SMAJ4752CE3/TR13

SMAJ4728A THRU SMAJ4764A 8700 E. Thomas Road Scottsdale, AZ 85252 Phone: (480) 941-6300 Fax: (480) 947-1503 Features • • • • • • SILICON 2 WATT ZENER DIODES For surface mount applications (flat handling surface for accurate placement) 3.3 thru 100 Volt Voltage Range High Surge Current Rating Higher Voltages Available Electrically Equivalent to JEDEC Registered 1N4728A thru 1N4764A Available on Tape and Reel. DO-214AC (SMAJ) H Mechanical Data • • • • • J Package similar to JEDEC DO-214AC (see dimension ‘A’ note) Terminals solderable per MIL-STD-750, Method 2026 Polarity is indicated by cathode band. o Maximum temperature for soldering: 260 C for 10 seconds. For surface mount applications with flame retardent epoxy meeting UL94V-0 A E C D B F G Maximum Ratings @ 25°°C Unless Otherwise Specified Maximum Forward Voltage Peak Surge Current Steady State Power Dissipation Operating And Storage Temperatures Thermal Resistance VF 1.2V Is See Table 1 P(AV) 2.0W TJ ,TSTG -55°C to +150°C 25oC/W RθJL (Note: 1) (Note: 2,3) NOTES: 1. Forward Current @ 200mA. 2 2. Mounted on 4.0mm copper pads to each terminal. 3. Lead temperature at 100 °C or less. Derate linearly above 100 °C to zero power at 150°C. DIMENSIONS DIM A B C D E F G H J INCHES MIN .078 .052 ----.030 .055 .194 .160 .100 MAX .115 .058 .005 .02 .060 .075 .216 .180 .110 MM MIN 1.98 1.32 ----.76 1.65 4.93 3.99 2.57 MAX 2.92 1.47 .127 .51 1.52 2.13 5.48 4.50 2.79 NOTE 1: THIS MAXIMUM DIMENSION IS LARGER THAN THE STANDARD JEDEC CALL OUT. STANDARD JEDEC IS .105 INCHES OR 2.66 MM. PAD LAYOUT 0.095” 0.078 0.075 Data Sheet#MSC0284A.PDF Date: 05/01/97 NOTE 1 SMAJ4728A thru SMAJ4764A Electrical Characteristics @ 25°°C Unless Otherwise Specified PART NUMBER ZENER VOLTAGE ( V Z) TEST CURRENT ( I Z T) (NOTE 4) MAXIMUM DYNAMIC IMPEDANCE (Z Z T @ I Z T ) MAXIMUM REVERSE CURRENT (IR @ VR) TEST VOLTAGE (VR) MAXIMUM REGULATOR CURRENT ( I Z M) o TL = 100 C MAXIMUM KNEE IMPEDANCE (Z Z K @ I Z K ) µA 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VOLTS 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 MA 552 504 468 434 386 356 324 292 266 242 220 200 182 166 152 138 132 114 100 90 82 76 68 60 54 50 46 44 38 36 32 28 26 24 22 20 18 OHMS 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 720 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 (NOTE 2) SMAJ4728A SMAJ4729A SMAJ4730A SMAJ4731A SMAJ4732A SMAJ4733A SMAJ4734A SMAJ4735A SMAJ4736A SMAJ4737A SMAJ4738A SMAJ4739A SMAJ4740A SMAJ4741A SMAJ4742A SMAJ4743A SMAJ4744A SMAJ4745A SMAJ4746A SMAJ4747A SMAJ4748A SMAJ4749A SMAJ4750A SMAJ4751A SMAJ4752A SMAJ4753A SMAJ4754A SMAJ4755A SMAJ4756A SMAJ4757A SMAJ4758A SMAJ4759A SMAJ4760A SMAJ4761A SMAJ4762A SMAJ4763A SMAJ4764A VOLTS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 mA 76 69 64 58 53 49 45 41 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 OHMS 10 10 9 9 8 7 5 2 3.5 4.0 4.5 5.0 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 350 TEST CURRENT ( I Z K) (NOTE 2) MAXIMUM (SURGE) CURRENT (IS) (NOTE 3) mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 mA 1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 45 NOTE: 1. The type numbers shown have a 5% tolerance on nominal zener voltage. No suffix signifies a 10% tolerance, C signifies 2%, and D signifies 1% tolerance. 2. The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc Zener current (I ZT or IZK) is superimposed on I ZT. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and eliminate unstable units. o 3. The reverse surge current is measured at 25 C ambient using a ½ square wave or equivalent sine wave pulse 1/120 second duration superimposed on IZT. 4. Voltage at thermal equilibrium or 90 seconds after application of dc current.