LPF2015T-150M-C

LPF2015-C SERIES ■SHAPES & DIMENSIONS RECOMMENDED PCB PATTERN (Dimensions in mm) 2.0±0.2 1.4MAX SMD Shielded type ■ELECTRICAL CHARACTERISTICS Ordering Code Inductance (µ H) 1.5 2.2 3.3 4.7 6.8 10.0 15.0 Inductance TOL.(%) DC Resistance Rated Current ( Ω )Max. [A] Max. ( )is typical value. LPF2015T-1R5M-C 2.0±0.2 0.15(0.12) 0.20(0.17) 0.28(0.24) 0.90 0.75 0.60 0.50 0.40 0.30 0.25 LPF2015T-2R2M-C LPF2015T-3R3M-C LPF2015T-4R7M-C 0.92 2.3 ± 20 0.33(0.30) 0.50(0.46) 0.85(0.81) 1.05(1.00) LPF2015T-6R8M-C LPF2015T-100M-C 0.92 2.3 1.4 LPF2015T-150M-C 1.4 ■TEST EQUIPMENTS • Inductance: Agilent 4284A LCR Meter (100KHz 0.5V) • Rdc: HIOKI 3540 mΩ HiTESTER • Bias Current: Agilent 4284A + Agilent 42841A • Rate Current: △L ≤ 30% reduction from nominal L value or △T ≤ 40˚C typical at rated current whichever is lower ■OPERATING TEMPERATURE RANGE -30 ~ +85˚C (Including self-temp. rise) LPF3010 SERIES (Dimensions in mm) 2.8±0.2 1.0±0.1 1.2 SMD Shielded type 100 ■SHAPES & DIMENSIONS RECOMMENDED PCB PATTERN 3.1 Inductance(uH) 10 22µH 15µH 10µH 6.8µH 4.7µH 3.3µH 2.2µH 2.8±0.2 2R 2 3.7±0.2 0.6 1.2 3.1 1.7 1 1.5µH 1.7 0.1 1 10 100 Current(mA) 1000 10000 ■TEST EQUIPMENTS • Inductance: Agilent 4284A LCR Meter (100KHz 0.5V) • Rdc: HIOKI 3540 mΩ HiTESTER • Bias Current: Agilent 4284A + Agilent 42841A • IDC1(The saturation current): △L ≤ -35% reduction from nominal L value • IDC2(The temperature rise): △T = 40˚C typical at rated current ■ELECTRICAL CHARACTERISTICS Ordering Code LPF3010T-1R5N LPF3010T-2R2N LPF3010T-3R3N LPF3010T-4R7N LPF3010T-6R8N LPF3010T-100N LPF3010T-150N LPF3010T-220N Test DC Resistance Inductance Inductance Freq. ( Ω )Max. (µ H) TOL.(%) ( KHz) ( )is typical value. 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 Rated Current[A] IDC1 ( Max.) 1.20 1.00 0.87 0.70 0.61 0.45 0.40 0.33 IDC2 ( Typ.) 1.90 1.20 1.10 1.00 0.83 0.56 0.46 0.41 Marking 1R5 2R2 3R3 4R7 6R8 100 150 220 ± 30 0.097(0.082) 0.110(0.098) 0.200(0.180) ■OPERATING TEMPERATURE RANGE -30 ~ +85˚C (Including self-temp. rise) ± 20 100 0.280(0.260) 0.340(0.320) 0.580(0.530) 0.860(0.790) 1.130(1.030) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. 17 POWER INDUCTORS