JANTX2N3741

PNP Power Silicon Transistor 2N3740 & 2N3741 Features • Available in JAN, JANTX, JANTXV and JANS per MIL-PRF-19500/441 • TO-66 (TO-213AA) Package Maximum Ratings Symbol 2N3740 2N3741 Units Collector - Emitter Voltage Ratings VCEO 60 80 Vdc Collector - Base Voltage VCBO 60 80 Vdc Emitter - Base Voltage VEBO 7.0 Vdc Base Current IB 2.0 Adc Collector Current IC 4.0 Adc Total Power Dissipation @ TA = +25 °C @ TC = +100 °C PT 3 14 W W Operating & Storage Temperature Range Top, Tstg -65 to +200 °C RθJC 7.0 °C/W Thermal Resistance, Junction-to-Case Electrical Characteristics (TC = 25°C unless otherwise noted) OFF Characteristics Collector - Emitter Breakdown Voltage IC = 100 mAdc 2N3740 2N3741 Symbol Mimimum Maximum Units V(BR)CEO 60 80 --- Vdc Collector - Emitter Cutoff Current VCE = 40 Vdc VCE = 60 Vdc 2N3740 2N3741 ICEO --- 10 10 μAdc Collector - Emitter Cutoff Current VCE = 60 Vdc, VBE = 1.5 Vdc VCE = 80 Vdc, VBE = 1.5 Vdc 2N3740 2N3741 ICEX --- 300 300 nAdc Collector - Base Cutoff Current VCB = 60 Vdc VCB = 80 Vdc 2N3740 2N3741 ICBO --- 100 100 nAdc IEBO --- 100 nAdc Emitter - Base Cutoff Current VEB = 7.0 Vdc Revision Date: 12/14/2011 New Product 1 2N3740 & 2N3741 Electrical Characteristics -con’t ON Characteristics (1) Symbol Forward Current Transfer Ratio IC = 100 mAdc, VCE = 1.0 Vdc IC = 250 mAdc, VCE = 1.0 Vdc IC = 500 mAdc, VCE = 1.0 Vdc Minimum 30 120 20 10 IC = 4.0 Adc, VCE = 5.0 Vdc 3 Base - Emitter Voltage IC = 250 mAdc, VCE = 1 Vdc Unit 40 HFE IC = 1.0 Adc, VCE = 1.0 Vdc Collector - Emitter Saturation Voltage IC = 250 mAdc, IB = 25 mAdc IC = 1.0 Adc, IB = 1.25 mA Maximum VCE(sat) ----- 0.4 0.6 Vdc VBE(on) --- 1.0 Vdc | hfe | 1 12 hfe 25 250 Cobo --- 100 pF ton --- 400 μs toff --- 1.0 μs DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 100 mAdc, VCE = 10.0 Vdc, f = 5.0 MHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 50 mAdc, VCE = 10.0 Vdc, f = 1.0 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz SWITCHING Characteristics Tum-On Time VCC = 30 Vdc, Tum-off Time VCC = 30 Vdc, IC = 1.0 Adc, IB = 0.1Adc IC = 1.0 Adc, IB1 = -IB2 = 0.1Adc SAFE OPERATING AREA DC Tests: TC = +25 °C, 1 Cycle, t = 1.0 s Test 1: VCE = 6.25 Vdc, IC = 4.0 Adc VCE = 20 Vdc, IC = 1.25 Adc Test 2: Test 3: VCE = 50 Vdc, IC = 150 mAdc VCE = 65 Vdc, IC = 150 mAdc 2N3740 2N3741 (1) Pulse Test: Pulse Width = 300 μs, Duty Cycle ≤2.0%. 2 603-641-3800 • 888-641--SEMI (7364) • metelics-sales@aeroflex.com • www.aeroflex.com/metelics Revision Date: 12/14/2011 2N3740 & 2N3741 Outline Drawing NOTE: Dimensions in Inches [mm] Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Revision Date: 12/14/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.