ACH

CRYSTAL CLOCK OSCILLATORS 5Vdc • HCMOS/ TTL COMPATIBLE HALF-SIZE DIP AC H 12.7 x 12.7 x 5.6 mm FEATURES: APPLICATIONS: • Wide frequency range. • Tight symmetry option. • Fast rise and fall times. • HCMOS and TTL compatible. • Tristate Enable / Disable function. • Anti-Static packaging tube. • Provide clock signals for microprocessors and digital circuits. • High output drive capability applications. STANDARD SPECIFICATIONS PARAMETERS Frequency Range Operating Temperature (TOPR) Storage Temperature (TSTO) Frequency Stability (DF/ Fo) Supply Voltage (Vdd) Input Current Duty Cycle or Symmetry (I dd) (Fo) S PECIFICATIONS 32.768k Hz - 200MHz 0°C to +70°C (See Options) -55°C to +125°C ±100ppm max. (See Options) 5Vdc ±10% 30mA max. for F< 24MHz 70mA max. for F< 80MHz _ 45mA max. for F< 50MHz 85mA max. for F> 80MHz 45 / 55% max. for F < 50MHz @ 1/2Vdd (See Options) _ 40 / 60% max. for F > 50MHz @ 1/2Vdd (See Options) _ 10ns max. for F < 24MHz Rise and Fall Times (TR / TF) 5ns max. for F > 24MHz Output Load 10TTL or 15pF (50pF max.) for Fo < 80MHz _ 5TTL or 15pF for (Fo) > 80MHz Output Voltage Start-up Time Tristate Function (Option “-A” ONLY) 0.9 *Vdd min. (VOH) ; 0.4Vdc max. (VOL) (TOSC) 10ms max. (VIH) “1” or Open: Oscillation > 2.2V _ (VIL) “0”:Output disabled in high impedance (Hi Z) < 0.8V 100ns max. (for Option “- A” ONLY) Dimensions: Inches (mm) PIN NUMBER FUNCTION Output Disable / Enable Time * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) Option A. Test circuit, waveforms, see appendix B.. Environmental and mechanical specifications, see appendix C. Group 1. Marking, see appendix G. Recommended handling, see appendix F. Application notes, see appendix A. Reflow profile see appendix E. 1 4 5 8 NC or Tristate E/D GND / Case Output Vdd ACH - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate XX.XXXX MHz or kHz -D for -10°C to + 60°C -E for -20°C to + 70°C -F for -30°C to + 70°C -N for -30°C to + 85°C -L for -40°C to + 85°C -Y for ± -J for ± -R for ± -K for ± -H for ± -C for ± 10ppm max** 20ppm max 25ppm max 30ppm max 35ppm max 50ppm max -S for 45 / 55% -T for 47.5 / 52.5% -S1 for 45 / 55% -T 1 for 47.5 / 52.5% 1/2Vdd 1/2Vdd @ 1.4Vdc @ 1.4Vdc @ @ ORDERING OPTIONS I - 50 - Value Added - Packaging - T for tape and reel -TY for Tray packing 50pF load output drive - A for Tristate E/D ABRACON 54 ** Standard Operating Temperature Only Frequency 50 MHz max. -G Gull Wing -G2 Gull Wing -GHT Gull Wing Reflow capable -QXX (Trimmed Leads) ® NOTE: Left blank if standard • All specifications and markings subject to change without notice C O R P O R AT I O N 29 J ourney • A liso V iejo, C A 9 2656 • U SA (949) 4 48-7070 • F AX : ( 949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: ww w. abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED