LXD75-0700SH

LED Power Supplies 75W LED Power 75W LXD75H series LED Power Supply 480VAC Input Dimmable LED Power Supplies The LXD75H series of constant output current LED power supplies operates off an input voltage of 249-528VAC making it ideal for 347VAC and 480VAC input lighting systems, such as highway lighting. LED POWER next generation power source The LXD75H series provides up to 3150mA of output current or 214V output voltage solutions for specific LED requirements. With industry leading efficiencies, and an extensive protection feature set, the LXD75H series provides high reliability and high performance in a compact package. The LXD75H series carries the UL and CE mark for safety and is also RoHS compliant. FEATURES • High Efficiency (up to 87%) • High Input 249-528VAC • Constant Output Current • Active PFC (Typical 0.95) • IP67 Waterproof • OVP, SCP, OTP • -35 to 70°C deg operation • UL8750 Approved • EN61347-1, -2-13 compliant Model Number Output Voltage LXD75-0350SH(2) LXD75-0700SH(2) LXD75-1050SH(2) LXD75-1400SH(3) LXD75-2100SH(4) LXD75-3150SH(4) 107-214V 53-107V 36-72V 26-53V 18-36V 12-24V Output Current Range 35-350mA 70-700mA 105-1050mA 140-1400mA 210-2100mA 315-3500mA Input Voltage 249-528VAC 249-528VAC 249-528VAC 249-528VAC 249-528VAC 249-528VAC OVP Latching max 321V 161V 108V 81V 54V 36V Efficiency 87.0% 86.0% 87.0% 87.0% 86.0% 85.0% Input Specifications Parameter Input Voltage Range Input Frequency Range Input Current Leakage Current Inrush Current Power Factor Conditions/Description Min 249 47 277AC in, 75W output 480VAC in, 50Hz 480VAC in, 25°C, Cold Start 480VAC, 277VAC 0.90 Conditions/Description Min Nom Max 528 63 0.32 2.0 60 0.95 Units VAC Hz A mA A Nom Max ±1 ±3 Units % % ±5 30 3.0 % % s Output Specifications Parameter Line Regulation Load Regulation Voltage Range Output Current Range Output Current Tolerance Output Current Ripple Turn-on Delay Short Circuit Protection Over Voltage Protection Over Temp Protection See table of outputs See table of outputs % load Measured at 277/480VAC and full load Auto Recovery Latching. See individual models OVP levels Latching, 110°C internal component temperature 20 1.0 120 135 150 %Vout Min 3750 1500 Nom Max Units VAC VAC 1 General Specifications Parameter Isolation Voltage Efficiency Safety MTBF Lifetime Weight Operating Temperature Storage Temperature Relative Humidity Note Note Note Note 1. 2. 3. 4. Conditions/Description Input to Output See Note 1 Input to Chassis See individual models UL8750, UL1310 (See Notes 2,3 & 4), EN61347-1,-2-13 MIL-HDBK-217F, 480VAC input, 80% load, 25°C 480VAC input, 80% load, 45°C -35 -40 10 Non-condensing (operating) Primary to Secondary Isolation test not to be carried out on power supply. Non - UL1310 Class 2 output in USA and Canada. UL1310 Class 2 output for in USA only. UL1310 Class 2 outputs for USA and Canada. Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND LXD75H Preliminary Datasheet 16 Mar 2012 380,000 140,000 1000 +70 +85 100 Hours Hours g °C °C %RH Specifications are subject to change without notice North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 75W EMC LED Power 75W Parameter Emissions Conducted Radiated Harmonic Distortion Flicker and Fluctuation Immunity ESD Radiated RFI Fast Transients - burst Surge Immunity Conducted RFI Power Freq Magnetic Field Voltage Dips Standard Level EN55015 EN55015 EN61000-3-2 EN61000-3-3 Compliant Compliant Class C Compliant EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Level 3 (A) Level 3 (A) Level 3 (A) Compliant Level 3 (A) Compliant Compliant Units Dimming Control Parameter 12V Output Voltage 12V Output Source Current Control Voltage (1-10V input Voltage applied on 1-10V input wire Source Current (1-10V input) Source current on 1-10V input wire Note Note Note Note Note Note Note A. B. C. D. E. F. G. Min 10.8 0 -2 0 Nom 12 Max 13.2 20 15 200 Units V mA V uA If dimming function is not used, 12V(Blk/Wht) and 1-10V(purple)wire must be connected together. Primary to Secondary Isolation test not to be carried on power supply. Load Voltage must be maintained above minimum voltage. See models for voltage range. Dimming range is 10%-100% Dimming Signal Voltage should be above 1V for linear dimming control. See Dimming Implementation diagrams for various dimming methods. Do not connect Dim - (Grey) cable to Output -V cable INPUT / OUTPUT WIRING INPUT CABLE SJTW 18AWG 3C Black (L), White(N), Green(E) 650±20mm OUTPUT CABLE SJTW 18AWG 2C Black (-V) and Red (+V) 220±20mm DIMMING CONTROL CABLE 22AWG 3C Blk/Wht (12V), Purple (1-10V), Grey (Dim - ) 270±20mm Dimming Implementation Diagrams (Blue) EXCELSYS LED DRIVER Blk/Wht Grey 2 Specifications are subject to change without notice LXD75H Preliminary Datasheet 16 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 75W LED Power 75W MECHANICAL SPECIFICATIONS Mechanical Outline DC OUTPUT (2*AWG #18) BLACK (ACL) WHITE (ACN) GREEN (GND) AC INPUT (3*AWG #18) RED (V+) BLUE (V-) DIMMING CONTROL (2*AWG #22) PURPLE (DIM+) GREY (DIM-) BLK/WHT (VC) 3 Specifications are subject to change without notice LXD75H Preliminary Datasheet 16 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com