JANTX2N6284

NPN Darlington Power Silicon Transistor 2N6283 & 2N6284 Features • Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/504 • TO-3 (TO-204AA) Package Maximum Ratings Symbol 2N6283 2N6284 Units Collector - Emitter Voltage Ratings VCEO 80 100 Vdc Collector - Base Voltage VCBO 80 100 Vdc Emitter - Base Voltage VEBO 7.0 Vdc Base Current IB 0.5 Adc Collector Current IC 20 Adc Total Power Dissipation @ TA = +25 °C (1) @ TA = +100 °C PT 175 87.5 W Operating & Storage Temperature Range Top, Tstg W -65 to +200°C Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Symbol Maximum Units RθJC 0.857 °C/W 1) Derate linearly @ 1.0 mW/°C for TA > +25°C Electrical Characteristics OFF Characteristics Collector - Emitter Breakdown Voltage IC = 100 mAdc 2N6283 2N6284 Symbol Mimimum Maximum Units V(BR)CEO 80 100 --- Vdc Collector - Emitter Cutoff Current VCE = 40 Vdc VCE = 50 Vdc 2N6283 2N6284 ICEO --- 1.0 1.0 mAdc Collector - Emitter Cutoff Current VCE = 80 Vdc, VBE = -1.5 Vdc VCE = 100 Vdc, VBE = -1.5 Vdc 2N6283 2N6284 ICEX --- 0.01 0.01 mAdc IEBO --- 2.5 mAdc Emitter - Base Cutoff Current VEB = 7.0 Vdc Revision Date: 11/6/2014 1 2N6283 & 2N6284 Electrical Characteristics -con’t ON Characteristics (2) Symbol Forward Current Transfer Ratio IC = 1.0 Adc, VCE = 3.0 Vdc IC = 10.0 Adc, VCE = 3.0 Vdc IC = 10.0 Adc, IB = 40 mAdc Base - Emitter Saturation Voltage IC = 20.0 Adc, IB = 200 mAdc Maximum Unit 1,500 HFE IC = 20.0 Adc, VCE = 3.0 Vdc Collector - Emitter Saturation Voltage IC = 20.0 Adc, IB = 200 mAdc Minimum 1,250 18,000 500 VCE(sat) --- 3.0 Vdc 2.0 VBE(sat) --- 4.0 Vdc VBE --- 2.8 Vdc | hfe | 8.0 80 hfe 700 --- Cobo --- 350 pF IC = 10.0 Adc; IB = 40 mAdc ton --- 2.0 μs IC = 10.0 Adc; IB1 = IB2 = 40 mAdc toff --- 10.0 μs Base - Emitter Voltage IC = 10.0 Adc, IB = 3.0 Vdc DYNAMIC Characteristic Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 10.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 10.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz Switching Characteristic Turn-On Time VCC = 30 Vdc; Turn-Off Time VCC = 30 Vdc; SAFE OPERATING AREA DC Tests: TC = +25 °C, 1 Cycle, t = 1.0 s Test 1: VCE = 8.75 Vdc, IC = 20 Adc VCE = 30 Vdc, IC = 5.8 Adc Test 2: Test 3: VCE = 80 Vdc, IC = 100 mAdc VCE = 100 Vdc, IC = 100 mAdc (2) Pulse Test: Pulse Width = 300 μs, Duty Cycle ≤2.0%. 2 603-641-3800 • 888-641--SEMI (7364) • metelics-sales@aeroflex.com • www.aeroflex.com/metelics Revision Date: 11/6/2014 2N6283 & 2N6284 Outline Drawing Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelicsHRC www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex / Metelics. All rights reserved. Revision Date: 11/6/2014 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.