19-3009; Rev 3; 12/04
Precision-Matched Resistor-Divider in SOT23
The MAX5491 precision resistor-divider consists of two
accurately matched resistors with access to the ends
and center of the divider. This device offers excellent
resistance matching of 0.035% (A grade), 0.05% (B
grade), and 0.1% (C grade). The MAX5491 includes an
extremely low resistance-ratio temperature drift of
2ppm/°C over -40°C to +85°C, and has an end-to-end
resistance of 30kΩ. Resistance ratios from 1:1 to 30:1 are
available. Ten standard ratios are available (see Table
1), and custom ratios are also available upon request. To
enhance device and system robustness, the MAX5491
also features ±2kV Human Body Model electrostatic discharge (ESD) protection to ensure against real-world
ESD events. The MAX5491 is ideal for precision gain-setting applications where tight resistance matching and
low temperature drift are necessary.
The MAX5491 is available in a space-saving 3-pin
SOT23 package, and is guaranteed over the extended
-40°C to +85°C temperature range.
Features
♦ Resistance Ratios from 1:1 to 30:1
♦ Custom Ratios Available Upon Request
♦ ±2kV Human Body Model ESD Protection
♦ Tight Initial Ratio Accuracy
0.035% (MAX5491A)
0.05% (MAX5491B)
0.1% (MAX5491C)
♦ Low 2ppm/°C Resistor-Ratio-Drift
♦ Up to 50V Operating Voltage Across Sum of R1
and R2
♦ Tiny 3-Pin SOT23 Package
Ordering Information*
Applications
Industrial Process Control
TEMP
RANGE
PART
Instrumentation
Precision Gain Setting
Medical Equipment
Automatic Test Equipment
Base Stations
RATIO
PINACCURACY
PACKAGE
(%)
MAX5491_A_ _ _ _ _ -T -40°C to +85°C 3 SOT23-3
0.035
MAX5491_B_ _ _ _ _ -T -40°C to +85°C 3 SOT23-3
0.05
MAX5491_C_ _ _ _ _ -T -40°C to +85°C 3 SOT23-3
0.1
*See the How to Order section for more details.
Pin Configuration
Block Diagram
TOP VIEW
P1
MAX5491
P1
R1
1
MAX5491
P3
R2
P2
3
P3
P2 2
SOT23
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX5491
General Description
MAX5491
Precision-Matched Resistor-Divider in SOT23
ABSOLUTE MAXIMUM RATINGS
Voltage Between P1 and P2...................................................50V
Continuous Current into Any Pin....................................±1.75mA
Continuous Power Dissipation (TA = +70°C)
3-Pin SOT23 (derate 7.1mW/°C above +70°C).........571.4mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
Initial Resistor Ratio Error (Note 2)
CONDITIONS
±0.035
±0.05
MAX5491_C, TA = +25°C
±0.1
4
10:1 < ratio ≤ 30:1
5.5
35
(Note 4)
Voltage Coefficient of Resistance
VCR
(Note 5)
28.5
30
IR1, IR2
VP1-P2
0
Power Rating
Pin Capacitance
2000hr at +70°C
%
ppm/°C
ppm/°C
0.1
End-to-End Resistance (R1 + R2)
UNITS
2
3.2:1 < ratio ≤ 10:1
TCR
Resistance Ratio Long-Term
Stability
MAX
MAX5491_B, TA = +25°C
Absolute Temperature Coefficient
of Resistance
Continuous Current
TYP
MAX5491_A, TA = +25°C
1:1 ≤ ratio ≤ 3.2:1
Resistance-Ratio Temperature
Coefficient (Note 3)
Continuous Working Voltage
Between P1 and P2
MIN
ppm/V
31.5
kΩ
±1.75
mA
50
V
87.5
mW
2
pF
±0.03
%
Note 1: The MAX5491 is 100% production tested at TA = +25°C. Specifications over -40°C to +85°C are guaranteed by design.
Note 2: Testing conditions: TA = +25°C, VP1-P2 = 9V and 50V.
Note 3: Resistance-ratio temperature coefficient is defined as
Note 4: Absolute TCR is defined as
and is tested at 9V and 50V.
∆(R1 + R2 )
(R1 + R2 ) × ∆ T
Note 5: Resistance-ratio voltage coefficient is defined as
2
⎛R ⎞
∆⎜ 1 ⎟
⎝ R2 ⎠
R1
× ∆T
R2
⎛R ⎞
∆⎜ 1 ⎟
⎝ R2 ⎠
R1
× ∆V
R2
_______________________________________________________________________________________
Precision-Matched Resistor-Divider in SOT23
NORMALIZED RESISTOR-RATIO DRIFT
vs. TEMPERATURE
300
400
200
200
RATIO DRIFT (ppm)
RATIO DRIFT (ppm)
VP1-P2 = 10V
RATIO = 5:1
300
MAX5491 toc02
VP1-P2 = 10V
RATIO = 1:1
MAX5491 toc01
400
NORMALIZED RESISTOR-RATIO DRIFT
vs. TEMPERATURE
100
0
-100
100
0
-100
-200
-200
-300
-300
-400
-400
-50
-25
0
25
50
75
100
-50
TEMPERATURE (°C)
-25
0
25
50
75
100
TEMPERATURE (°C)
Pin Description
PIN
NAME
FUNCTION
1
P1
R1 Connection Terminal
2
P2
R2 Connection Terminal
3
P3
Midpoint Between R1 and R2 Connection Terminals
Detailed Description
As shown in the Block Diagram, the MAX5491 consists
of two precision, low-ratio-drift resistors with an end-toend resistance of 30kΩ (R1 + R2). P3 is the center tap
of the divider. The maximum working voltage of the
MAX5491 is 50V. This device offers a wide range of
resistance ratios (R1/R2) from 1:1 to 30:1 and is ideally
suited for precision operational amplifier gain/attenuation control. The MAX5491 features a ±2kV ESD protection that enhances system robustness. A maximum
initial ratio accuracy of 0.035% and a low 2ppm/°C ratio
drift enhance system accuracy.
_______________________________________________________________________________________
3
MAX5491
Typical Operating Characteristics
(VP1-P2 = 10V, TA = +25°C, unless otherwise noted.)
Precision-Matched Resistor-Divider in SOT23
MAX5491
Typical Applications
A =
VOUT
R
= − 1
VIN
R2
A =
IN
VOUT
R
= 1+ 1
VIN
R2
OUT
OUT
P3
P3
MAX5491
P2
P1
R2
MAX5491
P2
IN
R1
R2
Figure 1. Inverting Amplifier Configuration
R1
Figure 2. Noninverting Amplifier Configuration
IN
A =
P1
VOUT
R2
=
VIN
R1 + R2
IN
A =
P1
VOUT
R2
=
VIN
R1 + R2
MAX5491
P1
R1
MAX5491
P3
R1
P3
OUT
R2
OUT
R2
P2
P2
Figure 3. Buffered Attenuator
Figure 4. Attenuator with Buffer
Applications Information
Self-Heating and Error
Applying a voltage across terminals P1 and P2 causes
the device to heat up due to power dissipation. In highvoltage applications, consider the error in resistanceratio temperature coefficient caused by self-heating.
The worst-case self-heating occurs when the operating
voltage attains its maximum value. Approximate the
result of power dissipation under this condition as:
PDISS =
4
(VMAX )2
R
=
(50V)2
30kΩ
The thermal resistance from junction to ambient, θJ-A,
for a 3-pin SOT23 package is 141°C/W. Calculate the
resulting temperature rise as:
∆T = 83.3mW x 141°C/W = 11.7°C
If the ratio temperature coefficient is 2ppm/°C (typ), the
total error introduced by self-heating is:
11.7°C x 2ppm/°C = 23.4ppm
= 83.3mW
_______________________________________________________________________________________
Precision-Matched Resistor-Divider in SOT23
PREFIX
MAX
5491
V
A
10000
-T
ROOT PART NUMBER
MAX5491 = 30kΩ End-to-End
RATIO RANGE
L through W. Resistor ratio must fall in the appropriate
ratio range. (See Table 2.)
RATIO ACCURACY
A = 0.035% (max); B = 0.05% (max); C = 0.1% (max)
RESISTANCE RATIO
Five number ratio designator. Ratios available from 1:1 to 30:1.
Format examples:
010000 = 1:1
02500 = 2.5:1
07538 = 7.538:1
25000 = 25:1
TAPE AND REEL
Example Part Numbers
PART
RESISTOR-RATIO RANGE
RESISTOR-RATIO
ACCURACY (% MAX)
RESISTOR RATIO
MAX5491RA02500-T
2.000 to 2.899
0.035
2.5:1
MAX5491VC10000-T
10.000 to 15.999
0.100
10:1
MAX5491SB03200-T
2.900 to 3.999
0.050
3.2:1
MAX5491UA07538-T
6.000 to 9.999
0.035
7.538:1
Table 1. Standard Ratios*
RESISTOR RATIO
RESISTOR-RATIO
SUFFIX
RESISTOR-RATIO
ACCURACY (% MAX)
TOP MARK
MAX5491LA01000-T
1:1
01000
0.035
FZPD
MAX5491LB01000-T
1:1
01000
0.050
FZPE
MAX5491LC01000-T
1:1
01000
0.100
FZPF
MAX5491MA01100-T
1.1:1
01100
0.035
FZPA
MAX5491MB01100-T
1.1:1
01100
0.050
FZPB
MAX5491MC01100-T
1.1:1
01100
0.100
FZPC
MAX5491NA01500-T
1.5:1
01500
0.035
FZOX
MAX5491NB01500-T
1.5:1
01500
0.050
FZOY
MAX5491NC01500-T
1.5:1
01500
0.100
FZOZ
MAX5491PA02000-T
2:1
02000
0.035
FZOO
MAX5491PB02000-T
2:1
02000
0.050
FZOP
MAX5491PC02000-T
2:1
02000
0.100
FZOQ
MAX5491RA02500-T
2.5:1
02500
0.035
FZPP
PART
_______________________________________________________________________________________
5
MAX5491
How to Order
MAX5491
Precision-Matched Resistor-Divider in SOT23
Table 1. Standard Ratios* (continued)
PART
RESISTOR RATIO
RESISTOR-RATIO
SUFFIX
RESISTOR-RATIO
ACCURACY (% MAX)
TOP MARK
2.5:1
02500
0.050
FZPQ
MAX5491RB02500-T
MAX5491RC02500-T
2.5:1
02500
0.100
FZON
MAX5491SA03200-T
3.2:1
03200
0.035
FZOU
MAX5491SB03200-T
3.2:1
03200
0.050
FZOV
MAX5491SC03200-T
3.2:1
03200
0.100
FZOW
MAX5491TA05000-T
5:1
05000
0.035
FZOR
MAX5491TB05000-T
5:1
05000
0.050
FZOS
MAX5491TC05000-T
5:1
05000
0.100
FZOT
MAX5491UA07538-T
7.538:1
07538
0.035
FZPM
MAX5491UB07538-T
7.538:1
07538
0.050
FZPN
MAX5491UC07538-T
7.538:1
07538
0.100
FZPO
MAX5491VA10000-T
10:1
10000
0.035
FZPJ
MAX5491VB10000-T
10:1
10000
0.050
FZPK
MAX5491VC10000-T
10:1
10000
0.100
FZPL
MAX5491WA30000-T
30:1
30000
0.035
FZPG
MAX5491WB30000-T
30:1
30000
0.050
FZPH
MAX5491WC30000-T
30:1
30000
0.100
FZPI
*Standard ratios are available for ordering in any quantity. Nonstandard ratios are also available for values between 1:1 to 30:1.
A minimum order quantity of 10,000 units is required for nonstandard ratios. Please contact factory for more information.
Table 2. Ratio Ranges
LETTER SUFFIX
6
Chip Information
RESISTOR-RATIO RANGE
L
1.000 to 1.099
M
1.100 to 1.349
N
1.350 to 1.699
P
1.700 to 2.000
R
2.001 to 2.899
S
2.900 to 3.999
T
4.000 to 5.999
U
6.000 to 9.999
V
10.000 to 15.999
W
16.000 to 30.000
TRANSISTOR COUNT: 0
PROCESS: BiCMOS
_______________________________________________________________________________________
Precision-Matched Resistor-Divider in SOT23
SOT23 L.EPS
PACKAGE OUTLINE, 3L SOT-23
21-0051
F
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 7
© 2004 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX5491
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
很抱歉,暂时无法提供与“MAX5491VC10000+”相匹配的价格&库存,您可以联系我们找货
免费人工找货