AXH016A0X3-SR

GE Data Sheet 16A Austin SuperLynxTM: Non-Isolated DC-DC Power Modules 3Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc output; 16A Output Current Features RoHS Compliant Applications  Compliant to RoHS EU Directive 2011/65/EU (-Z versions)  Compliant to RoHS EU Directive 2011/65/EU under exemption 7b (Lead solder exemption). Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant (non-Z versions)  Delivers up to 16A of output current  High efficiency – 95% at 3.3V full load (VIN = 5.0V)  Small size and low profile:  33.00 mm x 13.46 mm x 8.28 mm  (1.300 in x 0.530 in x 0.326 in)  Low output ripple and noise  High Reliability:  Calculated MTBF > 6.8M hours at 25oC Full-load  Output voltage programmable from 0.75 Vdc to 3.63Vdc via external resistor  Distributed power architectures  Line Regulation: 0.3% (typical)  Intermediate bus voltage applications  Load Regulation: 0.4% (typical)  Telecommunications equipment  Temperature Regulation: 0.4% (typical)  Servers and storage applications  Remote On/Off  Networking equipment  Remote Sense  Output overcurrent protection (non-latching)  Overtemperature protection  Wide operating temperature range (-40°C to 85°C)  UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed  ISO** 9001 and ISO 14001 certified manufacturing facilities Description Austin SuperLynxTM SMT (surface mount technology) power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (VIN = 3.0 – 5.5Vdc). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, programmable output voltage, overcurrent and overtemperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ January 20, 2016 ©2016 General Electric Company. All rights reserved. GE Data Sheet 16A Austin SuperLynxTM: Non-Isolated DC-DC Power Modules 3Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc output; 16A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 5.8 Vdc All TA -40 85 °C All Tstg -55 125 °C Input Voltage Continuous Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ 3.0  Max Unit Operating Input Voltage VO,set ≤ VIN – 0.5V VIN Maximum Input Current All IIN,max 5.5 Vdc 16.0 Adc VO,set = 0.75 Vdc IIN,No load 70 mA VO,set = 3.3Vdc IIN,No load 70 mA All IIN,stand-by 1.5 mA Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 100 Input Ripple Rejection (120Hz) All 30 (VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc) Input No Load Current (VIN = 5.0Vdc, IO = 0, module enabled) Input Stand-by Current (VIN = 5.0Vdc, module disabled) 0.1 A 2s mAp-p dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 20A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. January 20, 2016 ©2016 General Electric Company. All rights reserved. Page 2 GE Data Sheet 16A Austin SuperLynxTM: Non-Isolated DC-DC Power Modules 3Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc output; 16A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set –2.0  +2.0 % VO, set All VO, set –3%  +3% % VO, set All VO 0.7525 3.63 Vdc (VIN=IN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All  0.3 % VO, set Load (IO=IO, min to IO, max) All  0.4 % VO, set Temperature (Tref=TA, min to TA, max) All  0.4 % VO, set RMS (5Hz to 20MHz bandwidth) All  8 15 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All  25 50 mVpk-pk μF Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Cout = 1μF ceramic//10μFtantalum capacitors) External Capacitance ESR ≥ 1 mΩ All CO, max   1000 ESR ≥ 10 mΩ All CO, max   3000 μF Output Current All Io 0  16 Adc Output Current Limit Inception (Hiccup Mode ) All IO, lim  180  % Io Output Short-Circuit Current All IO, s/c  3.5  Adc (VO≤250mV) ( Hiccup Mode ) Efficiency VO,set = 0.75Vdc η 82.0 VIN= VIN, nom, TA=25°C VO, set = 1.2Vdc η 87.0 % IO=IO, max , VO= VO,set VO,set = 1.5Vdc η 89.0 % VO,set = 1.8Vdc η 90.0 % VO,set = 2.5Vdc η 92.5 % VO,set = 3.3Vdc η 95.0 % All fsw  300  kHz All Vpk  300  mV Settling Time (Vo