HMC188MS8E

HMC188MS8 / 188MS8E v04.0709 Typical Applications Features The HMC188MS8 / HMC188MS8E is suitable for: Conversion Loss: 15 dB • Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 45 dB • LMDS, VSAT, and Point-to-Point Radios Input Drive Level: 10 to 20 dBm • UNII & HiperLAN TE • Test Equipment Functional Diagram General Description LE The HMC188MS8 & HMC188MS8E are miniature frequency doublers in plastic 8-lead MSOP packages. The suppression of undesired fundamental and higher order harmonics is 45 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal. B SO FREQ. MULTIPLIERS - PASSIVE - SMT 7 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT O Electrical Specifi cations, TA = +25° C, As a Function of Drive Level Parameter Frequency Range, Input Frequency Range, Output Conversion Loss 7 - 16 Input = +10 dBm Min. Typ. Input = +15 dBm Max. Min. Typ. Input = +20 dBm Max. Min. Typ. Max. Units 1.75 - 2.75 1.5 - 2.5 1.25 - 3.0 GHz 3.5 - 5.5 3.0 - 5.0 2.5 - 6.0 GHz 19 22 15 18 16 19 dB FO Isolation (with respect to input level) 35 45 dB 3FO Isolation (with respect to input level) 43 50 dB 4FO Isolation (with respect to input level) 38 45 dB For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Conversion Loss @ +15 dBm Drive Level Isolation @ +15 dBm Drive Level* -40C -10 -10 -20 -20 +25C -30 -40 -50 4Fo -60 -70 TE +85C Fo -30 -40 3Fo -80 -90 -50 -100 0 1 2 3 4 5 6 7 8 OUTPUT FREQUENCY (GHz) 0 5 10 FREQUENCY (GHz) 15 20 Input Return Loss vs. Drive Level Output Return Loss vs. Drive Level -5 -10 Input = +15 dBm -15 Input = +20 dBm -20 -25 0 1 2 3 4 5 6 7 8 OUTPUT RETURN LOSS (dB) 0 Input = +10 dBm B SO INPUT RETURN LOSS (dB) 0 LE *With respect to input level Input = +10 dBm -5 -10 -15 Input = +15 dBm Input = +20 dBm -20 -25 0 1 2 3 4 5 6 7 8 OUTPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) Note: Output return loss measured at 2fo, with +10dBm, +15 dBm, and +20 dBm drive levels on input of doubler. Absolute Maximum Ratings O Conversion Loss vs. Drive Level 0 CONVERSION LOSS (dB) FREQ. MULTIPLIERS - PASSIVE - SMT ISOLATION (dB) CONVERSION LOSS (dB) 7 0 0 Input Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Input = +20 dBm -10 -20 Input = +10 dBm ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS -30 Input = +13 dBm Input = +15 dBm -40 -50 0 1 2 3 4 5 6 7 8 OUTPUT FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 7 - 17 HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Outline Drawing TE LE NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. B SO FREQ. MULTIPLIERS - PASSIVE - SMT 7 Package Information Part Number Package Body Material Lead Finish MSL Rating HMC188MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC188MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H188 XXXX [2] H188 XXXX O [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Description 7 - 18 Pin Number Function Description 1, 3 - 6, 8 GND All ground leads must be soldered to PCB RF/DC ground. 2 RFIN Pin is DC coupled and matched to 50 Ohms from 1.25 to 3.0 GHz 7 RFOUT Pin is DC coupled and matched to 50 Ohms from 2.5 to 6.0 GHz Interface Schematic For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Evaluation PCB FREQ. MULTIPLIERS - PASSIVE - SMT B SO LE TE 7 O List of Materials for Evaluation PCB 103313 [1] Item Description J1 - J3 PCB Mount SMA Connector C1 1,000 pF Capacitor, 0603 Pkg. U1 HMC188MS8 / HMC188MS8E x4 Active Multiplier PCB [2] 104610 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 7 - 19