HMC851LC3CTR

HMC851LC3C v02.0614 HIGH SPEED LOGIC - SMT 28 Gbps, XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE Typical Applications Features The HMC851LC3C is ideal for: Inputs Terminated Internally in 50 Ohms • RF ATE Applications Differential & Singe-Ended Operation • Broadband Test & Measurement Fast Rise and Fall Times: 15 / 14 ps • Serial Data Transmission up to 28 Gbps Low Power Consumption: 241 mW typ. Programmable Differential Output Voltage Swing: 500 - 1300 mV Propagation Delay: 97 ps Single Supply: -3.3V 16 Lead Ceramic 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description The HMC851LC3C is a XOR/XNOR gate function designed to support data transmission rates of up to 28 Gbps, and clock frequencies as high as 28 GHz. The HMC851LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input signals to the HMC851LC3C are terminated with 50 ohms to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC851LC3C may be either AC or DC coupled. Outputs can be connected directly to a 50 ohm to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 ohms to a non-ground DC voltage. The HMC851LC3C operates from a single -3.3 V DC supply, and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 °C, Vee = -3.3 V, VR = 0 Parameter Conditions Power Supply Voltage Min. Typ. Max Units -3.6 -3.3 -3.0 V Power Supply Current 73 mA Maximum Data Rate 28 Gbps Maximum Clock Rate GHz -0.5 0.5 V Input Low Voltage -1.0 0.0 V Input Return Loss Output Amplitude Output High Voltage 1 28 Input High Voltage Frequency