MADA3KP16A

MDA3KP6.0A to MDA3KP40A Available Surface Mount 3000 W Vertical Transient Voltage Suppressor Array High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION The MDA series of 3000 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4 Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • Available in both unidirectional and bidirectional construction Selections for 6.0 to 40 volts standoff voltages (VWM) Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer Micronote 129 for more details on the screening options. • High reliability with wafer fabrication and assembly lot traceability • All parts surge tested • Suppresses transients up to 3,000 W @ 10/1000 μs (see Figure 1) • • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B 3σ lot norm screening performed on standby current (ID) MDA3KPxxA MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 APPLICATIONS / BENEFITS • • • • • • • • • • • • Suppresses transients up to 3000 watts @ 10/1000 µs Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1 – 4: MDA3KP6.0A to MDA3KP40A Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 – 3: MDA3KP6.0A to MDA3KP40A Class 4: : MDA3KP6.0CA to MDA3KP18A Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: MDA3KP6.0A to MDA3KP40A Class 3: MDA3KP6.0A to MDA3KP18A Class 4: MDA3KP6.0A to MDA3KP9.0A *See Figure 3 for further temperature derating selection. RF01243, Rev B ©2019 Microsemi Corporation MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 7 MDA3KP6.0A to MDA3KP40A MAXIMUM RATINGS @ 25 oC unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature Symbol TJ and TSTG PPP Peak Pulse Power @ 10/1000 s (1) Unidirectional Bidirectional tclamping (0 volts to V(BR) min) Forward Clamping Voltage @ 500 Amps (2) Forward Surge Current (2) Solder Temperature @ 10 s VFS IFSM TSP Value -55 to +150 3,000