Precision ±2 g Dual Axis,
PWM Output Accelerometer
ADXL212
FEATURES
GENERAL DESCRIPTION
Dual axis accelerometer on a single IC chip
5 mm × 5 mm × 2 mm LCC package
5 mg resolution at 60 Hz
Low power: 700 μA at VS = 5 V (typical)
High zero g bias stability
High sensitivity accuracy
Pulse width modulated digital outputs
X- and Y-axis aligned to within 0.1° (typical)
Bandwidth adjustment with a single capacitor
Single-supply operation
3500 g shock survival
The ADXL212 is a high precision, low power, complete dual
axis accelerometer with signal conditioned, duty cycle modulated
outputs, all on a single monolithic IC. The ADXL212 measures
acceleration with a full-scale range of ±2 g (typical). The ADXL212
measures both dynamic acceleration (such as vibration) and
static acceleration (such as gravity).
The outputs are digital signals whose duty cycles (ratio of pulse
width to period) are proportional to acceleration (12.5%/g) in
each of the two sensitive axes. The duty cycle outputs can be
directly measured by a microcontroller without an analog-todigital converter (ADC) or glue logic. The output period is
adjustable from 0.5 ms to 10 ms via a single resistor (RSET).
APPLICATIONS
The typical noise floor is 500 μg/√Hz, allowing signals below
5 mg (0.3° of inclination) to be resolved in tilt sensing applications using narrow bandwidths (
很抱歉,暂时无法提供与“ADXL212AEZ”相匹配的价格&库存,您可以联系我们找货
免费人工找货