ACT200A

Tel: 0044 (0)118 979 1238 Fax: 0044 (0)118 979 1283 E-mail: info@actcrystals.com ACT200A The ACT200A is a miniature SMD Watch Crystal with excellent low power consumption, making it ideal for portable applications. Its small footprint makes it suitable for high density circuit boards and applications where PCB space is limited. The tape and reel packaging means that it is ideal for automatic placement machines (loose product is also available). The heart of the device is a heat resistant precision tuning fork, cylinder type, crystal which provides for good stability characteristics, sufficient to allow reflow soldering. Applications include: Clock, Sub Clock, Small Communications Devices, Microcomputer etc. Specification Parameter Nominal Frequency Frequency Tolerance Frequency v Temp Characteristics Turnover Temperature Freq. Temp. coefficient Temp Operating Range Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Motional Capacitance Capacitance Ratio Drive Level Insulation Resistance Aging (first year) Symbol fo Δf/fo Δf/fo Tm β Topr Tstg ESR Co CL C1 γ DL IR Fa Specification 32.768KHz ±20ppm ( ±5ppm option) See drawing 25°C ±5°C -0.04 ppm/°C² -40 ~ +85°C -55 ~ +125°C 50KΩ max 0.9pF Typical 12.5pF & 6.0pF 1.8fF Typical 450 Typical 1μW max 500MΩ min ±3ppm max Condition @25°C -10 ~ +60°C @25°C Please specify @ DC 100V ±15V 25°C ±3°C Do not connect ~2 and ~3 to external device. Metal may be exposed on the top or bottom surface of this product. This will not effect any quality, reliability or electrical specifications. Please note that all parameters can not necessarily be specified in the same device Customer to specify: Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK Issue 1 E2 Date 20-12-06 http://www.actcrystals.com 1 of 2 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 info@actcrystals.com ACT200A Tape and Reel specification Standard reel quantity 3000 pieces per reel DIMENSIONS (mm) AØ 330 REEL BØ 80 OR 100 TAPE W 17.5 A 8 B 9.25 C 16 D 2.7 SOLDERING of SMD WATCH CRYSTALS Reflow oven should be set up to emulate or better the maximum reflow profile shown in the diagram below. Note it is just as important to conform to the times given as well as the temperatures. In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK Issue 1 E2 Date 20-12-06 http://www.actcrystals.com 2 of 2