689-3P

681(e3) and 689(e3) series Available Center Tap and Doubler, Standard and Fast Recovery Rectifiers DESCRIPTION Standard and fast recovery rectifier assemblies available in center tap or doubler configurations in electrically isolated aluminum casing. (Actual appearance may vary) Important: For the latest information, visit our website http://www.microsemi.com. FEATURES ND Package • Current ratings to 15 amps • • • • • V RWM from 100 to 600 volts (see part nomenclature for all options) 150 ºC junction temperature Surge ratings to 150 amps Recovery times to 500 ns RoHS compliant versions available APPLICATIONS / BENEFITS • • Electrically isolated aluminum case Controlled avalanche characteristics MAXIMUM RATINGS Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T J and T STG R ӨJC R ӨJA I FSM IO -65 to +150 ºC 6.0 20 150 15 10.5 260 ºC/W ºC/W A A Thermal Resistance Junction-to-Case Thermal Resistance Junction-to-Ambient Forward Surge Current (Peak): @ T C = 100 ºC Maximum Average DC Output Current: @ T C = 55 ºC @ T C = 100 ºC Solder Temperature @ 10 s o C MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01151, Rev A, (12/19/13) ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 1 of 6 681(e3) and 689(e3) series MECHANICAL and PACKAGING • • • • • CASE: Aluminum TERMINALS: Tin/lead or RoHS compliant matte tin MARKING: Alternating current input: AC Cathode positive output: + Anode negative: Part number is printed on the body WEIGHT: Approximately 30 grams See Package Dimensions on last page. PART NOMENCLATURE 681 -1 P (e3) Series type number 681 = Std Recovery Rectifier 689 = Fast Recovery Rectifier RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant V RWM level -1 = 100 V -2 = 200 V -3 = 300 V -4 = 400 V -5 = 500 V -6 = 600 V SYMBOLS & DEFINITIONS Definition Symbol I FSM IO VF IR V RWM t rr Terminal Configuration P = Center Tap Positive N = Center Tap Negative D = Doubler Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B) Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Forward Voltage: A positive dc anode-cathode voltage the device will exhibit at a specified forward current. Reverse Current: The dc current flowing from the external circuit into the cathode terminal at the specified voltage V R . Working Peak Reverse Voltage: The peak voltage excluding all transient voltages (ref JESD282-B). Also sometimes known historically as PIV. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs. RF01151, Rev A, (12/19/13) ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 2 of 6 681(e3) and 689(e3) series ELECTRICAL CHARACTERISTICS PART NUMBER MAX FORWARD VOLTAGE PER LEG VF (Note 1) 681 689 @ 25 ºC Volts 1.2 @ 10 A 1.2 @ 10 A NOTES: 1. 681-1 681-2 681-3 681-4 681-5 681-6 RF01151, Rev A, (12/19/13) @ 25 ºC µA 10 10 @ 100 ºC µA 200 200 MAX REVERSE RECOVERY TIME t rr (I F = 1.0 A, I RM = 1.0 A, I R(REC) = 0.5 A) ns 500 MAX WORKING PEAK REVERSE VOLTAGE (V RWM ) numbering: PART NUMBER 2. MAX REVERSE PEAK CURRENT I R @ V RRM 689-1 689-2 689-3 689-4 689-5 689-6 WORKING PEAK REVERSE VOLTAGE V RWM MINIMUM BREAKDOWN VOLTAGE V (BR) Volts 100 200 300 400 500 600 Volts 110 220 330 440 550 660 Pulse test: Pulse width 300 µsec, duty cycle 2%. ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 3 of 6 681(e3) and 689(e3) series Instantaneous Forward Current - Amperes GRAPHS Instantaneous Forward Voltage – Volts Leakage Current - uA FIGURE 1 Typical Forward Characteristics – Per Leg % of Rated Voltage FIGURE 2 Typical Reverse Leakage Current – Per Leg RF01151, Rev A, (12/19/13) ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 4 of 6 681(e3) and 689(e3) series DC Output Current GRAPHS (continued) Case Temperature – ºC FIGURE 3 Current Derating RF01151, Rev A, (12/19/13) ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 5 of 6 681(e3) and 689(e3) series PACKAGE DIMENSIONS Notes: Orientation of terminals shown for “D”. For “P” or “N” center terminal is 90° from the AC terminals. Ltr A B C (dia) D E F G H J K Dimensions Inches MIN MAX 0.660 0.09 TYP 0.165 0.175 2.240 2.260 1.870 1.880 1.480 1.490 0.334 0.354 0.40 TYP 0.115 0.135 0.302 0.322 Dimensions Millimeters MIN MAX 16.76 2.29 TYP 4.19 4.45 56.90 57.40 47.50 47.75 37.59 37.85 8.48 8.99 1.02 TYP 2.92 3.43 7.67 8.18 PACKAGE DIMENSIONS RF01151, Rev A, (12/19/13) ©2013 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 sales.support@microsemi.com Page 6 of 6