HMC7992LP3DE

Nonreflective, Silicon SP4T Switch, 0.1 GHz to 6.0 GHz HMC7992 Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM GND RFC GND GND 16 15 14 13 HMC7992 RF4 1 12 RF1 GND 2 11 GND GND 3 10 GND RF3 4 9 RF2 2:4 TTL DECODER 5 6 7 8 GND VDD B A PACKAGE BASE GND APPLICATIONS 13714-001 Nonreflective, 50 Ω design High isolation: 45 dB typical at 2 GHz Low insertion loss: 0.6 dB at 2 GHz High power handling 33 dBm through path 27 dBm terminated path High linearity 1 dB compression (P1dB): 35 dBm typical Input third-order intercept (IIP3): 58 dBm typical ESD rating: 2 kV human body model (HBM), Class 2 Single positive supply: 3.3 V to 5.0 V Standard TTL-, CMOS-, and 1.8 V-compatible control 16-lead, 3 mm × 3 mm LFCSP package (9 mm2) Pin compatible with the HMC241ALP3E Figure 1. Cellular/4G infrastructure Wireless infrastructure Automotive telematics Mobile radios Test equipment GENERAL DESCRIPTION The HMC7992 is a general-purpose, nonreflective, 0.1 GHz to 6.0 GHz, silicon, single-pole, four-throw (SP4T) switch in a leadless, surface-mount package. The switch is ideal for cellular infrastructure applications, offers high isolation of 45 dB typical at 2 GHz, and a low insertion loss of 0.6 dB at 2 GHz. It offers excellent power handling capability up to 6.0 GHz, with input power of 1 dB compression point (P1dB) of 35 dBm at 5 V operation. The HMC7992 has good low frequency input power handling below 0.1 GHz and can operate well down to 10 kHz, with a typical 1 dB compression of 21 dBm (see Figure 21) and an IIP3 of 37 dBm (see Figure 22) at 1 MHz. Rev. A The on-chip circuitry allows the HMC7992 to operate at a single, positive supply voltage range from 3.3 V to 5 V, and as well as a single, positive control voltage from 0 V to 1.8 V/3.3 V/5.0 V. A 2:4 decoder integrated in the switch requires only two controlled input signals, with a positive control voltage range from 0 V to 1.8 V/3.3 V/5.0 V, to select one of the four radio frequency (RF) paths. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2016–2019 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC7992 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1  Insertion Loss, Isolation, and Return Loss ................................6  Applications ....................................................................................... 1  Input Compression and Input Third-Order Intercept (0.1 GHz to 6.0 GHz) ....................................................................8  Functional Block Diagram .............................................................. 1  General Description ......................................................................... 1  Revision History ............................................................................... 2  Specifications..................................................................................... 3  Absolute Maximum Ratings............................................................ 4  ESD Caution .................................................................................. 4  Pin Configuration and Function Descriptions ............................. 5  Input Compression and Input Third-Order Intercept (10 kHz to 1 GHz) ........................................................................................9  Theory of Operation ...................................................................... 10  Applications Information .............................................................. 11  Outline Dimensions ....................................................................... 12  Ordering Guide .......................................................................... 12  Interface Schematics..................................................................... 5  Typical Performance Characteristics ............................................. 6  REVISION HISTORY 8/2019—Rev. 0 to Rev. A Changes to Specifications Section and Table 1 ............................. 3 Deleted Table 2 and Table 3; Renumbered Sequentially ............. 4 Changes to Table 3 ............................................................................ 5 Moved Table 4 ................................................................................. 10 Deleted Table 5 ................................................................................ 10 Changes to Ordering Guide .......................................................... 12 1/2016—Revision 0: Initial Version Rev. A | Page 2 of 12 Data Sheet HMC7992 SPECIFICATIONS VDD = 3.3 V to 5.0 V, VCTL = 0 V/VDD, TCASE = 25°C, 50 Ω system, unless otherwise noted. Table 1. Parameter INSERTION LOSS Symbol ISOLATION RFC to RF1to RF4 (Worst Case) RETURN LOSS On State Off State SWITCHING SPEED Rise Time and Fall Time On Time and Off Time RADIO FREQUENCY (RF) SETTLING TIME INPUT POWER COMPRESSION 1 dB Compression 0.1 dB Compression INPUT THIRD-ORDER INTERCEPT DIGITAL CONTROL VOLTAGES Low Voltage High Voltage BIAS AND SUPPLY CURRENT VDD = 3.3 V VDD = 5 V RECOMMENDED OPERATING CONDITIONS Bias Voltage Range Control Voltage Range Case Temperature Range Maximum RF Input Power Through Path Terminated Path Hot Switching tRISE, tFALL tON, tOFF P1dB P0.1dB IIP3 VIL VIH Test Conditions/Comments 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz Min Typ 0.6 0.7 1.0 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 40 32 25 45 37 30 dB dB dB 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 0.1 GHz to 2.0 GHz 0.4 GHz to 1.0 GHz 1.0 GHz to 6.0 GHz 25 24 17 7 15 20 dB dB dB dB dB dB 10% to 90% of RF output 50% of VCTL to 90% of RF output 50% VCTL to 0.1 dB margin of final RFOUT 0.1 GHz to 6.0 GHz VDD = 5 V VDD = 3.3 V VDD = 5 V VDD = 3.3 V 0.1 GHz to 6.0 GHz, two-tone input power = 14 dBm/tone VDD = 5 V VDD = 3.3 V