RTN02-10T

THICK FILM CHIP RESISTORS NETWORK • RTN02-10T ■CONSTRUCTION Overcoating 473 ■DIMENSIONS L1 L2 473 Alumina Substrate Plating(Ni+Sn) 473 L1 L2 H Q L P S W R T E Unit: mm Type Dimensions RTN02-10T L 3.20 ± 0.20 W 1.60 ± 0.15 H 0.55 ± 0.10 L1 0.30 ± 0.15 L2 0.30 ± 0.15 P 0.64 ± 0.10 Q 0.32 ± 0.10 ■Standard electrical specifications Type Rated Power at 70˚C 1 W 16 Max. Working Voltage Max. Overload Voltage Resistance T.C.R. (ppm/˚C) J(± 5%) E-12 Number of Terminals Number of Resistors Operating Temperature Range RTN02-10T 25V 50V ± 20 33Ω~1MΩ 10 8 -55˚C ~+125˚C ■EXPLANATION OF PART NUMBERS (EX) RTN Type Chip Resistors Networks T : Sn(Ti) Process 02 Size 02 10 Number of Circuits 10 T Circuit Structure (see above) 103 Nominal Resistance • 3-Digit: E12 Series Ex 10Ω=100 1KΩ=102 J Resistance Tolerance J = ± 5% TP Packing TP: Taping(Paper) 76 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. • RTN02-10T ■CHARACTERISTICS Item Temperature Cycling Low Temperature Operation Short Time Overload Resistance to Soldering Heat Loading Life in Moisture Resistance to dry heat Load Life Solderability Dielectric Withstanding Voltage *RCWV=Rated Continuous Working Voltage 5% Test Method JIS-C5202-7.4 Cycle between -55˚C and +125˚C for 5 cycles MIL-R-55342-D 4.7.4 Followed by 45 Minutes of RCWV. JIS-C5202-5.5 Apply rated voltage 2.5 times for 5 seconds JIS-C5202-6.10 Immerse for 10 sec. in solder at 260 ± 3˚C JIS-C5202-7.9 40˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-7.2 96Hrs at 125˚C JIS-C5202-7.10 70˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-6.11 Immerse for 3 sec. in solder at 245 ± 3˚C JIS-C5202-5.7 Apply 300VAC for 1min ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) ± (2.0% + 0.10Ω) ± (1.0% + 0.10Ω) ± (2.0% + 0.10Ω) ± (2.0% + 0.10Ω) ± (3.0% + 0.10Ω) Coverage 95% No short or burned on the appearance ■TAPING SPECIFICATIONS Carrier Tape T2 ¿1.5 +0.1 +0 P0 E T2 B A F W T1 EMBOSSED CARRIER P P1 DIRECTION OF FEED PAPER CARRIER ■PACKAGING: TP Type RTN02-10T A 3.5 ± 0.2 B 1.9 ± 0.2 W 8.0 ± 0.2 E 1.75 ± 0.1 F 3.5 ± 0.1 P0 4.0 ± 0.1 P 4.0 ± 0.1 P1 2.0 ± 0.1 T1 - Unit: mm T2 0.75 ± 0.10 ■REEL SPECIFICATION Type RTN02-10T W 12.5 M 178 A 2.0 B 13.5 C 21.0 Unit: mm D 60.0 B C A D M ± 1.5 ± 2.0 ± 0.5 ± 0.5 ± 0.5 ± 2.0 ■BULK CASE Type TP 5,000 TE - Unit: pcs W RTN02-10T Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. 77 CHIP RESISTORS