AP2S_08

SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR AP2S FEATURES: • Performance comparable to fixed frequency oscillator • Lowest peak-to-peak jitter • Low supply current • Short lead time • Suitable for mass production • Alternative to long lead-time XO's For Small Quantities, Delivery Time is 1-5 days Maximum 110 90 75 60 100 3.63 2.75 1.98 25 15 10 -0.33 0.25 0.18 ---55 10 --- Pb RoHS Compliant 2.5 x 2.0 x 0.9mm ||||||||||||||| ELECTRICAL SPECIFICATIONS: Characteristics Frequency Range (3.3V) (2.5V) (1.8V) Operating Temp. Range (See Options) Freq. stability over operating temp.* (See Options) Unit MHz MHz MHz °C ppm V V V mA mA mA pF V V V V V V % uA nSec nSec Minimum 3 3 3 -10 -100 2.97 2.25 1.62 Typical -----3.3 2.5 1.8 Input Voltage (Operating Vdd) Input Current Input Current Input Current Output Type Output Load Output "0" level (3.3V) (2.5V) (1.8V) CMOS (3.3V) (2.5V) (1.8V) (3.3V) (2.5V) (1.8V) ----2.97 2.25 1.62 45 ---15 ------50 -2.5 2.5 pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable 30 to 70 Output "1" level Symmetry Standby Curent Rise Time (10%->90% Vdd) Fall Time (90%->10% Vdd) Tri-state Function (Input to pin 1) Jitter peak-to-peak** psec -- -- * Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. ** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info. OPTIONS & PART IDENTIFICATION: (Left blank if standard) AP2S -Frequency- - - - Supply Voltage Blank* 3.3 V 1 2.5 V 2 1.8 V *3.3V : Standard Operating Temp. 0°C to +50°C I -10°C to +60°C D -20°C to +70°C E -30°C to +70°C F -30°C to +85°C N -40°C to +85°C L Freq. Stability ±20ppm J(**) ±25ppm R ±30ppm K ±35ppm H ±40ppm B ±50ppm C **Blank PIN 1(Option) OE **B PDB Packaging B Bulk T Tape and Reel Ask for Tube Package (* * *)Available for I, D, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited) ** OE: Tri-state the output buffer. ** PDB: Tri-state the output buffer and shut off the oscillator,