Heat design will be done, as resistor temperature shall be under 155°C in operation. RHP-50B, RHP-50-C 1. Heat resistance between resistor and flange is 3.3 C/W. 2. 5ppm TCR resistors are available as a semi-custom product 3. At resistance from 220 to 51kohms rating power shall be restricted in 30W. 4. Please note, terminal material is Tin plated copper, but inside of resistor contains PbAg high melting solder that is exempted by RoHS directive 2002/95/EC. RHP-100A Recommendation 1. Flat surface heat sink, thermal compound and sufficient mount screw torque will be necessary for good heat transfer. 2. In a rush current protection application, such as charge current limitation resistor, sufficient power derating will be necessary. Design for Heat Release TAPE DIMENSIONS (mm) Reel Dimensions Outer Diameter: 300mm Inner Diameter: 100mm Width: 23.9mm min., 27.4mm max Standard packaging is RoHS PS/PE tube packaging, which contains 50 pieces per tube. When ordering, note Tube (T) or Tray (R) American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 8