SY100S324JI

NOT RECOMMENDED FOR NEW DESIGNS LOW POWER HEX TTL-to-ECL TRANSLATOR Micrel, Inc. DESCRIPTION FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SY100S324 SY100S324 Max. propagation delay of 1.4ns IEE min. of –70mA Industry standard 100K ECL levels Extended supply voltage option: VEE = –4.2V to –5.5V Differential outputs Voltage and temperature compensation for improved noise immunity Internal 75kΩ input pull-down resistors Twice as fast as Fairchild’s 324 Function and pinout compatible with Fairchild F100K Available in 28-pin PLCC package The SY100S324 is a hex translator designed to convert TTL logic levels to 100K ECL levels. The inputs are TTL compatible with differential outputs that can either be used as an inverting/non-inverting translator or as differential line drivers. A common Enable (E), when LOW, holds all inverting outputs HIGH and holds all noninverting outputs LOW. When used in the differential mode, due to its high common mode rejection, it overcomes voltage gradients between the TTL and ECL ground systems. The VEE and VTTL power may be applied in either order. BLOCK DIAGRAM PIN NAMES E Pin Function Q0 Q0 D0–D5 D0 E Enable Inputs Q0–Q5 Data Outputs D1 Q1 Q1 Q0–Q5 Complementary Data Outputs D2 Q2 Q2 VEES VEE Substrate VTTL TTL VCC Power Supply D3 Q3 Q3 VCCA VCCO for ECL Outputs D4 Q4 Q4 D5 Q5 Q5 M9999-042307 hbwhelp@micrel.com or (408) 955-1690 Data Inputs Rev.: I 1 Amendment: /0 Issue Date: April 2007 Micrel, Inc. SY100S324 PACKAGE/ORDERING INFORMATION Q1 Q1 Q0 VEES Q0 D2 D1 Ordering Information 25 24 23 22 21 20 19 Q2 26 18 D0 Q2 27 17 VTTL VCC 28 16 VCC 1 E VEES VCCA VCCA 2 Q3 4 Top View PLCC J28-1 15 3 7 8 9 12 D4 Package Type Operating Range Package Marking Lead Finish SY100S324JC J28-1 Commercial SY100S324JC Sn-Pb SY100S324JCTR(1) J28-1 Commercial SY100S324JC Sn-Pb SY100S324JY(2) J28-1 Industrial SY100S324JY with Pb-Free bar-line indicator Matte-Tin SY100S324JYTR(1, 2) J28-1 Industrial SY100S324JY with Pb-Free bar-line indicator Matte-Tin 10 11 VEES Q5 Q5 D5 6 Q4 Q4 Q3 5 13 VEE D3 14 Part Number Notes: 1. Tape and Reel. 2. Pb-Free package is recommended for new designs. 28-Pin PLCC (J28-1) M9999-042307 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY100S324 DC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND, VTTL = +4.5V to +5.5V Symbol Parameter Min. Sim. Max. Unit Condition VOH Output HIGH Voltage –1025 –986 –880 mV VIN = VIH (Max.) VOL Output LOW Voltage –1810 –1674 –1620 mV VIN = VIL (Min.) Loading with 50Ω VOHC Output HIGH Voltage –1035 — — mV VIN = VIH (Min.) VOLC Output LOW Voltage — — –1610 mV VIN = VIL (Max.) VIH Input HIGH Voltage 2.0 — 5.0 V Guaranteed HIGH Signal for All Inputs VIL Input LOW Voltage 0 — 0.8 V Guaranteed LOW Signal for All Inputs VCD Input Clamp Diode Voltage — — –1.5 V IIN = –10mA IIH Input HIGH Current Data Enable — — — — 20 120 µA VIN = +2.4V All Other Inputs VIN = GND — — 1.0 mA VIN = +5.5V, VTTL = Max., All Other Inputs VIN = GND Loading with 50Ω to –2V IIH Input HIGH Current Breakdown Test, All Inputs IIL Input LOW Current Data Enable –1.2 –6.7 — — — — mA VIN = +0.4V All Other Inputs VIN = VIH IEE VEE Power Supply Current –70 –45 –28 mA All Inputs VIN = +4.0V ITTL VTTL Power Supply Current — 25 35 mA All Inputs VIN = GND AC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND, VTTL = +4.5V to +5.5V Symbol Parameter Min. Typ. Max. Unit tPLH tPHL Propagation Delay Data and Enable to Output 400 850 1400 ps tTLH tTHL Transition Time 20% to 80%, 80% to 20% 350 — 1700 ps M9999-042307 hbwhelp@micrel.com or (408) 955-1690 3 Condition See Switching Wave Form Figures Micrel, Inc. SY100S324 SWITCHING WAVEFORM 2.5 ± 0.3 ns 2.5 ± 0.3 ns +3.0V 80% 50% INPUT +1.5V 20% 0V tPHL tPLH COMPLEMENT 50% tPLH tPHL 80% 50% 20% TRUE tTLH tTHL Figure 1. Propagation Delay and Transition Times Note: VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND, VTTL = +4.5V to +5.5V TEST CIRCUIT VIH VTTL 0.1µF 0.1µF L1 0.1µF L2 SCOPE CHAN A SCOPE CHAN B RT RT L3 PULSE GENERATOR 0.1µF 2.5µF VEE VCC Figure 2. AC Test Circuit Notes: VCC, VCCA = +2V, VEE = –2.5V, VTTL = +7.0V, VIH = +6.0V L1, L2 and L3 = equal length 50Ω impedance lines RT = 50Ω terminator internal to scope Decoupling 0.1µF from GND to VCC, VEE and VTTL All unused outputs are loaded with 50Ω to GND CL = Fixture and stray capacitance ≤ 3pF M9999-042307 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. SY100S324 28-PIN PLCC (J28-1) Rev. A MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-042307 hbwhelp@micrel.com or (408) 955-1690 5