ASPI-0704S-330M-T

SMD SHIELDED POWER INDUCTOR ASPI-0704S Pb FEATURES: RoHS Compliant 7.3 x 7.3 x 4.5m m | | | | | | | | | | | | | | APPLICATIONS: STANDARD SPECIFICATIONS: Operating temperature: Storage temperature: Operating Voltage (maximum): Part Number ASPI-0704S-1R0M ASPI-0704S-1R5M ASPI-0704S-2R2M ASPI-0704S-3R3M ASPI-0704S-3R9M ASPI-0704S-4R7M ASPI-0704S-5R6M ASPI-0704S-6R8M ASPI-0704S-100M ASPI-0704S-120M ASPI-0704S-150M ASPI-0704S-180M ASPI-0704S-220M ASPI-0704S-270M ASPI-0704S-330M ASPI-0704S-390M ASPI-0704S-470M ASPI-0704S-560M ASPI-0704S-680M ASPI-0704S-820M ASPI-0704S-101M ASPI-0704S-121M ASPI-0704S-151M ASPI-0704S-181M ASPI-0704S-221M ASPI-0704S-271M ASPI-0704S-331M ASPI-0704S-391M ASPI-0704S-471M ASPI-0704S-561M ASPI-0704S-681M ASPI-0704S-821M ASPI-0704S-102M -40ºC to +125ºC (including self-generated heat) +15ºC to +28ºC Voltage across inductor: 400V Inductance DC Resistance (μH) (Ω) 1.0 0.020 1.5 0.018 2.2 0.028 3.3 0.032 3.9 0.035 4.7 0.038 5.6 0.040 6.8 0.045 10 0.049 12 0.058 15 0.081 18 0.091 22 0.110 27 0.150 33 0.170 39 0.230 47 0.260 56 0.350 68 0.380 82 0.430 100 0.610 120 0.660 150 0.880 180 0.980 220 1.170 270 1.640 330 1.860 390 2.850 470 3.010 560 3.620 680 4.630 820 5.200 1000 6.000 IDC (A) 8.00 7.00 6.00 4.80 4.40 4.00 3.5 3.00 1.84 1.71 1.47 1.31 1.23 1.12 0.96 0.91 0.88 0.75 0.69 0.61 0.60 0.52 0.46 0.42 0.36 0.34 0.32 0.29 0.26 0.23 0.22 0.20 0.18 Marking 1R0 1R5 2R2 3R3 3R9 4R7 5R6 6R8 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 Test Conditions and Equipment 1. Frequency: 1KHz, 0.25V 2. Rated DC Current: The DC current at which the inductance becomes 25% lower than its initial value or when Δt =40°C, whichever is lower. (Ta=25°C) 3. L: HP4284A or HP4285A LCR meter 4. DCR: Milli-ohm meter 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 03-04-21 ISO9001-2015 CERTIFIED | SMD SHIELDED POWER INDUCTOR ASPI-0704S Pb RoHS 7.3 x 7.3 x 4.5m m Compliant | | | | | | | | | | | | | | PART NUMBER IDENTIFICATION: (Left Blank if Standard) ASPI-0704S - Packaging Inductance Code Please refer to the table above T: Tape and Reel (1kpcs / reel) OUTLINE DRAWING: Recommended Landing Pattern Dimensions: Inches (mm) P a rt# ASPI-0704S-xxx A 0.287±0.008 (7.3±0.2) B 0.287±0.008 (7.3±0.2) C 0.177 max (4.5 ma x. ) 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com D 0.06 3 (1.60 ) E 0.18 9 (4.80 ) F 0.09 (2.20) ABRACON IS REVISED: 03-04-21 ISO9001-2015 CERTIFIED | SMD SHIELDED POWER INDUCTOR ASPI-0704S Pb RoHS Compliant 7.3 x 7.3 x 4.5m m | | | | | | | | | | | | | | TAPE AND REEL: Tape and reel (1,000pcs/reel) Dimension: mm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 03-04-21 ISO9001-2015 CERTIFIED | SMD SHIELDED POWER INDUCTOR ASPI-0704S Pb RoHS Compliant 7.3 x 7.3 x 4.5m m | | | | | | | | | | | | | | REFLOW PROFILE: 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 25 2 t 25˚C to Peak Time Zone Description 1 Preheat / Soak 2 3 Peak heat Temperature TSMAX 150°C ~ 180°C Time 60 ~ 120 sec. TL 230°C 30 ~ 40 sec. TP 255°C ~ 265°C 10 sec. MAX ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 03-04-21 ISO9001-2015 CERTIFIED |