ASMPH-0603-R22M-T

SMD Multilayer Chip Power Inductor ASMPH-0603 RoHS/RoHS II Compliant Pb FEATURES: High DC bias current due to trench technology Much lower profile than any other series Monolithic structure for high reliability Excellent solderability and heat resistance Magnetically shielded structure to eliminate cross coupling 1.6 x 0.8 x 0.8mm APPLICATIONS: ASMPH family is a miniature type of multilayer power inductors constructed using low loss ferite material to support high-speed switching frequencies.The compact size and high efficiency is ideal for DC/DC converter applications in space limited boards. Switching mode regulators for smart phones and cameras. Buck convertersfor RFIC, RFPA and Audio Codec modules. Boost converters for flash drivers. Wireless cards, DVD players and other electronic devices. ELECTRICAL SPECIFICATIONS: Operating Temperature: -55 C to +125 C Component Storage Temperature: -55 C to +125 C Package Storage Temperature: -10 C to + 40 C Part Number ASMPH-0603Inductance Code Inductance Tolerance Units μH Symbol L ASMPH-0603-R22 0.22 % M=±20% N=±30% M, N ASMPH-0603-R33 DCR (Typ) DCR (Max) SRF Min. Temperature Rise Current (Max) Saturation Current (Typ) Saturation Current (Max) Ω Ω MHz mA mA mA DCR DCR SRF Irms Isat Isat 0.10 0.13 200 1250 1600 1350 0.33 M, N 0.13 0.17 190 1200 1500 1250 ASMPH-0603-R47 0.47 M, N 0.15 0.19 180 1100 1200 1000 ASMPH-0603-R68 0.68 M, N 0.18 0.23 160 1150 1100 950 ASMPH-0603-1R0 1.0 M, N 0.20 0.25 125 1000 800 650 ASMPH-0603-1R5 1.5 M, N 0.23 0.29 100 900 500 420 ASMPH-0603-2R2 2.2 M, N 0.30 0.38 80 850 300 250 ASMPH-0603-2R7 2.7 M, N 0.34 0.43 90 750 220 180 ASMPH-0603-3R3 3.3 M, N 0.40 0.50 100 700 150 125 ASMPH-0603-4R7 4.7 M, N 0.40 0.50 65 700 80 65 Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 20±15 C b. Relative Humidity: 65±20% c. Air Pressure: 86 kPa to 106 kPa Inductance (L): HP4291B+HP16192A or Equivalent, tested at 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Irms is the value of DC current as chip surface temperature rose just 40°C against chip initial surface temperature. Isat is the value of DC current inductance decreased just 30% against initial value. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 03-28-19 ISO9001-2015 CERTIFIED SMD Multilayer Chip Power Inductor ASMPH-0603 RoHS/RoHS II Compliant Pb 1.6 x 0.8 x 0.8mm PART IDENTIFICATIONS: ASMPH-0603Inductance Code Please refer to the table abo Tolerance M=±20% N=±30% Packaging T: Tape and Reel (4kpcs / reel) OUTLINE DRAWING: Recommended Land Pattern L W T a 1.60±0.15 0.8±0.15 0.8±0.15 0.3±0.2 A B C 0.60~0.80 0.60~0.80 0.60~0.80 Dimension: mm MATERIALS: Side View Top View 1 2 3 LLC 4 1 2 3 Part Name Base Material Internal Conductor Pull out Electrode 4 Terminal Electrode 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Material Ferrite Ag Ag Ag (Inner layer) Ni-Sn (Outer layer) ABRACON IS REVISED: 03-28-19 ISO9001-2015 CERTIFIED SMD Multilayer Chip Power Inductor ASMPH-0603 Pb RoHS/RoHS II Compliant 1.6 x 0.8 x 0.8mm REFLOW PROFILE: Preheat Condition Allowed time above 217 Max temperature Max time at max temperature Solder paste Allowed Reflow time 150 to 200 C; 60 to 120 sec. 60 to 90 sec. 260 10 sec. Sn/3.0Ag/0.5Cu 2x max. TAPE & REEL: Packing T: 4,000pcs / reel 4.3 ±0.2 mm A B P T (max) 1.0±0.2 1.8±0.2 4.0±0.1 1.1 8.4+1.5/ -0.0mm 2.45 ±0.2 mm 4.0 ±0.1 mm 5.0 ±0.1 mm 58 ±2.0 mm 13. 5±0 .2 mm 3.0 ±0.1 mm max ＜14.4mm 178 ±2.0 mm Dimension: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 03-28-19 ISO9001-2015 CERTIFIED