1394b Dongles for Long-Distance Over Coaxial Cable
Extend 1394b Links up to 60m with Power Over Cable
Summary
Microchip’s EQCO-FW7501 and EQCO-FW5001 are two
extender solutions for the FireWire® serial bus, operating
over 75Ω and 50Ω coaxial cables respectively.
Each unit contains a 1394b transceiver (EQCO875SC-HS
or EQCO850SC-HS) that support full-duplex FireWire 800
(S800) data transfer rates (1.0 Gbit/s) over a single coax
cable. The transceiver includes an adaptive equalizer that
supports a cable length of up to 60m.
In addition to this long-distance, full-duplex data
transmission, these devices allow power to be transmitted
simultaneously from the host side to a target—such as
camera or hard drive—over the coax cable.
The Microchip coaxial extenders fully support
IEEE 1394b standards.
Implementation
Our 1394b Over Coax dongles make it easy to implement
long-distance FireWire-based applications. By taking
advantage of coaxial cable’s secure shielding, our
1394b dongles can even be used in electrically noisy
enviornments such as factories.
The EQCO-FW7501 supports up to 60 meters of 75Ω
coaxial cable; the EQCO-FW5001 supports up to 30m of
50Ω coaxial cable. In both cases, they operate at a datarate of up to 1.0 Gbit/s (S800).
The dongles give users the flexibility to determine the
best cable lengths for their applications. The transceiver
contains an equalizer that is fully adaptive that adjusts to
a variety of cable lengths as well as age and environmental
conditions like temperature, without any need for
programming. The dongles have a standard 1394b 9-pin
connector on one end and a 75Ω BNC or 50Ω SMA
connector on the opposite end.
These dongles are ideal for laboratory and industrial
applications, such as machine vision and factory
automation, where robust cabling is required. They can
also be used with high-flex, small-diameter coaxial cable
with rotating joints, if necessary, for applications where
multiple rotations are required.
Technical Specifications
IEEE 1394b Interface
Connector
Coax Interface/Cable
EQCO-FW5001: 50Ω
EQCO-FW7501: 75Ω
Power Over Cable
Max. Voltage
Max. Current
Max. Transmitted Power
Power Supply to Remote Device
Voltage Available
Environmental
Operating Temperature
Relative Humidity
Storage Temperature
9-Pin 1394b
50Ω rated SMA
75Ω rated BNC
32V (1394b Bus voltage)
1.0A (limited by coax dongle linear power supply)
32W (before cable losses)
Vin (bus voltage) −1V-Coax DC drop (varies with cable type/length)
0°C to +50°C
Up to 85% non-condensing
−20°C to +70°C
Performance Specifications
Performance by Product and Cable Type
(All cable information at S800/1.0 Gbit/s data-rate)
RG174
RTK
RG58
RG179
RG59
RG6
50Ω/2.8 mm dia
50Ω/2.8 mm dia
50Ω/5 mm dia
75Ω
75Ω
75Ω/5 mm
EQCO-FW7501 (75Ω)
EQCO-FW5001 (50Ω)
–
–
–
20 meters/65 feet
40 meters/130 feet
60 meters/195 feet
15 meters/49 feet
25 meters/81 feet
30 meters/67.5 feet
–
–
–
www.microchip.com
Visit our web site for additional product information and to locate your local sales office.
Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199
Information subject to change. The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks
mentioned herein are property of their respective companies. © 2014, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 2/14
DS00001674A
很抱歉,暂时无法提供与“EQCO-FW5001”相匹配的价格&库存,您可以联系我们找货
免费人工找货