ADL5601ARKZ-R7

50 MHz to 4.0 GHz RF/IF Gain Block ADL5601 Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM GND Fixed gain of 15 dB Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Ω Integrated bias control circuit OIP3 of 43.0 dBm at 900 MHz P1dB of 19.0 dBm at 900 MHz Noise figure of 3.7 dB at 900 MHz Single 5 V power supply Low quiescent current of 83 mA Thermally efficient SOT-89 package ESD rating of ±1.5 kV (Class 1C) (2) ADL5601 1 2 3 RFIN GND RFOUT 08219-001 BIAS Figure 1. GENERAL DESCRIPTION The ADL5601 is a broadband, 15 dB linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instrumentation equipment. The ADL5601 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4.0 GHz frequency range. The ADL5601 provides a gain of 15 dB, which is stable over frequency, temperature, and supply voltage, as well as from device to device. The device is internally matched to 50 Ω at the input and output, making the ADL5601 very easy to implement in a wide Rev. A variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. The ADL5601 is fabricated on an InGaP heterojunction bipolar transistor (HBT) process and has an ESD rating of ±1.5 kV (Class 1C). The device is available in a thermally efficient SOT-89 package. The ADL5601 consumes 83 mA on a single 5 V supply and is fully specified for operation from −40°C to +85°C. A fully populated RoHS-compliant evaluation board is available. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2009–2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADL5601 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Basic Connections .......................................................................... 12 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Soldering Information and Recommended PCB Land Pattern ........................................... 12 Revision History ............................................................................... 2 W-CDMA ACPR Performance .................................................... 13 Specifications..................................................................................... 3 Evaluation Board ............................................................................ 14 Typical Scattering Parameters (S-Parameters) ......................... 5 Outline Dimensions ....................................................................... 15 Absolute Maximum Ratings............................................................ 7 Ordering Guide .......................................................................... 15 ESD Caution .................................................................................. 7 Pin Configuration and Function Descriptions ............................. 8 Typical Performance Characteristics ............................................. 9 REVISION HISTORY 11/13—Rev. 0 to Rev. A Added Figure 15, Renumbered Sequentially ...............................11 Changes to Figure 17 .......................................................................12 Updated Outline Dimensions ........................................................15 9/09—Revision 0: Initial Version Rev. A | Page 2 of 16 Data Sheet ADL5601 SPECIFICATIONS VCC = 5 V and TA = 25°C, unless otherwise noted. Table 1. Parameter OVERALL FUNCTION Frequency Range FREQUENCY = 50 MHz Gain Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 140 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 350 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 700 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Test Conditions/Comments Min Typ 50 Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 14.3 ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V 18.0 Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm Rev. A | Page 3 of 16 Max Unit 4000 MHz 15.6 16.3 34.0 −50.7 −78.7 3.9 dB dBm dBm dBc dBc dB 15.4 ±0.05 ±0.19 ±0.02 18.8 34.7 −51.1 −77.3 3.8 dB dB dB dB dBm dBm dBc dBc dB 15.2 ±0.02 ±0.20 ±0.02 19.1 35.8 −53.8 −82.9 3.8 dB dB dB dB dBm dBm dBc dBc dB 15.2 ±0.01 ±0.21 ±0.02 19.0 40.7 −55.6 −77.9 3.8 16.5 dB dB dB dB dBm dBm dBc dBc dB ADL5601 Parameter FREQUENCY = 900 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2600 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 3500 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 4000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Data Sheet Test Conditions/Comments Min Typ Max Unit 14.3 15.3 ±0.01 ±0.22 ±0.02 19.0 43.0 −57.6 −78.7 3.7 16.5 dB dB dB dB dBm dBm dBc dBc dB ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V 18.0 Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm ±50 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Δf = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm Rev. A | Page 4 of 16 14.2 ±0.08 ±0.27 ±0.03 17.5 34.2 −41.9 −67.3 4.5 dB dB dB dB dBm dBm dBc dBc dB 13.4 ±0.04 ±0.20 ±0.04 16.0 30.7 −46.4 −65.4 4.7 dB dB dB dB dBm dBm dBc dBc dB 12.9 ±0.06 ±0.32 ±0.05 14.2 26.7 −41.0 −62.4 5.5 dB dB dB dB dBm dBm dBc dBc dB 12.1 ±0.11 ±0.50 ±0.05 12.7 24.7 −41.0 −59.7 6.1 dB dB dB dB dBm dBm dBc dBc dB Data Sheet ADL5601 Parameter POWER INTERFACE Supply Voltage (VCC) Supply Current vs. Temperature Power Dissipation Test Conditions/Comments VCC Min Typ Max Unit 4.5 5.0 83 ±2.3 0.42 5.5 100 V mA mA W −40°C ≤ TA ≤ +85°C VCC = 5 V TYPICAL SCATTERING PARAMETERS (S-PARAMETERS) VCC = 5 V, TA = 25°C, and the effects of the evaluation board have been deembedded up to the pins of the device. Table 2. Frequency (MHz) 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 S11 Magnitude (dB) −20.65 −25.05 −25.57 −24.93 −24.24 −23.29 −22.53 −22.07 −21.78 −21.51 −21.57 −21.78 −22.13 −22.68 −23.43 −24.35 −25.29 −25.88 −25.90 −25.31 −24.16 −23.38 −22.70 −22.10 −21.81 −21.78 −21.96 −22.31 −22.92 −23.53 −24.04 −24.50 −24.13 −23.01 −21.46 −19.67 −17.73 −15.95 −14.26 −12.72 −11.36 Angle (°) −144.57 +175.09 +149.73 +130.36 +114.36 +101.24 +88.38 +76.45 +66.13 +55.91 +46.37 +38.11 +30.61 +23.62 +18.47 +16.37 +16.28 +20.10 +25.78 +29.70 +29.42 +25.45 +20.88 +13.43 +4.90 −4.74 −15.31 −27.46 −40.13 −55.61 −74.40 −95.46 −118.14 −140.97 −161.36 −178.55 +167.17 +154.24 +141.96 +130.33 +119.00 S21 Magnitude (dB) +15.59 +15.34 +15.27 +15.20 +15.14 +15.07 +15.02 +14.97 +14.94 +14.92 +14.90 +14.89 +14.89 +14.88 +14.89 +14.89 +14.89 +14.88 +14.87 +14.87 +14.86 +14.83 +14.81 +14.80 +14.78 +14.75 +14.72 +14.68 +14.64 +14.60 +14.56 +14.49 +14.43 +14.37 +14.27 +14.18 +14.07 +13.92 +13.77 +13.60 +13.39 Angle (°) +161.69 +149.77 +136.48 +122.75 +108.91 +95.06 +81.26 +67.39 +53.57 +39.81 +25.97 +12.17 −1.54 −15.54 −29.41 −43.49 −57.51 −71.67 −85.39 −99.48 −113.64 −127.83 −141.81 −155.93 −170.15 +175.70 +161.57 +147.40 +133.17 +118.79 +104.52 +90.23 +75.97 +61.50 +47.04 +32.52 +18.07 +3.63 −10.89 −25.40 −39.85 Rev. A | Page 5 of 16 S12 Magnitude (dB) −19.76 −19.85 −19.89 −19.92 −19.96 −19.99 −20.03 −20.05 −20.07 −20.08 −20.09 −20.10 −20.10 −20.11 −20.11 −20.11 −20.12 −20.13 −20.14 −20.16 −20.18 −20.22 −20.25 −20.27 −20.31 −20.35 −20.40 −20.44 −20.50 −20.56 −20.62 −20.70 −20.79 −20.89 −21.00 −21.12 −21.26 −21.42 −21.60 −21.81 −22.05 Angle (°) −7.97 −24.47 −38.84 −52.66 −66.22 −79.64 −92.91 −106.12 −119.35 −132.53 −145.77 −159.04 −172.37 +174.38 +161.06 +147.71 +134.31 +120.86 +107.34 +93.84 +80.32 +66.77 +53.39 +39.79 +26.19 +12.56 −1.10 −14.74 −28.45 −42.17 −55.96 −69.82 −83.66 −97.51 −111.39 −125.37 −139.35 −153.36 −167.35 +178.67 +164.79 S22 Magnitude (dB) −16.61 −16.06 −15.85 −15.63 −15.49 −15.40 −15.35 −15.38 −15.48 −15.68 −16.07 −16.65 −17.41 −18.36 −19.65 −21.34 −23.41 −25.86 −28.12 −28.73 −27.11 −25.16 −23.33 −22.27 −21.38 −20.75 −20.35 −20.06 −19.80 −19.60 −19.29 −18.83 −18.22 −17.57 −16.78 −15.91 −14.91 −13.88 −12.82 −11.79 −10.77 Angle (°) −168.75 +164.97 +145.84 +128.22 +112.53 +98.52 +84.79 +71.26 +58.84 +46.57 +34.25 +22.42 +10.91 −0.29 −10.39 −18.60 −25.16 −26.32 −18.10 −1.68 +8.91 +5.98 +1.75 −8.80 −21.30 −35.07 −50.07 −66.34 −83.25 −100.18 −117.80 −135.14 −150.53 −164.65 −177.64 +170.73 +160.24 +150.20 +140.45 +130.63 +120.32 ADL5601 Frequency (MHz) 2100 2150 2200 2250 2300 2350 2400 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 Data Sheet S11 Magnitude (dB) −10.11 −9.04 −8.12 −7.33 −6.66 −6.11 −5.65 −5.28 −5.00 −4.78 −4.64 −4.54 −4.50 −4.52 −4.60 −4.72 −4.92 −5.18 −5.52 −5.95 −6.50 −7.17 −7.96 −8.95 −10.11 −11.43 −12.93 −14.51 −15.96 −16.86 −16.83 −15.98 −14.75 −13.43 −12.23 −11.21 −10.32 −9.59 −8.99 Angle (°) +107.84 +96.61 +85.63 +74.68 +63.86 +53.33 +42.82 +32.51 +22.51 +12.49 +2.62 −7.06 −16.80 −26.55 −36.24 −46.09 −56.14 −66.18 −76.58 −87.31 −98.20 −109.56 −121.53 −134.08 −147.58 −162.30 −178.72 +161.78 +138.82 +111.84 +83.89 +58.24 +36.92 +18.94 +3.37 −10.83 −24.29 −37.18 −49.64 S21 Magnitude (dB) +13.16 +12.90 +12.63 +12.34 +12.04 +11.75 +11.46 +11.18 +10.94 +10.73 +10.56 +10.43 +10.35 +10.31 +10.32 +10.37 +10.47 +10.60 +10.76 +10.96 +11.16 +11.37 +11.59 +11.77 +11.94 +12.09 +12.18 +12.24 +12.26 +12.24 +12.17 +12.06 +11.92 +11.76 +11.54 +11.31 +11.05 +10.78 +10.49 Angle (°) −54.15 −68.23 −82.16 −95.90 −109.35 −122.46 −135.36 −147.97 −160.34 −172.61 +175.37 +163.51 +151.65 +139.80 +127.87 +115.83 +103.58 +91.16 +78.44 +65.65 +52.38 +38.77 +24.80 +10.48 −4.10 −18.93 −34.00 −49.17 −64.42 −79.75 −95.04 −110.33 −125.55 −140.74 −155.80 −170.64 +174.74 +160.27 +146.04 Rev. A | Page 6 of 16 S12 Magnitude (dB) −22.31 −22.60 −22.91 −23.24 −23.59 −23.92 −24.25 −24.57 −24.86 −25.12 −25.33 −25.52 −25.66 −25.74 −25.78 −25.79 −25.75 −25.67 −25.57 −25.45 −25.30 −25.16 −25.03 −24.91 −24.71 −24.64 −24.61 −24.63 −24.69 −24.80 −24.97 −25.15 −25.39 −25.66 −25.97 −26.33 −26.71 −27.07 −27.43 Angle (°) +150.95 +137.28 +123.82 +110.57 +97.61 +84.90 +72.46 +60.24 +48.34 +36.64 +25.08 +13.55 +2.20 −9.14 −20.59 −32.13 −43.77 −55.71 −67.81 −80.30 −93.05 −106.14 −119.49 −133.23 −148.47 −162.78 −177.32 +168.07 +153.27 +138.48 +123.67 +108.97 +94.34 +79.90 +65.42 +51.35 +37.49 +23.89 +10.62 S22 Magnitude (dB) −9.78 −8.88 −8.12 −7.45 −6.85 −6.37 −6.00 −5.68 −5.44 −5.29 −5.19 −5.13 −5.13 −5.19 −5.27 −5.40 −5.60 −5.86 −6.16 −6.57 −7.07 −7.65 −8.35 −9.19 −10.19 −11.23 −12.44 −13.64 −14.74 −15.67 −16.20 −15.98 −15.33 −14.38 −13.18 −12.03 −11.04 −10.13 −9.28 Angle (°) +109.99 +99.58 +88.80 +77.69 +66.77 +55.88 +44.86 +33.86 +23.12 +12.46 +1.65 −9.06 −19.67 −30.41 −41.23 −52.01 −62.93 −74.10 −85.27 −96.63 −108.36 −120.33 −132.41 −144.97 −157.59 −171.07 +174.45 +158.38 +140.90 +121.24 +98.98 +76.14 +55.10 +35.05 +17.14 +1.60 −12.99 −27.31 −40.73 Data Sheet ADL5601 ABSOLUTE MAXIMUM RATINGS Table 3. Parameter Supply Voltage, VCC Input Power (Referred to 50 Ω) Internal Power Dissipation (Paddle Soldered) θJA (Junction to Air) θJC (Junction to Paddle) Maximum Junction Temperature Lead Temperature (Soldering, 60 sec) Operating Temperature Range Storage Temperature Range Rating 6.5 V 16 dBm 600 mW 30.7°C/W 5.0°C/W 150°C 240°C −40°C to +85°C −65°C to +150°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. A | Page 7 of 16 ADL5601 Data Sheet PIN CONFIGURATION AND FUNCTION DESCRIPTIONS RFIN 1 GND 2 RFOUT 3 ADL5601 (2) GND NOTES 1. THE EXPOSED PADDLE IS INTERNALLY CONNECTED TO GND AND MUST BE SOLDERED TO A LOW IMPEDANCE GROUND PLANE. 08219-002 TOP VIEW (Not to Scale) Figure 2. Pin Configuration Table 4. Pin Function Descriptions Pin No. 1 2 3 Mnemonic RFIN GND RFOUT (2) Exposed Paddle Description RF Input. This pin requires a dc blocking capacitor. Ground. Connect this pin to a low impedance ground plane. RF Output and Supply Voltage. A dc bias is provided to this pin through an inductor that is connected to the external power supply. The RF path requires a dc blocking capacitor. Exposed Paddle. The exposed paddle is internally connected to GND and must be soldered to a low impedance ground plane. Rev. A | Page 8 of 16 Data Sheet ADL5601 TYPICAL PERFORMANCE CHARACTERISTICS 45 26 45 +25°C 40 24 OIP3 30 20 P1dB 30 25 18 +25°C –40°C 16 GAIN 15 +85°C 20 P1dB (dBm) 25 14 10 0 0 0.4 0.8 1.2 20 15 +85°C 10 12 NF 5 35 –40°C 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) OIP3 (dBm) 22 5 4.0 10 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 08219-006 35 08219-020 NF, GAIN, P1dB, OIP3 (dB, dBm) 40 FREQUENCY (GHz) Figure 6. P1dB and OIP3 vs. Frequency and Temperature Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency 44 16.0 15.5 900MHz 42 –40°C 40 15.0 36 +25°C 14.0 OIP3 (dBm) 13.5 13.0 2000MHz 34 32 140MHz 50MHz 30 2600MHz 28 26 12.5 24 12.0 3500MHz 22 11.5 4000MHz 20 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) 18 –10 –8 08219-004 11.0 –6 –4 –2 0 2 4 6 8 10 12 14 16 POUT PER TONE (dBm) 08219-007 GAIN (dB) 14.5 700MHz 350MHz 38 +85°C Figure 7. OIP3 vs. Output Power (POUT) and Frequency Figure 4. Gain vs. Frequency and Temperature 0 7.5 7.0 –5 NOISE FIGURE (dB) –15 S22 –20 S12 –25 S11 6.0 +85°C 5.5 5.0 +25°C 4.5 –40°C 4.0 3.5 –30 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) Figure 5. Input Return Loss (S11), Output Return Loss (S22), and Reverse Isolation (S12) vs. Frequency 2.5 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 FREQUENCY (GHz) Figure 8. Noise Figure vs. Frequency and Temperature Rev. A | Page 9 of 16 4.0 08219-008 3.0 –35 08219-021 S-PARAMETERS (dB) 6.5 –10 ADL5601 Data Sheet –30 80 70 –40 PERCENTAGE (%) HARMONICS (dBc) 60 –50 H2 –60 –70 50 40 30 20 H3 –80 10 –90 2.0 2.5 3.0 3.5 4.0 FREQUENCY (GHz) 0 38 40 39 42 41 43 47 46 45 44 48 49 08219-010 1.5 1.0 4.4 08219-023 0.5 08219-022 0 OIP3 (dBm) Figure 12. OIP3 Distribution at 900 MHz, POUT = 0 dBm Figure 9. Single-Tone Harmonics vs. Frequency, POUT = 0 dBm 90 60 80 50 PERCENTAGE (%) PERCENTAGE (%) 70 60 50 40 30 40 30 20 20 10 10 14.5 14.7 14.9 15.1 15.3 15.5 15.7 15.9 GAIN (dB) 0 08219-011 0 3.0 3.2 3.4 3.6 Figure 10. Gain Distribution at 900 MHz 4.2 Figure 13. Noise Figure Distribution at 900 MHz 92 60 5.25V 90 50 SUPPLY CURRENT (mA) 88 40 30 20 86 84 5V 82 80 78 4.75V 76 10 72 –40 –30 –20 –10 0 18.4 18.6 18.8 19 19.2 19.4 P1dB (dBm) 19.6 0 10 20 30 40 50 60 70 TEMPERATURE (°C) Figure 11. P1dB Distribution at 900 MHz Figure 14. Supply Current vs. Temperature Rev. A | Page 10 of 16 80 90 08219-014 74 08219-012 PERCENTAGE (%) 4.0 3.8 NOISE FIGURE (dB) Data Sheet ADL5601 100 +85°C +25°C 90 85 –40°C 80 75 –6 –4 –2 0 2 4 6 8 10 12 14 16 18 20 22 POUT (dBm) 08219-100 SUPPLY CURRENT (mA) 95 Figure 15. Supply Current vs. POUT and Temperature VCC = 5 V Rev. A | Page 11 of 16 ADL5601 Data Sheet BASIC CONNECTIONS The basic connections for operating the ADL5601 are shown in Figure 16. Recommended components are listed in Table 5. The input and output should be ac-coupled with appropriately sized capacitors (the device characterization was performed with 0.1 μF capacitors). A 5 V dc bias is supplied to the amplifier through the bias inductor connected to RFOUT (Pin 3). The bias voltage should be decoupled using a 1 µF capacitor, a 1.2 nF capacitor, and a 68 pF capacitor. GND VCC C6 GND 1µF (2) SOLDERING INFORMATION AND RECOMMENDED PCB LAND PATTERN Figure 17 shows the recommended land pattern for the ADL5601. To minimize thermal impedance, the exposed paddle on the package underside, along with Pin 2, should be soldered to a ground plane. If multiple ground layers exist, they should be stitched together using vias. For more information on land pattern design and layout, refer to the AN-772 Application Note, A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP). C5 1.80mm 1.2nF ADL5601 C4 68pF 2 RFIN L1 470nH 3 GND RFOUT RFIN C2 0.1µF RFOUT 08219-015 C1 0.1µF 1 Figure 16. Basic Connections 0.762mm 0.635mm 3.48mm 5.37mm 0.20mm 0.62mm 0.86mm 1.27mm 0.86mm 08219-101 1.50mm 3.00mm Figure 17. Recommended Land Pattern Table 5. Recommended Components for Basic Connections Frequency 50 MHz to 4000 MHz C1 0.1 µF C2 0.1 µF L1 470 nH (Coilcraft 0603LS-NX or equivalent) Rev. A | Page 12 of 16 C4 68 pF C5 1.2 nF C6 1 µF Data Sheet ADL5601 W-CDMA ACPR PERFORMANCE –45 –50 –55 –60 –65 –70 –75 –20 –15 –10 –5 0 5 10 POUT (dBm) Figure 18. ACPR vs. POUT, Single W-CDMA Carrier (Test Model 1, 64) at 2140 MHz Rev. A | Page 13 of 16 08219-024 The ADL5601 achieves an ACPR of −69 dBc at −5 dBm output, at which point device noise, rather than distortion, begins to dominate the power in the adjacent channels. At an output power of +5 dBm, ACPR is still very low at −56 dBc, making the device particularly suitable for power amplifier (PA) driver applications. –40 ACPR AT 5MHz CARRIER OFFSET (dBc) Figure 18 shows a plot of the adjacent channel power ratio (ACPR) vs. POUT for the ADL5601. The signal type used is a single wideband code division multiple access (W-CDMA) carrier (Test Model 1, 64) at 2140 MHz. This signal is generated by a very low ACPR source. ACPR is measured at the output by a high dynamic range spectrum analyzer that incorporates an instrument noise-correction function. ADL5601 Data Sheet EVALUATION BOARD Figure 19 shows the evaluation board layout, and Figure 20 shows the schematic for the ADL5601 evaluation board. The board is powered by a single 5 V supply. GND VCC C6 GND 1µF (2) C5 The components used on the board are listed in Table 6. Power can be applied to the board through clip-on leads (VCC and GND). 1.2nF ADL5601 C4 68pF 1 RFIN L1 470nH 3 2 GND RFOUT RFIN C2 0.1µF RFOUT 08219-018 Figure 20. Evaluation Board Schematic Figure 19. Evaluation Board Layout (Top) Table 6. Evaluation Board Configuration Options Component C1, C2 L1 VCC and GND C4 C5 C6 Description AC coupling capacitors DC bias inductor Clip-on terminals for power supply Power supply decoupling capacitor Power supply decoupling capacitor Power supply decoupling capacitor Default Value 0.1 μF, 0402 470 nH, 0603 (Coilcraft 0603LS-NX or equivalent) 68 pF, 0603 1.2 nF, 0603 1 μF, 1206 Rev. A | Page 14 of 16 08219-019 C1 0.1µF Data Sheet ADL5601 OUTLINE DIMENSIONS 1.75 1.55 (2) 4.25 3.94 1 2 2.413 2.380 2.337 2.60 2.30 3 1.20 0.75 1.50 TYP 1.270 1.252 1.219 BOTTOM VIEW 0.635 0.569 0.508 3.00 TYP TOP VIEW 2.29 2.14 4.60 4.40 1.60 1.40 0.44 0.35 END VIEW 0.52 0.32 COMPLIANT TO JEDEC STANDARDS TO-243 09-12-2013-C PKG-003480 0.56 0.36 Figure 21. 3-Lead Small Outline Transistor Package [SOT-89] (RK-3) Dimensions shown in millimeters ORDERING GUIDE Model 1 ADL5601ARKZ-R7 ADL5601-EVALZ 1 Temperature Range −40°C to +85°C Package Description 3-Lead SOT-89, 7“ Tape and Reel Evaluation Board Z = RoHS Compliant Part. Rev. A | Page 15 of 16 Package Option RK-3 ADL5601 Data Sheet NOTES ©2009–2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D08219-0-11/13(A) Rev. A | Page 16 of 16