MAAM-009116-TR3000

MAAM-009116 High Dynamic Range IF Amplifier 50 - 1000 MHz Functional Block Diagram Features         Rev. V2 Single +5 V Supply Voltage 18 dB Gain +22 dBm P1dB +40 dBm OIP3 2.4 dB Noise Figure Lead-Free SOT-89 Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Re-flow Compatible GND Description The MAAM-009116 is a high dynamic range amplifier in a lead-free SOT-89 surface mount plastic package. It can be operated from a single 5 volt supply. The MAAM-009116 offers a combination of low noise figure, high gain, and high output IP3 making this an ideal IF amplifier for receiver and transmitter applications. The MAAM-009116 is fabricated using M/A-COM Technology Solutions MESFET process to realize low noise and high dynamic range. The process features full passivation for performance and reliability. Ordering Information 1,2 Part Number Package MAAM-009116-000000 Bulk Packaging MAAM-009116-TR3000 3000 piece reel MAAM-009116-001SMB 500 MHz Configuration Pin 1 RFIN GND RFOUT Pin Configuration Pin No. Function Pin No. Function 1 RF Input 3 RF Output/Bias 2 Ground 4 Ground Maximum Operating Conditions3 Parameter Maximum Operating Conditions Junction Temperature 4 150°C RF Output Power 22 dBm Operating Temperature -40°C to +85°C 3. These operating conditions will ensure MTTF > 1 x 106 hours. 4. Junction Temperature (TJ) = TC + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 70° C/W. a) For TC = 25°C, TJ = 88 °C @ 5 V, 180 mA, POUT = 5 dBm, PIN = -13 dBm b) For TC = 85°C, TJ = 143 °C @ 5 V, 165 mA, POUT = 4.7 dBm, PIN = -13 dBm Absolute Maximum Ratings5,6 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Parameter Absolute Maximum RF Input Power 20 dBm Voltage 6 volts Storage Temperature -55°C to +150°C Junction Temperature 175°C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM Tech does not recommend sustained operation near these survivability limits. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009116 High Dynamic Range IF Amplifier 50 - 1000 MHz Rev. V2 Electrical Specifications for Single Ended Performance: Z0 = 50 Ω, TA = 25 °C, VDD = +5 V Parameter Test Conditions Units Min. Typ. Max. Gain 500 MHz dB 15 18 — Noise Figure 500 MHz dB — 2.4 — Input Return Loss 500 MHz dB — 13 — Output Return Loss 500 MHz dB — 12 — Output P1dB 500 MHz dBm — 22 — Output IP3 500 MHz dBm 37 40 — Current VDD = +5 V mA — 180 200 PCB Layout Parts List Part Value Case Style Manufacturer C1,C3 1000 pF 0402 Murata C2 0.018 µF 0805 Murata L1 22 nH 0402 Coilcraft L2 150 nH 0603 Coilcraft R1 8.2 Ω 0402 Panasonic Application Schematic VCC C2 C1 L1 ` L2 ` RFIN R1 C3 RFOUT 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009116 High Dynamic Range IF Amplifier 50 - 1000 MHz Rev. V2 Typical Performance Curves Input Return Loss Gain 0 25 -5 20 -10 15 -15 +25°C -40°C +85°C 10 5 0 200 400 600 +25°C -40°C +85°C -20 800 1000 -25 0 200 Frequency (MHz) 400 600 800 1000 Frequency (MHz) Output Return Loss Noise Figure 0 4 +25°C -40°C +85°C -5 3 -10 2 -15 -20 +25°C -40°C +85°C 1 -25 -30 0 200 400 600 800 0 400 1000 450 500 550 600 Frequency (MHz) Frequency (MHz) Gain IP3 50 30 40 25 30 20 +25°C -40°C +85°C 20 10 -5 0 5 15 10 P +25°C -40°C +85°C OUT (dBm) 15 20 25 10 -5 0 5 10 P OUT 15 20 25 (dBm) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009116 High Dynamic Range IF Amplifier 50 - 1000 MHz Rev. V2 Typical Performance Curves Current 300 250 Handling Procedures 200 Please observe the following precautions to avoid damage: 150 Static Sensitivity 100 +25°C -40°C +85°C 50 0 -5 0 5 10 P OUT 15 20 25 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. (dBm) Lead Free SOT-89 Plastic Package† NOTES 1. REFERENCE EIAJ SC-62 FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION. 2. REFERENCE M538 FOR PCB FOOTPRINT INFORMATION. 3. ALL DIMENTIONS SHOWN AS INCHS/MM. † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009116 High Dynamic Range IF Amplifier 50 - 1000 MHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support