DSC8004BI2-PROGRAMMABLE 数据手册
DSC8004 Series
1.8~3.3V
Programmable Low-Power Precision CMOS Oscillator
General Description
Features
The DSC8004 is a programmable silicon MEMS
based CMOS oscillator offering excellent jitter
and stability performance over a wide range of
supply voltages and temperatures. The device
operates from 1 to 150MHz in increments of
100Hz (up to four decimal point resolution) with
supply voltages between 1.8 to 3.3 Volts and
extended temperatures from -40ºC to 105ºC.
The DSC8004 has the same functionality and
performance as the DSC8001 but with greater
output drive (CL=40pf).
The DSC8004 incorporates an all silicon
resonator that is extremely robust and nearly
immune to stress related fractures, common to
crystal based oscillators. Without sacrificing the
performance and stability required of today’s
systems, a crystal-less design allows for a
higher level of reliability, making the DSC8004
ideal for rugged, industrial, and portable
applications where stress, shock, and vibration
can damage quartz crystal based systems.
Available in industry standard packages, the
DSC8004 can be “dropped-in” to the same PCB
footprint as standard crystal oscillators.
Benefits
Block Diagram
VDD
Output
Frequency Range: Programmable from
1 to 150MHz
Exceptional Stability over Temperature
o ±20 PPM , ±25 PPM, ±50 PPM
Operating voltage
o 1.71 to 3.60V
Operating Temperature Range
o Ext. Industrial -40ºC to 105ºC
o Industrial -40ºC to 85ºC
o Ext. Commercial -20ºC to 70ºC
Low Operating and Standby Current
o 8mA Operating (40MHz)
o 15uA Standby
Ultra Miniature Footprint
o 2.5 x 2.0 x 0.85 mm
o 3.2 x 2.5 x 0.85 mm
o 5.0 x 3.2 x 0.85 mm
o 7.0 x 5.0 x 0.85 mm
Excellent shock and Vibration
Resistance
Lead Free, RoHS & Reach SVHC
Compliant
Pin for pin “drop in” replacement for
industry standard oscillators
Semiconductor level reliability,
significantly higher than quartz
Frequency Resolution to 4 decimals
Short mass production lead-times
Longer Battery Life / Reduced Power
Compact Plastic package
Cost Effective
Applications
Resonator
VCO
PFD
Frac-N
PLL
Standby#
Mobile Applications
Consumer Electronics
Portable Electronics
CCD Clock for VTR Cameras
Low Profile Applications
Industrial
GND
(pin1)
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 1 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
Programmable Low-Power Precision CMOS Oscillator
1.8~3.3V
Absolute Maximum Ratings1
Ordering Code
Item
Min.
Max
Unit
Supply Voltage
-0.3
+4.0
V
Input Voltage
-0.3
VDD+0.3
V
Junction Temp
-
+150
°C
Storage Temp
-55
+150
°C
Soldering Temp
-
+260
°C
ESD
-
Condition
DSC8004
4000
200
CDM
1500
T
Family
Package, Temp
& Stability
40 sec max.
V
HBM
MM
-
CE1
Tape/
Reel
* See Ordering Information for details
Recommended Operating Conditions
Parameter
Symbol
Range
Supply Voltage
VDD
1.71 – 3.60V
Output Load
ZL
R>10KΩ, C≤40pF
T
-40 to +105 °C
-40 to +85 °C
-20 to +70 °C
Operating Temperature
Option 1
Option 2
Option 3
Specifications (VDD = 1.8 to 3.3v) TA=850C unless otherwise specified
Parameter
Symbol
Condition
Min
Max
Unit
f0
Single Frequency
1
150
MHz
Δf
Includes frequency
variations due to initial
tolerance, temperature
and power supply voltage
Frequency Tolerance
±10,±25,±50
ppm
Aging
Δf
1 year @25°C
±5
ppm
Supply Current, standby
IDD
T=25°C
15
uA
Output Startup Time2
tSU
T=25°C
1.0
1.3
ms
Output Disable Time
tDA
20
100
ns
Frequency
Typ
Output Duty Cycle
SYM
45
55
%
Input Logic Levels
Input logic high
Input logic low
VIH
VIL
0.75*VDD
-
0.25* VDD
Volts
Notes:
1.
Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be
operated beyond these limits.
2.
tSU is time to stable output frequency after VDD is applied. tSU and tEN (after EN is asserted) are identical values.
3.
Measured over 50k clock cycles.
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 2 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
1.8~3.3V
Programmable Low-Power Precision CMOS Oscillator
VDD = 1.8v
Parameter
Supply Current, no load
Output Logic Levels
Output logic high
Output logic low
Output Transition time
Rise Time
Fall Time
Output Transition time
Rise Time
Fall Time
Period Jitter
Symbol
IDD
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
VOH
VOL
-6mA
6mA
tR
tF
CL=40pF; T=25°C
20%/80%*VDD
tR
tF
Jp
Min
Typ
5.9
6.7
8.1
10.6
0.8*VDD
-
Max
6.2
7.1
8.5
11.9
Unit
mA
0.2*VDD
Volts
1.4
1.1
3
3
ns
CL=40pF; T=25°C
10%/90%*VDD
2.2
1.8
4
4
ns
F = 100MHz3
10
15
ps rms
Typ
6.1
7.2
8.9
12.2
Max
6.4
7.5
9.4
13.9
Unit
VDD = 2.5v
Parameter
Supply Current, no load
Output Logic Levels
Output logic high
Output logic low
Output Transition time
Rise Time
Fall Time
Output Transition time
Rise Time
Fall Time
Period Jitter
Symbol
IDD
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
VOH
VOL
-6mA
6mA
tR
tF
CL=40pF; T=25°C
20%/80%*VDD
tR
tF
Jp
Min
0.9*VDD
-
mA
0.1*VDD
Volts
1.0
0.9
2
2
ns
CL=40pF; T=25°C
10%/90%*VDD
1.7
1.5
3.5
3
ns
F = 100MHz3
5
10
ps rms
Typ
6.2
7.6
10.0
14.4
Max
6.5
8.0
10.5
16.6
Unit
VDD = 3.3v
Parameter
Supply Current, no load
Output Logic Levels
Output logic high
Output logic low
Output Transition time
Rise Time
Fall Time
Output Transition time
Rise Time
Fall Time
Period Jitter
Symbol
IDD
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
VOH
VOL
-8mA
8mA
tR
tF
CL=40pF; T=25°C
20%/80%*VDD
tR
tF
Jp
Min
0.9*VDD
-
mA
0.1*VDD
Volts
0.8
0.8
2
2
ns
CL=40pF; T=25°C
10%/90%*VDD
1.4
1.3
3
3
ns
F = 100MHz3
5
10
ps rms
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 3 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
1.8~3.3V
Programmable Low-Power Precision CMOS Oscillator
Output Waveform
tR
tF
80%
Output
50%
20%
tEN
1/fo
tDA
VOH
Standby#
VOL
Standby Function
Standby#
Output
(pin 1)
(pin 3)
Hi Level
Output ON
Open
(no connect)
Output ON
Low Level
High Impedance
Test Circuit
IDD
VDD
0.01uF
4
3
1
2
40pF
*VSD
*VSD = Standby# Logic Level Input
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 4 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
Programmable Low-Power Precision CMOS Oscillator
1.8~3.3V
Board Layout (recommended)
Solder Reflow Profile
20-40
Sec
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max.
Preheat Time 150°C to 200°C
60-180 Sec
Time maintained above 217°C
60-150 Sec
255-260°C
Peak Temperature
Time within 5°C of actual Peak
20-40 Sec
6°C/Sec Max.
Ramp-Down Rate
Time 25°C to Peak Temperature
8 min Max.
Se
3C
/
217°C
200°C
60-150
Sec
S
6C/
ec
3C
/
Se
cM
ax
.
Reflow
25°C
60-180
Sec
x.
150°C
Ma
Temperature (°C)
cM
ax
.
260°C
Cool
Pre heat
Time
8 min max
Package Dimensions
7.0 x 5.0 mm Plastic Package
External Dimensions
7.0±0.10 [0.276±0.004]
#4
Recommended Land Pattern*
5.08 [0.200]
5.08 [0.2]
#3
#4
#3
2.6 [0.102]
2.6 [0.102]
3.5 [0.138]
0.2 [0.008]
2.2 [0.087]
#1
#2
5.0±0.10 [0.197±0.004]
#2
1.4 [0.055]
0.2 [0.008]
#1
0.85±0.05 [0.033±0.002]
o
o
o
o
o
1.4 [0.055]
0.2 [0.008]
1.4 [0.055]
1.2 [0.047]
No.
1
2
3
4
o
Pin Terminal
Standby#
GND
Output
VDD
*Note: The center pad is not connected
internally and should be left unconnected or tied to GND.
units: mm [inch]
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 5 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
1.8~3.3V
Programmable Low-Power Precision CMOS Oscillator
5.0 x 3.2 mm Plastic Package
External Dimensions
2.54 [0.100]
2.54 [0.100]
5±0.10 [0.197±0.004]
#4
Recommended Land Pattern
#3
#4
#3
1.2 [0.047]
2.1 [0.083]
0.2 [0.008]
1.1 [0.043]
0.1 [0.004]
#2
1.2 [0.047]
#1
#2
3.2±0.10 [0.126±0.004]
#1
0.1 [0.004]
1.2 [0.047]
0.9 [0.035]
No.
1
2
3
4
0.85±0.05 [0.033±0.002]
Pin Terminal
Standby#
GND
Output
VDD
units: mm [inch]
3.2 x 2.5 mm Plastic Package
External Dimensions
3.2±0.05 [0.126±0.002]
#4
Recommended Land Pattern
2.1 [0.083]
2.1 [0.083]
#3
#3
#4
0.9 [0.035]
0.9 [.035]
1.0 [0.039]
CO.25
#1
#2
#2
0.9±0.05 [0.035±0.002]
#1
2.5±0.05 [0.098±0.002]
0.8±0.1 [0.031±0.004]
0.85±0.05 [0.033±0.002]
No
.1
2
3
4
Pin Terminal
Standby#
GND
Output
VDD
0.2 [0.008]
0.9 [0.035]
units: mm [inch]
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 6 |
MK-Q-B-P-D-090110-02-1
DSC8004 Series
Programmable Low-Power Precision CMOS Oscillator
1.8~3.3V
2.5 x 2.0 mm Plastic Package
External Dimensions
2.5±0.05 [0.098±0.002]
#4
Recommended Land Pattern
1.65 [0.065]
1.65 [0.065]
#3
#3
#4
0.7 [0.028]
0.7 [0.028]
0.85 [0.033]
CO.25
#1
#2
0.65±0.05 [0.026±0.002]
#2
2.0±0.05 [0.079±0.002]
#1
0.2 [0.008]
0.65 [0.026]
0.65±0.10 [0.026±0.004]
No
.1
2
3
4
0.85±0.05 [0.033±0.002]
Pin Terminal
Standby#
GND
Output
VDD
units: mm [inch]
Ordering Information
DSC8004 PTS - T
PART NUMBERING GUIDE
Package
(Plastic QFN)
P=A:
P=B:
P=C:
P=D:
Temperature
7.0x5.0mm
5.0x3.2mm
3.2x2.5mm
2.5x2.0mm
T=E: -20o ~ +70o C
T=I: -40o ~ +85o C
T=L: -40o ~ +105o C
Stability
S=1: ±50ppm
S=2: ±25ppm
S=3: ±20ppm
Packing Option
Blank: Tubes
T: Tape & Reel
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a
warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No
license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel’s terms and
conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel
products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
MICREL, Inc.
Phone: +1 (408) 944-0800
●
●
2180 Fortune Drive,
Fax: +1 (408) 474-1000
San Jose, California
95131
● Email: hbwhelp@micrel.com
●
●
USA
www.micrel.com
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 7 |
MK-Q-B-P-D-090110-02-1