HMC522LC4
v03.0514
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
GaAs MMIC I/Q MIXER
11 - 16 GHz
Typical Applications
Features
The HMC522LC4 is ideal for:
Wide IF Bandwidth: DC - 3.5 GHz
• Point-to-Point and Point-to-Multi-Point Radio
Image Rejection: 35 dB
• Digital Radio
LO to RF Isolation: 45 dB
• VSAT
High Input IP3: +24 dBm
24 Lead 4x4mm SMT Package: 16mm²
Functional Diagram
General Description
The HMC522LC4 is a compact I/Q MMIC mixer in a
leadless “Pb free” SMT package, which can be used
as either an Image Reject Mixer or a Single Sideband
Upconverter. The mixer utilizes two standard Hittite
double balanced mixer cells and a 90 degree hybrid
fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100
MHz USB IF output. This product is a much smaller
alternative to hybrid style Image Reject Mixers and
Single Sideband Upconverter assemblies. The
HMC522LC4 eliminates the need for wire bonding
allowing use of surface mount manufacturing
techniques.
Electrical Specifications, TA = +25 °C, IF= 100 MHz, LO = +15 dBm*
Parameter
Min.
Frequency Range, RF/LO
Frequency Range, IF
Max.
Min.
7.5
17
1 dB Compression (Input)
25
Typ.
Max.
12.7 - 15.4
DC - 3.5
Conversion Loss (As IRM)
Image Rejection
Typ.
11 - 16
GHz
DC - 3.5
10
7.5
20
+14
Units
GHz
9.5
dB
30
dB
+14
dBm
LO to RF Isolation
40
45
40
50
dB
LO to IF Isolation
18
22
18
22
dB
dBm
IP3 (Input)
+22
+24
Amplitude Balance
0.4
0.2
dB
4
3
Deg
Phase Balance
* Unless otherwise noted, all measurements performed as downconverter.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
Data Taken As IRM With External IF Hybrid
Image Rejection vs. Temperature
50
IMAGE REJECTION (dB)
CONVERSION GAIN (dB)
0
-5
-10
+25C
+85C
-40C
-15
40
30
20
+25C
+85C
-55C
10
0
-20
10
11
12
13
14
15
16
10
17
11
12
13
14
15
16
17
16
17
16
17
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss
0
0
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
RF
LO
-10
+13 dBm
+15 dBm
+17 dBm
+19 dBm
-15
-20
-5
-10
-15
-20
10
11
12
13
14
15
16
17
10
11
12
RF FREQUENCY (GHz)
13
14
15
FREQUENCY (GHz)
Input P1dB vs. Temperature
Input IP3 vs. LO Drive
30
20
18
25
16
14
IP3 (dBm)
P1dB (dBm)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Conversion Gain vs. Temperature
12
10
+25C
+85C
-40C
8
20
15
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +19 dBm
10
6
4
5
10
11
12
13
14
15
RF FREQUENCY (GHz)
16
17
10
11
12
13
14
15
RF FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
Quadrature Channel Data Taken Without IF Hybrid
IF Bandwidth*
0
-10
-5
LO/IF2
-30
RESPONSE (dB)
ISOLATION (dB)
-20
LO/IF1
RF/IF1
-40
RF/IF2
-50
10
11
12
13
14
15
16
-10
-15
RETURN LOSS
CONVERSION GAIN
-20
LO/RF
-25
0.5
-60
17
1
1.5
Amplitude Balance vs. LO Drive
2.5
3
3.5
Phase Balance vs. LO Drive
15
2
1.5
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +19 dBm
1
PHASE BALANCE (degrees)
AMPLITUDE BALANCE (dB)
2
IF FREQUENCY (GHz)
RF FREQUENCY (GHz)
0.5
0
-0.5
-1
-1.5
-2
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +19 dBm
10
5
0
-5
-10
10
11
12
13
14
15
16
10
17
11
12
RF FREQUENCY (GHz)
13
14
15
16
17
RF FREQUENCY (GHz)
Upconverter Performance Conversion
Gain vs. LO Drive
Upconverter Performance Sideband
Rejection vs. LO Drive
0
SIDEBAND REJECTION (dBc)
0
CONVERSION GAIN (dB)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Isolations
-5
-10
LO = +13dBm
LO = +15dBm
LO = +17dBm
LO = +19dBm
-15
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +19 dBm
-10
-20
-30
-40
-50
-20
10
11
12
13
14
15
16
RF FREQUENCY (GHz)
17
10
11
12
13
14
15
16
17
RF FREQUENCY (GHz)
* Conversion gain data taken with external IF hybrid
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
Harmonics of LO
nLO Spur at RF Port
nLO
1
2
3
4
10.5
43
46
52
80
11.5
48
49
61
76
12.5
48
51
63
61
13.5
44
60
67
14.5
44
58
82
15.5
43
51
75
xx
LO = + 15 dBm
Values in dBc below input LO level measured at RF Port.
mRF
0
1
2
3
4
0
xx
-4
18
18
xx
1
27
0
54
57
64
2
83
69
70
77
91
xx
3
85
93
93
81
93
xx
4
xx
86
93
92
93
RF = 13.6 GHz @ -10 dBm
LO = 13.5 GHz @ +15 dBm
Data taken without IF hybrid
All values in dBc below IF power level
Absolute Maximum Ratings
RF / IF Input
+20 dBm
LO Drive
+ 27 dBm
Channel Temperature
150°C
Continuous Pdiss (T=85°C)
(derate 6.9 mW/°C above 85°C)
452 mW
Thermal Resistance (RTH)
(junction to package bottom)
150 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
LO Freq. (GHz)
MxN Spurious Outputs
4
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Outline Drawing
NOTES:
1.. PACKAGE BODY MATERIAL: ALUMINA
2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3.. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
Package Information
Part Number
Package Body Material
Lead Finish
HMC522LC4
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H522
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
Pin Descriptions
Function
Description
1, 2, 6 - 8, 10,
13, 17 - 24
N/C
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
3, 5, 12, 14, 16
GND
These pins and package bottom must
be connected to RF/DC ground.
4
RF
This pin is AC coupled and matched to
50 Ohms from 11 to 16 GHz.
9
IF1
11
IF2
15
LO
Interface Schematic
This pin is DC coupled. For applications
not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
source/sink more than 3mA of current or part non-function and possible part failure will result.
This pin is AC coupled and matched to
50 Ohms from 11 to 16 GHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Pin Number
6
HMC522LC4
v03.0514
GaAs MMIC I/Q MIXER
11 - 16 GHz
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 109998 [1]
Item
Description
J1, J2
PCB Mount K RF Connector, SRI
J3 - J4
PCB Mount SMA Connector, Johnson
U1
HMC552LC4
PCB [2]
109996 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC522LC4
v03.0514
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
GaAs MMIC I/Q MIXER
11 - 16 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
工商网监
湘ICP备2023018690号
