APPLICATION NOTE
Atmel RFID Kits Overview
ATAN0075
RFID Kits Introduction
Atmel® offers several design and evaluation kits for a fast and easy way to test the LF-RFID
technology but also developing the final product. The most important one is the Atmel
ATA2270-EK3. It provides a complete self-contained tool to begin using RFID systems,
even for users who are short on RFID experience. It supplies an LCD and control buttons to
enable interaction with the RFID system. This stand-alone but also PC-GUI based system
supports many of Atmel's RFID tag chips.
The second group of kits is based on two readers supplied by an external company. One of
them is working at 125kHz (Atmel ATARFID-EK1) the other one at 134.2kHz (Atmel
ATARFID-EK2) targeting access control applications and animal ID applications.
Third kit is the Atmel ATA6286-EK3. The evaluation kit for Atmel’s active RFID solution.
This works at 2 frequency bands: 125kHz and 433MHz.
4980H-RFID-11/15
1.
Atmel ATA2270-EK3 and Atmel ATA2270-U3
The Atmel® ATA2270-EK3 is an evaluation kit that supports a limited number of configurations in stand-alone mode. Support
during the entire development phase is provided by the PC interface and the application software. Both tools enable full
control of the tag configuration. This kit is AVR® ATmega128-based and provides all necessary source and object codes. An
API (Advanced Programming Interface) allows control of the kit by user-written software. Registered kit users have access to
an Atmel FTP server for firmware and software upgrades and also layout data in Gerber format with BOMs. For users having
the predecessor kit ATA2270-EK2 the new reader daughter board (see Figure 1-3 on page 3) in the Atmel ATA2270-EK3 kit
is available separately. The kit part number is ATA2270-U3
Figure 1-1. Atmel ATA2270-EK3 Content
2
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
Figure 1-2. Atmel ATA2270-EK3 Main Board
Figure 1-3. Atmel ATA2270-EK3 Reader Daughter Board
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
3
Figure 1-4. LCD Display with Unique Format Read Selection in Stand-alone Mode
Figure 1-5. LCD Display with Unique Format Write Selection in Stand-alone Mode
Figure 1-6. LCD Display with Animal ID Read Selection in Stand-alone Mode
4
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
Figure 1-7. LCD Display with Animal ID Write Selection in Stand-alone Mode
Figure 1-8. Atmel ATA2270-EK Graphical User Interface, Example for Atmel ATA5577
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
5
Figure 1-9. Atmel ATA2270-EK Graphical User Interface, Unique-ID Specific
Figure 1-10. Atmel ATA2270-EK Graphical User Interface, Animal ID Application Specific
6
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
2.
Atmel ATARFID-EK1 and Atmel ATARFID-EK2
The Atmel® kits ATARFID-EK1 and ATARFID-EK2 are based on a commercial reader/programmer supplied by the company
GIS. The first version in the EK1 kit operates at 125kHz. It is best suited for access control, industrial, and any kind of
consumer applications. This kit supports the very common Manchester and Biphase data coding but also FSK data coding.
The EK2 kit operates at 134.2kHz according to the animal ID standards ISO 11784 and 11785 (FDX-A and FDX-B). Both kits
allow the user to not only read the tags but also configure and program them. The readers have a USB connection and a
PC-based user interface. Sample tags complete this kit. The PC software can be downloaded from the GIS website.
Figure 2-1. Content of the Atmel ATARFID-EK1: 125kHz Kit
Figure 2-2. Content of the Atmel ATARFID-EK2: 134.2kHz Kit
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
7
Figure 2-3. GIS PC Software: Atmel ATARFID-EK1 and EK2 Main Menu
8
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
3.
Active RFID Kit ATA6286-EK3
The Atmel® ATA6286-EK3 is a complete system evaluation kit for active RFID applications. Typically these are identification
applications where a larger operating distance and/or a higher amount of data storage space is required compared to
passive RFID solutions. The difference to a passive RFID system is that the tag ASSP is supplied by a battery in the tag.
Also, the ASSP is not state-machine-based but uses an Atmel AVR® MCU core. Atmel's active RFID system uses a unique
combination of two different frequency bands: low frequency at 125kHz for the trigger and activation channel as well as for
the data downlink path, and ultra-high frequency at 434MHz for the return and uplink path.
Figure 3-1. Content of the Atmel ATA6286-EK3 Kit
Figure 3-2. Atmel ATA6286-EK3 Active Tag Front
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
9
Figure 3-3. Atmel ATA6286-EK3 Active Tag Back
Figure 3-4. Atmel ATA6286-EK3 Main Board
10
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
Figure 3-5. Atmel ATA6286-EK3 Trigger and Transmit Board
Figure 3-6. Atmel ATA6286-EK3 Receiver Board
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
11
4.
RFID Kits Overview
4.1
General Features
General
ATA2270-EK3
ATARFID-EK1
ATARFID-EK2
ATA6286-EK3
x
x
x
x
x
x
x
x
Evaluation kit
Commercial third-party device
PC-controlled
x
(1)(2)
Stand-alone
x
PC software
x
Layout data and source code
x
Serial interface (with USB converter
option)
x
x
x
x
x(3)
x
x
x
125kHz/134.2kHz(4)
125kHz
134.2kHz
125kHz + 434MHz
Data coding
Manchester/ Biphase
Manchester/
Biphase/
FSK
Manchester/
Biphase/
FSK
Manchester
LCD display
x
LED indicator
x
Keys and joystick
x
x
Buzzer
Notes: 1.
x
x
USB interface
Field frequency
4.2
x
One fixed mode
2.
Continuously checks for 125kHz unique tags or 134.2kHz animal tags and indicates them with an LED signal when
main board is switched off
3.
For status information of the reader board
4.
Exact reader frequencies are 125kHz and 133.3kHz
Kit Contents
Kit Contents
ATA2270-EK3
Main and interface board
x
Reader antenna coil
x
Compact reader
ATARFID-EK1
x
USB serial converter
x
USB cable
x
ATA6286-EK3
2x
x
Power supply 120V to 240V
ATARFID-EK2
x
2x
x
x
TX antenna coil
2x
Active tags
2x
Serial cable
x
RX antenna UHF
x
12
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
4.3
Supported RFID ASSP Devices
Supported RFID ASSP Devices
Atmel T5551/TK5551
Atmel e5530/TK5530
ATA2270-EK3
ATARFID-EK1
ATARFID-EK2
x
x
ATA6286-EK3
x
x
x(1)
Atmel T5554
Atmel T5555 – “Q5”
ATA5558
x
Atmel T5557 compatible
Atmel T5557 extended
Atmel ATA5567 compatible
x(2)
x
x(2)
Atmel ATA5567 extended
x
Atmel ATA5570
x
Atmel ATA5577
x
x
x
Atmel ATA5575M1 and
ATA5575M2
x
x (M1)
x (M2)
x(3)
Atmel ATA6286
Notes: 1. To use the Atmel T5554 select tag type T5551 in the software.
2.
This mode is only supported in the PC application software. All tag modes are programmable in this tool.
3.
LF-Trigger IC Atmel ATA5279, UHF receiver IC Atmel ATA8202.
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
13
5.
Revision History
Please note that the page numbers referred to in the following section refer to the specific revision mentioned, not to this
document.
Revision No.
History
4980H-RFID-11/15
Update for new kit ATA2270-EK3
4980G-RFID-02/15
Put document in the latest template
4980F-RFID-06/13
Complete document update
4980E-RFID-06/12
Complete document update
4980D-RFID-03/11
4980C-RFID-11/09
4980B-RFID-12/08
14
Section 1 “Description” on page 1 changed
Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3 changed
Section 1 “Description” on page 1 changed
Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3 changed
Section 1 “Description” on page 1 changed
Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3 changed
ATAN0075 [APPLICATION NOTE]
4980H–RFID–11/15
XXXXXX
Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA
T: (+1)(408) 441.0311
F: (+1)(408) 436.4200
|
www.atmel.com
© 2015 Atmel Corporation. / Rev.: 4980H–RFID–11/15
Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®, AVR®, and others are registered trademarks or trademarks of Atmel Corporation in U.S.
and other countries. Other terms and product names may be trademarks of others.
DISCLAIMER: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right
is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE
ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT
SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information
contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended,
authorized, or warranted for use as components in applications intended to support or sustain life.
SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and will not be used in connection with any applications where
the failure of such products would reasonably be expected to result in significant personal injury or death (“Safety-Critical Applications”) without an Atmel officer's specific written
consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems.
Atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by Atmel as military-grade. Atmel products are
not designed nor intended for use in automotive applications unless specifically designated by Atmel as automotive-grade.
很抱歉,暂时无法提供与“ATA2270-EK3”相匹配的价格&库存,您可以联系我们找货
免费人工找货