DSC8001DL2-PROGRAMMABLE

DSC8001 Series 1.8~3.3V Programmable Low-Power Precision CMOS Oscillator General Description Features The DSC8001 is a programmable silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages and temperatures. The device operates from 1 to 150MHz in increments of 100Hz (up to four decimal point resolution) with supply voltages between 1.8 to 3.3 Volts and extended temperatures from -40ºC to 105ºC. The DSC8001 incorporates an all silicon resonator that is extremely robust and nearly immune to stress related fractures, common to crystal based oscillators. Without sacrificing the performance and stability required of today’s systems, a crystal-less design allows for a higher level of reliability, making the DSC8001 ideal for rugged, industrial, and portable applications where stress, shock, and vibration can damage quartz crystal based systems. Available in industry standard packages, the DSC8001 can be “dropped-in” to the same PCB footprint as standard crystal oscillators.          Frequency Range: 1 to 150MHz Exceptional Stability over Temperature o ±10 PPM, ±25 PPM, ±50 PPM Operating voltage o 1.7 to 3.6V Operating Temperature Range o Ext. Industrial -40ºC to 105ºC o Industrial -40ºC to 85ºC o Ext. Commercial -20ºC to 70ºC o Commercial 0ºC to 70ºC Low Operating and Standby Current o 5mA Operating (40MHz) o 15uA Standby Ultra Miniature Footprint o 2.5 x 2.0 x 0.85 mm o 3.2 x 2.5 x 0.85 mm o 5.0 x 3.2 x 0.85 mm o 7.0 x 5.0 x 0.85 mm MIL-STD 883 Shock and Vibration Resistant Pb Free, RoHS, Reach SVHC Compliant AEC-Q100 Reliability Qualified Benefits  Block Diagram  VDD Resonator Output      Pin for pin “drop in” replacement for industry standard oscillators Semiconductor level reliability, significantly higher than quartz Frequency Resolution to 4 decimals Short mass production lead-times Longer Battery Life / Reduced Power Compact Plastic package Cost Effective VCO PFD Applications Frac-N PLL Standby# (pin1) GND       Mobile Applications Consumer Electronics Portable Electronics DVR, CCTV, Surveillance Cameras Low Profile Applications Industrial Applications All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 1 | MK-Q-B-P-D-090110-03-2 1.8~3.3V DSC8001 Series Programmable Low-Power Precision CMOS Oscillator Absolute Maximum Ratings1 Ordering Code Item Min. Max Unit Supply Voltage -0.3 +4.0 V Input Voltage -0.3 VDD+0.3 V Junction Temp - +150 °C Storage Temp -55 +150 °C Soldering Temp - +260 °C ESD - Condition DSC8001 4000 200 CDM 1500 T Family Package, Temp & Stability 40 sec max. V HBM MM - CE1 Tape/ Reel * See Ordering Information for details Recommended Operating Conditions Parameter Symbol Range Supply Voltage VDD 1.71 – 3.60V Output Load ZL R>10KΩ, C≤15pF Operating Temperature Option 1 Option 2 Option 3 Option 4 T -40 to +105 °C -40 to +85 °C -20 to +70 °C 0 to +70 °C Specifications (VDD = 1.8 to 3.3v) TA=850C unless otherwise specified Parameter Symbol Condition Min Frequency f0 Single Frequency 1 Frequency Tolerance Δf Aging Δf Supply Current, standby Typ Max Unit 150 MHz ±10,±25,±50 ppm 1 year @25°C ±5 ppm IDD T=25°C 15 uA Output Logic Levels Output logic high Output logic low VOH VOL -4mA 4mA 0.2*VDD Volts Output Startup Time2 tSU T=25°C 1.0 1.3 ms Output Disable Time tDA 20 100 ns Includes frequency variations due to initial tolerance, temperature and power supply voltage 0.8*VDD - Output Duty Cycle SYM 45 55 % Input Logic Levels Input logic high Input logic low VIH VIL 0.75*VDD - 0.25* VDD Volts All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 2 | MK-Q-B-P-D-090110-03-2 DSC8001 Series 1.8~3.3V Programmable Low-Power Precision CMOS Oscillator VDD = 1.8v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL=∞ 70MHz T=25°C 150MHz Min Typ 6.0 6.5 7.2 8.3 Max 6.3 6.9 7.5 9.1 3 3 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25°C 20%/80%*VDD 1.8 1.0 Jitter, Max Cycle to Cycle JCC F = 100MHz3 60 Unit mA ns Ps VDD = 2.5v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL=∞ 70MHz T=25°C 150MHz Min Typ 6.0 6.7 7.7 9.6 Max 6.3 7.0 8.1 10.6 2 2 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25°C 20%/80%*VDD 1.0 0.9 Jitter, Max Cycle to Cycle JCC F = 100MHz3 50 Unit mA ns ps VDD = 3.3v Parameter Supply Current, no load Output Transition time Rise Time Fall Time Jitter, Max Cycle to Cycle Symbol IDD tR tF JCC Condition 1MHz CL=0p 27MHz RL=∞ 70MHz T=25°C 150MHz CL=15pF; T=25°C 20%/80%*VDD F = 100MHz3 Min Typ 6.0 6.8 8.2 10.8 Max 6.3 7.2 8.7 12.2 1.0 0.9 50 2 2 Unit mA ns ps Notes: 1. Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated beyond these limits. 2. tSU is time to stable output frequency after VDD is applied. tSU and tEN (after EN is asserted) are identical values. 3. Measured over 50k clock cycles. All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 3 | MK-Q-B-P-D-090110-03-2 DSC8001 Series 1.8~3.3V Programmable Low-Power Precision CMOS Oscillator Nominal Performance Characteristics Supply Current Supply Current 16 Vdd = 3.65V Ta = 25°C 20 0pF 8pF 15pF Supply Current (mA) Supply Current (mA) 24 16 12 8 4 0 Vdd = 1.65V Ta = 25°C 12 15pF 8 4 50 100 Frequency (MHz) 150 0 50 100 Frequency (MHz) Rise Time 150 Fall Time 2 2 Vdd = 3.3V 1.5 -40°C 25°C 85°C Vdd = 3.3V 1.5 Fall Time (ns) Rise Time (ns) 8pF 0 0 1 0.5 -40°C 25°C 85°C 1 0.5 0 0 0 50 100 Frequency (MHz) 0 150 50 100 Frequency (MHz) 150 Fall Time Rise Time 2 2 Vdd = 1.8V -40°C 25°C 85°C Vdd = 1.8V 1.5 Fall Time (ns) 1.5 Rise Time (ns) 0pF 1 0.5 -40°C 25°C 85°C 1 0.5 0 0 0 50 100 Frequency (MHz) 150 0 50 100 Frequency (MHz) 150 All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 4 | MK-Q-B-P-D-090110-03-2 1.8~3.3V DSC8001 Series Programmable Low-Power Precision CMOS Oscillator Output Waveform tR tF 80% Output 50% 20% tEN 1/fo tDA VOH Standby# VOL Standby Function Standby# Output (pin 1) (pin 3) Hi Level Output ON Open (no connect) Output ON Low Level High Impedance Test Circuit IDD VDD 0.01uF 4 3 1 2 15pF *VSD *VSD = Standby# Logic Level Input All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 5 | MK-Q-B-P-D-090110-03-2 1.8~3.3V DSC8001 Series Programmable Low-Power Precision CMOS Oscillator Board Layout (recommended) Solder Reflow Profile 20-40 Sec MSL 1 @ 260°C refer to JSTD-020C Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max. Preheat Time 150°C to 200°C 60-180 Sec Time maintained above 217°C 60-150 Sec 255-260°C Peak Temperature Time within 5°C of actual Peak 20-40 Sec 6°C/Sec Max. Ramp-Down Rate Time 25°C to Peak Temperature 8 min Max. Se 3C / 217°C 200°C 60-150 Sec S 6C/ ec 3C / Se cM ax . Reflow 25°C 60-180 Sec x. 150°C Ma Temperature (°C) cM ax . 260°C Cool Pre heat Time 8 min max Package Dimensions 7.0 x 5.0 mm Plastic Package External Dimensions 7.0±0.10 [0.276±0.004] #4 Recommended Land Pattern* 5.08 [0.200] 5.08 [0.2] #3 #4 #3 2.6 [0.102] 2.6 [0.102] 3.5 [0.138] 0.2 [0.008] 2.2 [0.087] #1 #2 5.0±0.10 [0.197±0.004] #2 1.4 [0.055] 0.2 [0.008] #1 0.85±0.05 [0.033±0.002] o o o o o 1.4 [0.055] 0.2 [0.008] 1.4 [0.055] 1.2 [0.047] No. 1 2 3 4 o Pin Terminal Standby# GND Output VDD *Note: The center pad is not connected internally and should be left unconnected or tied to GND. units: mm [inch] All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 6 | MK-Q-B-P-D-090110-03-2 DSC8001 Series 1.8~3.3V Programmable Low-Power Precision CMOS Oscillator 5.0 x 3.2 mm Plastic Package External Dimensions 2.54 [0.100] 2.54 [0.100] 5±0.10 [0.197±0.004] #4 Recommended Land Pattern #3 #4 #3 1.2 [0.047] 2.1 [0.083] 0.2 [0.008] 1.1 [0.043] 0.1 [0.004] #2 1.2 [0.047] #1 #2 3.2±0.10 [0.126±0.004] #1 0.1 [0.004] 1.2 [0.047] 0.9 [0.035] No. 1 2 3 4 0.85±0.05 [0.033±0.002] Pin Terminal Standby# GND Output VDD units: mm [inch] 3.2 x 2.5 mm Plastic Package Recommended Land Pattern External Dimensions 3.2±0.05 [0.126±0.002] #4 2.1 [0.083] 2.1 [0.083] #3 #3 #4 0.9 [0.035] 0.9 [.035] 1.0 [0.039] CO.25 #1 #2 #2 0.9±0.05 [0.035±0.002] #1 2.5±0.05 [0.098±0.002] 0.8±0.1 [0.031±0.004] 0.85±0.05 [0.033±0.002] No .1 2 3 4 Pin Terminal Standby# GND Output VDD 0.2 [0.008] 0.9 [0.035] units: mm [inch] All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 7 | MK-Q-B-P-D-090110-03-2 DSC8001 Series 1.8~3.3V Programmable Low-Power Precision CMOS Oscillator 2.5 x 2.0 mm Plastic Package External Dimensions 2.5±0.05 [0.098±0.002] #4 Recommended Land Pattern 1.65 [0.065] 1.65 [0.065] #3 #3 #4 0.7 [0.028] 0.7 [0.028] 0.85 [0.033] CO.25 #1 #2 0.65±0.05 [0.026±0.002] #2 2.0±0.05 [0.079±0.002] #1 0.2 [0.008] 0.65 [0.026] 0.65±0.10 [0.026±0.004] No .1 2 3 4 0.85±0.05 [0.033±0.002] Ordering Information Pin Terminal Standby# GND Output VDD units: mm [inch] DSC8001 PTS - T PART NUMBERING GUIDE Package (Plastic QFN) P=A: P=B: P=C: P=D: Temperature T=C: 0o ~ +70o C T=E: -20o ~ +70o C T=I: -40o ~ +85o C T=L: -40o ~ +105o C 7.0x5.0mm 5.0x3.2mm 3.2x2.5mm 2.5x2.0mm Stability S=1: ±50ppm S=2: ±25ppm S=5: ±10ppm Packing Option Blank: Tubes T: Tape & Reel Disclaimer: Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. MICREL, Inc. Phone: +1 (408) 944-0800 ● ● 2180 Fortune Drive, Fax: +1 (408) 474-1000 San Jose, California 95131 ● Email: hbwhelp@micrel.com ● ● USA www.micrel.com All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to implied warranties of merchantability or fitness for a particular use. Page 8 | MK-Q-B-P-D-090110-03-2