MAX20096EVKIT#

  MAX20096EVKIT Evaluation Kit for the MAX20096 NDA Required. Request Full Data Sheet Description The MAX20096 evaluation kit (EV kit) provides a proven design to evaluate the MAX20096 dual-channel synchronous buck, high-brightness LED controller with and without SPI interface for high-power HB LED drivers. The EV kit is set up as a dual-buck LED driver and operates from a 4.5V to 65V DC supply voltage. The EV kit is configured to deliver up to 3A in each string of LEDs for both channels. The total voltage of the string can vary from 3V to 55V. The anode of the LED string should be connected to the LED+ terminal; the cathode should be connected to PGND. Key Features          4.5V to 65V Input Voltage Drives 1–16 LEDs in Each of the Dual Channels 0A to 3A LED Current Demonstrates SPI Interface Capability Demonstrates PWM Dimming and Analog Dimming Using the SPI Interface Demonstrates LED Open/Short Faults Monitoring Using the SPI Interface Monitors the LED Current Using the Graphical User Interface (GUI) Proven PCB and Thermal Design Fully Assembled and Tested Applications/Uses      Automotive Exterior Lighting Commercial, Industrial, and Architectural Lighting Daytime Running Lights (DRLs) Fog Light and Adaptive Front Light Assemblies High-Beam/Low-Beam/Signal/Position Lights https://www.maximintegrated.com/en/products/power/led-drivers/MAX20096EVKIT.html 10-15-18