0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
130371-HMC778LP6CE

130371-HMC778LP6CE

  • 厂商:

    AD(亚德诺)

  • 封装:

    -

  • 描述:

    HMC778LP6CE - Timing, PLL Evaluation Board

  • 数据手册
  • 价格&库存
130371-HMC778LP6CE 数据手册
HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz PLLs with Integrated VCO - SMT Features • RF Bandwidth: 9.6 GHz to 10.8 GHz • 24-bit Step Size, Resolution 3 Hz typ • Fractional or Integer Modes • 350 MHz, 14-bit reference path input • Ultra Low Phase Noise 10.2 GHz; 50 MHz Ref. -106 / -102 dBc/Hz @ 10 kHz (Int / frac) -140 dBc/Hz @ 1 MHZ (Open Loop) • Frequency And Phase Modulation • Figure of Merit (FOM) -230 / -227 dBc/Hz (int / Frac) • Integrated Frequency Sweeper • Triggered Frequency Hopping • External Triggering • 40 Lead 6 x 6 mm SMT Package: 36 mm² Typical Applications • VSAT Radio • Military End-Use • Microwave Point-To-Point Radios • Phased Array Applications • Test Equipment & Industrial Control • FMCW Radar Systems Functional Diagram [1] Please refer to the pin description table for details 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz The HMC778LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) Frequency Synthesizer with an integrated Voltage Controlled Oscillator (VCO). The input reference frequency range is DC to 350 MHz while the advanced delta-sigma modulator design in the fractional synthesizer allows both ultra-fine step sizes and very low spurious products. The highly integrated structure provides excellent phase noise performance over temperature, shock and process. In addition, the HMC778LP6CE offers frequency sweep and modulation features, external triggering, double-buffering, exact frequency control, phase modulation and more. The HMC778LP6CE is packaged in a leadless QFN 6 x 6 mm surface mount package. For theory of operation and register map refer to the “PLLs w/ Integrated VCO - Microwave VCOs” Operating Guide. To view the Operating Guide, please visit www.hittite.com and choose HMC778LP6CE from the “Search by Part Number” pull down menu. Electrical Specifications, TA = +25° C; VCCVCO, VDDLS, VPPCPA = +5V; RVDD, AVDD, VCCPS, VCCHF, VDDPD, DVDD, VDDIO = + 3.3V Parameter Condition Min. Typ. Max. 9.6 10.2 10.8 Units RF Output Characteristics VCO Output Frequency Range VCO Output Power [1] 9 VCO Tuning Voltage VCO Tuning Sensitivity Frequency Pulling Frequency Pushing 2 V TUNE = 6V into a 2:1 VSWR V TUNE = 5V GHz dBm 13 V 165 MHz/V 5 MHz pp 30 MHz/V Frequency Drift Rate 1.2 MHz/ °C Sub Harmonic (1/2) 33 dBc Harmonic (2nd) 25 dBc Harmonic (3rd) VCO SSB Phase Noise @ 100 kHz Offset (Open Loop) Synthesizer In-Band SSB Phase Noise @ 10 kHz Offset (Integer / Fractional) 35 dBc V TUNE = +5V Fvco = 10 GHz -110 dBc/Hz Fref = 50 MHz Fvco = 10.2 GHz Loop BW = 100 kHz -106/-102 dBc/Hz -230 / -227 dBc/Hz Synthesizer Noise Floor, Figure Of Merit (Integer / Fractional) Synthesizer Fractional Spurs [2] Synthesizer Frequency Settling Time (100 MHz Step) -65 10.2 GHz to 10.3 GHz Loop BW = 100 kHz, 10° -45 195 PLLs with Integrated VCO - SMT General Description dBc μs RF/2 Divider Range > 4GHz Integer Mode 16 bit, even values only 32 131,070 < 4GHz Integer Mode 16 bit, all values 16 65,535 > 4GHz Fractional Mode 16 bit 40 131,065 < 4GHz Fractional Mode 16 bit 20 65,531 1] See power output vs.tuning voltage graph for power slope. [2] Actual spur level is dependent on loop parameters and will increase at division ratios closest to integer boundaries. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz PLLs with Integrated VCO - SMT Electrical Specifications (Continued) Parameter Condition Min. Typ. Max. Units DC 50 350 MHz REF Input Characteristics Frequency Range (3.3V) Power From 50Ω Source With off chip 100Ω termination Return Loss Ref Divider Range (14-Bit) 6 dBm -16 -8 1 16,383 dBm Phase Detector Rate Integer Mode DC 50 115 MHz Fractional Mode A DC 50 80 MHz Fractional Mode B DC 50 100 MHz 2.5 mA 3.5 6 mA 47 54 %VDDIO Charge Pump CP Output Current 20µA steps CP_gain = CP_current ÷ 2∏ (amps/rad) CP HiK see “Charge Pump Gain” section of “Operation Guide” 0.02 Logic Inputs Switching Threshold (Vsw) VIH/VIL within 50mV of Vsw 38 Logic Outputs VOH Output High Voltage VDDIO VOL Output Low Voltage 0 V V Output Impedance: Pull Up VDDIO = 3.3V 115 150 180 Output Impedance: Pull Dn VDDIO = 3.3V 130 135 210 Ω 1.5 mA DC Load Digital Output Driver Delay SCK to Digital Output Delay 0.5ns + 0.2ns/pF 8.2ns + 0.2ns/pF 1.7 ns with a 3 pF load Ω ns Power Supply Voltages VCCVCO - VCO Supply 4.75 5.0 5.25 V 3.5 V RVDD, AVDD, VCCPS, VCCHF, VDDPD - Analog Supply all must be equal 2.7 3.3 DVDD, VDDIO - Digital Supply both must be equal 2.7 3.3 3.5 V VDDLS, VPPCPA - Charge pump both must be equal 4.7 5.0 5.2 V Power Supply Currents 5.0V - VCO Current Consumption 3.3V - PLL Current Consumption 5.0V - Charge Pump Current Consumption Power Down Current Bias Reference Voltage (Pin 20) 3 230 265 290 mA all modes 34 54 95 mA all modes 3 7 except VCO Measured with 10 GΩ meter 1.88 1.92 16 mA 100 µA 1.96 V Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz -70 -80 -80 -90 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) -70 -100 -110 -120 -130 -140 -150 9.6 GHz 10.2 GHz 10.8 GHz -160 -170 2 10 10 3 10 -90 -100 -110 -120 -130 -140 + 25C + 85C - 40C -150 -160 4 10 5 10 6 10 -170 2 10 7 10 3 OFFSET FREQUENCY (Hz) -70 -70 -80 -80 -90 -100 -110 -120 -130 -140 -150 -160 3 10 4 10 10 5 10 6 10 7 -90 -100 -110 -120 -130 -140 -150 Fref = 10MHz, Loop BW = 10kHz Fref = 50MHz, Loop BW = 100kHz -160 10 4 SSB Phase Noise vs. Reference Freq. & Loop BW @ 10.20 GHz, Integer Mode PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) SSB Phase Noise Fractional Spurs @ 10.21 GHz, Fref = 10 MHz, Loop BW = 10 kHz -170 2 10 10 OFFSET FREQUENCY (Hz) 5 10 6 10 -170 2 10 7 PLLs with Integrated VCO - SMT SSB Phase Noise vs. Temperature @ 10.20 GHz, Integer Mode, Fref = 50 MHz, Loop BW = 100 kHz SSB Phase Noise vs. Frequency, Integer Mode, Fref = 50 MHz, Loop BW = 100 kHz 10 OFFSET FREQUENCY (Hz) 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) Reference Input Sensitivity, Sinusoid Wave, 50Ω Reference Input Sensitivity, Square Wave, 50Ω -215 -200 50 MHz -205 14 MHz sq 25 MHz sq 50 MHz sq 100 MHz sq 25 MHz FLOOR FOM (dBc/Hz) FLOOR FOM (dBc/Hz) -220 -225 14 MHz -230 -210 25 MHz -215 14 MHz -220 50 MHz -225 -230 100 MHz 100 MHz -235 -15 -235 -10 -5 0 REFERENCE POWER (dBm) 5 10 -20 -15 -10 -5 0 5 REFERENCE POWER (dBm) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz 11.5 11.5 11 11 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T = 25°C 10.5 10 9.5 9 8.5 +25C +85C -40C 8 7.5 10.5 10 9.5 9 8.5 Vcc= 4.75V Vcc= 5.00V Vcc= 5.25V 8 7.5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 TUNING VOLTAGE (Vdc) 6 7 8 9 10 11 12 13 16 14 OUTPUT POWER (dBm) 600 +25C +85C -40C 500 400 300 200 100 12 10 8 6 4 + 25C + 85C - 40C 2 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc) Open Loop VCO SSB Phase Noise, Vtune = +5V Open Loop VCO SSB Phase Noise vs. Tuning Voltage -70 0 -80 SSB PHASE NOISE (dBc/Hz) SSB PHASE NOISE (dBc/Hz) 5 Output Power vs. Tuning Voltage, Vcc = +5V 700 0 -90 10khz OFFSET 100khz OFFSET -100 -110 -120 -20 -40 +25C +85C -40C -60 -80 -100 -120 -140 -160 -130 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (Vdc 5 4 TUNING VOLTAGE (Vdc) Sensitivity vs. Tuning Voltage, Vcc = +5V SENSITIVITY (MHz/Volt) PLLs with Integrated VCO - SMT Frequency vs. Tuning Voltage, Vcc = +5V 10 11 12 13 -180 2 10 3 10 4 5 10 10 OFFSET FREQUENCY (Hz) 6 10 7 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz VCCVCO1, VCCVCO2 +5.5V Vtune 0 to +15V RVDD, AVDD, VCCPS, VCCHF, VDDPD -0.3V to +3.6V DVDD, VDDIO -0.3V to +3.6V VDDLS, VPPCPA -0.3V to +5.5V Digital Load 1 KΩ min. Digital Input 1.4V to 1.7V min. rise time 20 ns Digital Input Voltage Range -0.25V to VDDIO + 0.5V Storage Temperature Range -65° C to +125° C ESD Sensitivity (HBM) Class 1A Reliability Information Junction Temperature To Maintain 1 Million Hours MTTF 135 °C Nominal Junction Temperature (T = +85°C) 123°C Thermal Resistance (Junction to GND Paddle, 5V Supply) 24.7 °C/W Operating Temperature -40 to +85°C Outline Drawing PLLs with Integrated VCO - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05 mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [1] HMC778LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 H778 XXXX [1] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz Pin Descriptions PLLs with Integrated VCO - SMT Pin Number Function Description 1, 9 - 14, 22, 23, 26, 35 N/C No connection. These pins may be connected to RF/DC ground. Performance will not be affected. 2 - 5, 37, 39 GND [1] Pins must be connected to RF/DC ground 7 GND This pin and package bottom must be connected to RF/DC ground 6 VTUNE Control voltage input. Modulation port bandwidth dependent on drive source impedance. 8 VCCVCO2 + 5V power supply for VCO. 15 VCCHF Analog power supply for RF buffer. Nominal + 3.3V, 6 mA max. 16 VDDLS Power supply for PFD to CP level shifters. Nominal + 5V, 5 mA max., Fpd dependent. 17 VPPCPA Power Supply for the charge pump. Nominal + 5V, 10 mA Max. 18 CP Charge pump output 19 AVDD Power Supply for analog bias generation. Nominal + 3.3V, 2 mA Max. 20 BIAS [2] External bypass decoupling for precision bias circuits, 1.920V ±2 mV is generated internally 21 RVDD Power Supply for Reference Path. Nominal + 3.3V, 15 mA Max., reference dependent 24 XREFP Reference input. DC bias is generated internally. Normally AC coupled externally. 25 VDDPD Power supply for phase detector. Nominal + 3.3V. Decoupling for this supply is critical. 5 mA max., Fpd dependent. 27 CEN CMOS input, hardware chip enable. 28 SEN CMOS input, serial port latch enable. 29 SCK CMOS input, serial port clock. 30 SDI CMOS input, serial port data. 31 DVDD Power supply for digital. Nominal + 3.3V, 25 mA max., Fpd dependent. 32 VDDIO Power supply for digital I/O. Nominal + 3.3V, 8 mA max. (only when driving LD_SDO) 33 LD_SDO CMOS output. General purpose output; lock detect, serial data out, others, selectable 34 VCCPS Power supply for RF divider. Nominal + 3.3V, 35 mA max. 36 TRIG CMOS input. External trigger. 38 RFOUT RF output (AC coupled). 40 VCCVCO1 Power Supply for VCO. Nomimal +5V, High Current, VCO dependent [1] Pins are not connected internally, however, pins must be connected to GND to maintain product family pin for pin compatibility. [2] BIAS ref voltage (pin 20) cannot drive an external load, and must be measured with a 10 GOhm meter such as Agilent 34410A; a typical 10 Mohm DVM will read erroneously. 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC778LP6CE v01.0112 FRACTIONAL-N PLL WITH INTEGRATED VCO, 9.6 - 10.8 GHz PLLs with Integrated VCO - SMT Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation PCB Schematic To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC778LP6CE from the “Search by Part Number” pull down menu to view the product splash page. Evaluation Order Information Item Contents Part Number Evaluation PCB Only HMC778LP6CE Evaluation PCB 130371-HMC778LP6CE Evaluation Kit HMC778LP6CE Evaluation PCB USB Interface Board 6’ USB A Male to USB B Female Cable CD ROM (Contains User Manual, Evaluation Software, Hittite PLL Design Software) EKIT01-HMC778LP6CE Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8
130371-HMC778LP6CE 价格&库存

很抱歉,暂时无法提供与“130371-HMC778LP6CE”相匹配的价格&库存,您可以联系我们找货

免费人工找货