HMC746LC3CTR-R5

HMC746LC3C v06.0814 HIGH SPEED LOGIC - SMT 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Typical Applications Features The HMC746LC3C is ideal for: Supports High Data Rates: up to 14 Gbps • RF ATE Applications Differential & Single-Ended Operation • Broadband Test & Measurement Fast Rise and Fall Times: 22 / 21 ps • Serial Data Transmission up to 14 Gbps Low Power Consumption: 230 mW typ. • Digital Logic Systems up to 14 GHz Programmable Differential Output Voltage Swing: 600 - 1100 mV • NRZ-to-RZ Conversion Propagation Delay: 95 ps Single Supply: +3.3 V 16 Lead Ceramic 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description The HMC746LC3C is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 14 Gbps, and clock frequencies as high as 14 GHz. The HMC746LC3C may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR. All differential inputs to the HMC746LC3C are CML and terminated on-chip with 50 Ohms to the positive supply, Vcc, and may be AC or DC coupled. The differential CML outputs are source terminated to 50 Ohms and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ohm Vcc-terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC746LC3C also features an output level control pin, VR, which allows for loss compensation or signal-level optimazation. the HMC746LC3C operates from a single 3.3 V supply and is available in ROHS-compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 °C, Vcc = 3.3 V Parameter Conditions Power Supply Voltage Min. Typ. Max 3.0 3.3 3.6 V Power Supply Current 70 mA Maximum Data Rate 14 Gbps Maximum Clock Rate 14 Input Voltage Range Input Differential Range Input Return Loss Output Amplitude 1 Units GHz Vcc - 1.5 Vcc + 0.5 V 0.1 2 Vp-p Frequency