AMS5010GN

Advanced Monolithic Systems FEATURES • Low Temperature Coefficient •Wide Operating Current Range: 50µA to 5mA • Low Output Impedance: 0.6Ω Typ. • Superior Replacement for Other 1.2V References • No Frequency Compensation Required • Low Cost AMS5010 1.2V VOLTAGE REFERENCE RoHS compliant APPLICATIONS • Battery Powered Systems • Instrumentation • A/D, D/A Converters • Monitors/ VCR/ TV • Current sources GENERAL DESCRIPTION The AMS5010 is a two-terminal band-gap voltage reference diode, which provides a fixed 1.22V output voltage. This device features a low output impedance and low temperature coefficient, operating over a 50µA to 5mA current range. The AMS5010 is ideal for usage in battery power instrument application as well as a reference for CMOS A/D converters. The AMS5010NT, MT, LN, HN, GH grades are specified operational over a temperature range of 0°C to 70°C while AMS5010LT, KT, JT grades are rated over the full -55°C to +125°C temperature range. The AMS5010 is available in TO-92 and TO-52 (metal can) packages. ORDERING INFORMATION: MAX. TEMPCO 5ppm/°C 10ppm/°C 25ppm°C 50ppm/°C 100ppm°C 25ppm/°C 50ppm/°C 100ppm°C PACKAGE TYPE TO-92 AMS5010LN AMS5010HN AMS5010GN TO-52 AMS5010NT AMS5010MT AMS5010LT AMS5010KT AMS5010JT OPERATING TEMPERATURE RANGE 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C -55°C to +125°C -55°C to +125°C -55°C to +125°C PIN CONNECTIONS TO-92 Plastic Package (N) + 2 1 TO-52 Metal Can Package (T) 2 + 1 - Bottom View Bottom View Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS5010 ABSOLUTE MAXIMUM RATINGS Reverse Current Forward Current Operating Temperature Range NT, MT, LN, HN, GN LT, KT, JT 10mA 10mA 0°C to 70°C -55°C to +125°C Storage Temperature TO-92 package Storage Temperature TO-52 package Lead Temperature (Soldering 25 sec.) Maximum Power Dissipation (at 25°C) TO-52 TO-92 -65°C to +150°C -65°C to +200°C 265°C 750mW 600mW ELECTRICAL CHARACTERISTICS Electrical Characteristics at IR = 500 µA, and TA = +25°C unless otherwise specified. Parameter Reference Voltage Reference Current (Note 3) Reverse Current Dynamic Output Impedance To rated specs. IR = 100 µA IR = 500 µA RMS Noise Voltage (Note 4) Temperature Coefficient (Note 5) AMS5010G – J AMS5010H – K AMS5010L AMS5010M AMS501N IR = 500 µA, 10Hz ≤ f ≤ 10kHz 50µA ≤ IR ≤ 5mA TMIN ≤ TA ≤ TMAX 30 25 10 5 3 100 50 25 10 5 ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C Conditions IR = 100 µA Min 1.20 50 50 AMS5010 Typ 1.220 100 Max 1.25 5000 100 Units V µA µA Ω Ω µV .6 .6 5 2 Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note 2: For elevated temperature operation, Tj max is ≤+150°C Thermal Resistance ϕ JA (junction to ambient) TO-92 170°C/W (0.125” leads) TO-52 140°C/W Note 3: Optimum performance is obtained at currents below 500µA. For current operation below 200µA, stray shunt capacitances should be limited to 20pF or increased to 1µF. If strays can not be avoided, a shunt capacitor of at least 1000pF is recommended. Note 4: Guaranteed but not 100% production tested. These limits are not used to calculate average outgoing quality levels. Note 5: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating TMAX and TMIN, divided by TMAX - TMIN. Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723