HMC-C051

HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz Features MIXERS High LO/RF Isolation: 43 dB Passive Double Balanced Topology Low Conversion Loss: 7 dB Wide IF Bandwidth: DC - 6 GHz Robust 1,000V ESD, Class 1C Typical Applications Hermetically Sealed Module The HMC-C051 is ideal for: Field Replaceable 2.92 mm (RF and LO) and SMA (IF) Connectors • Point-to-Point Radios -55 to +85 °C Operating Temperature • Point-to-Multi-Point Radios & VSAT • Test Equipment & Sensors General Description • Military End-Use The HMC-C051 is a general purpose double balanced mixer housed in a miniature hermetic module that can be used as an upconverter or downconverter between 11 and 20 GHz. This mixer is fabricated in a GaAs MESFET process, and requires no external components or matching circuitry. The HMC-C051 provides excellent LO to RF and LO to IF isolation due to optimized balun structures. The module features removable 2.92 mm (RF and LO) and SMA (IF) connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Functional Diagram Electrical Specifications, TA = +25° C, IF= 100 MHz, LO= +13 dBm* Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range, RF & LO 12 - 16 11 - 20 GHz Frequency Range, IF DC - 6 DC - 6 GHz Conversion Loss 7 Noise Figure (SSB) 6 9 8 11 dB 7.5 dB 43 dB LO to RF Isolation 38 44 32 LO to IF Isolation 36 40 36 41 dB RF to IF Isolation 19 28 19 29 dB IP3 (Input) 17 18 dBm IP2 (Input) 44 41 dBm 1 dB Gain Compression (Input) 10 11 dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 0-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm RF/IF LO/RF LO/IF -10 -5 -10 +25 C +85 C -55 C -15 -20 -30 -40 -50 -20 -60 10 12 14 16 18 20 22 10 12 FREQUENCY (GHz) 16 18 20 22 Return Loss @ LO = +13 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 14 FREQUENCY (GHz) Conversion Gain vs. LO Drive -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 -10 -15 -20 RF LO -25 -20 -30 10 12 14 16 18 20 22 10 12 FREQUENCY (GHz) 14 16 18 20 22 20 22 FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive IF Bandwidth @ LO = +13 dBm 0 CONVERSION GAIN (dB) 0 -5 RESPONSE (dB) MIXERS 0 ISOLATION (dB) CONVERSION GAIN (dB) 0 -10 IF Return Loss Conversion Gain -15 -20 -5 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 -20 0 1 2 3 4 FREQUENCY (GHz) 5 6 7 10 12 14 16 18 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-2 HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz Input IP3 vs. Temperature @ LO = +13 dBm* 30 30 25 25 20 20 IP3 (dBm) IP3 (dBm) MIXERS Input IP3 vs. LO Drive * 15 10 +25 C +85 C -55 C 10 +9 dBm +11 dBm +13 dBm +15 dBm 5 15 5 0 0 10 12 14 16 18 20 22 10 12 14 FREQUENCY (GHz) 60 50 50 40 40 IP2 (dBm) IP2 (dBm) 60 30 20 22 20 22 30 +25 C +85 C -55 C 20 +9 dBm +11 dBm +13 dBm +15 dBm 10 18 Input IP2 vs. Temperature @ LO = +13 dBm* Input IP2 vs. LO Drive * 20 16 FREQUENCY (GHz) 10 0 0 10 12 14 16 18 20 22 10 12 14 FREQUENCY (GHz) 16 18 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +13 dBm 14 13 P1dB (dBm) 12 11 10 9 +25 C +85 C -55 C 8 7 6 10 12 14 16 18 20 22 FREQUENCY (GHz) * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 0-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz RF / IF Input +25 dBm LO Drive +25 dBm Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1C MIXERS Absolute Maximum Ratings ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 15 34 32 xx 1 26 0 43 47 61 2 77 74 60 72 99 3 95 94 98 72 92 4 xx 108 108 103 106 RF Frequency= 15 GHz @ -10 dBm LO Frequency= 14.9 GHz @ +13 dBm All values in dBc below IF power level (1RF - 1LO). Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-4 HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz MIXERS Outline Drawing Package Information NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ Package Type C-11 2. PLATING: GOLD PLATE OVER NICKEL PLATE. Package Weight [1] 20 gms (Typ.) 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. Spacer Weight 2.6 gms (Typ.) [1] Package weight includes the connectors 3. MOUNTING SPACER: NICKEL PLATED ALUMINUM. 5. TOLERANCES: ±0.010 [0.23] UNLESS OTHERWISE SPECIFIED 6. FIELD REPLACEABLE 2.92mm CONNECTORS. TENSOLITE 231CCSF OR EQUIVALENT. [2] ±1 gms Tolerance 0-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC-C051 v04.1211 GaAs MMIC FUNDAMENTAL MIXER MODULE, 11 - 20 GHz Pin Descriptions Function Description 1 LO This pin is DC coupled and matched to 50 Ohms. 2 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 3 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 978-250-3343 tel • 978-250-3373 fax • Order at www.hittite.com Phone:On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS Pin Number 0-6