MAAP-011022-TR0500

MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Features        Rev. V3 Functional Block Diagram 7 W Pulsed Output Power (Saturated) 23 dB Gain +10 V Bias Operation 50 Ω Impedance, Balanced Design Lead-Free 6 mm 28-lead PQFN Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible VGAx VDAx -5 V TSENSE RFIN RFOUT 90° 90° Description The MAAP-011022 is a 2.7 to 3.0 GHz high power balanced amplifier, which is designed for S-Band aviation and weather radar applications. This device puts out 7 W pulsed and is designed to operate at an 8% duty cycle. The MAAP-011022 is packaged in a lead-free 6 mm 28-lead plastic package for high volume manufacturing. This IC utilizes one of MACOM’s advanced 0.5 µm processes, which has been optimized so amplifiers, passives, and control components can be combined on a single IC. This MAAP-011022 is specifically targeted for avionics and weather radar. Ordering Information1,2 Part Number Package MAAP-011022-TR0500 500 piece reel MAAP-011022-001SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. Sample board includes 5 loose parts. *Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. DETOUT HPACNTRL VDBx VGBx Pin Configuration3,4,5,6 Pin No. Function Pin No. Function 1 VD2A 15 VCOUT 2 No Connection 16 VG1B 3 VD1A 17 VG2B 4 No Connection 18 No Connection 5 VG2A 19 VD1B 6 VG1A 20 No Connection 7 No Connection 21 VD2B 8 No Connection 22 No Connection 9 RFIN 23 RFOUT 10 No Connection 24 No Connection 11 No Connection 25 No Connection 12 No Connection 26 No Connection 13 HPACNTRL 27 DETOUT 14 -5 V 28 TSENSE 29 7 Ground Pad 3. See the evaluation board schematic for the recommended external components. 4. VDAx and VDBx are connected to the +10 V bias. 5. The gates are controlled internally from the bias circuit shown on the evaluation board schematic but need to be bypassed as shown. VGAx must be connected to VGBx. 6. HPACNTRL is tied to +5 V for drain switching. For gate switching the PA is turned off when HPACNTRL is at 0 V. 7. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Electrical Specifications: Freq. = 2.7 - 3.0 GHz, TA = 25°C, VDAx = VDBx = +10 V, IDQ = ~2.0 A, Z0 = 50 Ω, 80 µs Pulse, 8% Duty Cycle Parameter Units Min. Typ. Max. Small-Signal Gain dB 21.0 23.5 25 Input / Output Return Loss dB - 20 - P1dB dBm 37.5 - PSAT (PIN = +18 dBm) dBm 37.0 38.3 - PAE % - 28.0 - Power Detector Voltage @ P3dB mV - 2200 - Temperature Sensor Voltage9 @ 25°C V -3.50 -3.24 -3.00 -5 V Current mA - 9.0 20.0 Drain Current A - 2.5 3.4 8 8. Under RF drive. 9. Slope –1.69 mV/°C Absolute Maximum Ratings10,11,12,13 Parameter Absolute Maximum RF Input Power +25 dBm Drain Voltage 12 V Gate Voltage (VGAx, VGBx) -3 V to 0 V13 Negative Voltage -6 V ≤ -5 V Bias ≤ 0.5 V Duty Cycle 10 % Operating Temperature Junction Temperature 14 Storage Temperature -40°C to +85°C 160°C -65°C to +125°C Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide and Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 10. Exceeding any one or combination of these limits may cause permanent damage to this device. 11. MACOM does not recommend sustained operation near these survivability limits. 12. Operating at nominal conditions with TJ ≤ 160°C will ensure MTTF > 1 x 106 hours. 13. VGAx, VGBx can go to +0.3 V if no drain voltage is applied. 14. Junction Temperature (TJ) = TC + ӨJC * ((V * I) - (POUT - PIN)) Typical thermal resistance: 80 µs pulse, 8% duty cycle, ӨJC = 2.0°C/W a) For TC = +25°C, TJ = 62 °C @ 10 V, 2.5 A, POUT = 6.6 W, PIN = 0.07 W b) For TC = +85°C, TJ = 143 °C @ 10 V, 3.4 A, POUT = 5.0 W, PIN = 0.07 W 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Evaluation Board Schematic15,16 15. The standard build configuration is to omit resistors R15 & R16. This configuration activates the on-board +10 V pulser circuit. 16. In order to bypass on-board +10 V pulser circuit, remove R13, R14, R17 & R18, and add R15 & R16. Parts List 3 Part CR1 C2 C3, C18 C4, C5 C13 C14, C15 C22, C25 R1, R5 - R9 R2 - R4 R10, R11 R12 R13 - R18 Parts List Value 50 V Diode .01 µF 100 pF 150 µF 0.1 µf 560 pF 1000 pF 0Ω 1 kΩ 180 Ω 0.02 Ω 0Ω Case Style 0603 0603 0402 0402 0402 0402 1210 0402 4527 1206 Part J1 J7 - J10 Q1 U1 U2 Value 10 Row Connector IRF4905SPbF 8 W HPA TC4421ESM Case Style Header SMA T0-220AB 6mm PQFN-28LD 8-SOIC M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Typical Performance Curves: VDAx=VDBx=10 V, IDQ=2.0 A (80 µs Pulse, 8% Duty Cycle) Gain vs. Frequency Input Return Loss vs. Frequency 30 -10 25 -15 20 -20 +25°C -40°C +85°C 15 10 2.5 2.6 2.7 +25°C -40°C +85°C -25 2.8 2.9 3.0 3.1 3.2 -30 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.0 3.1 3.2 Frequency (GHz) Frequency (GHz) Reverse Isolation vs. Frequency Output Return Loss vs. Frequency -10 -10 +25°C -40°C +85°C -15 +25°C -40°C +85°C -20 -30 -20 -40 -50 -25 -60 -30 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 -70 2.5 2.6 2.7 Frequency (GHz) 30 0.4 25 0.3 20 0.2 10 +25°C -40°C +85°C 4 20 25 2.9 Drain Current vs. Output Power (80 µs Pulse, 8% Duty Cycle) Gain vs. Output Power 15 2.8 Frequency (GHz) +25°C -40°C +85°C 0.1 30 Output Power (dBm) 35 40 0.0 20 25 30 35 Output Power (dBm) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 40 MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Typical Performance Curves: VDAx=VDBx=10 V, IDQ=2.0 A (80 µs Pulse, 8% Duty Cycle) P3dB vs. Frequency P1dB vs. Frequency 41 41 +25°C -40°C +85°C 40 40 39 39 38 38 37 37 36 36 35 2.70 2.75 2.80 2.85 2.90 2.95 3.00 +25°C -40°C +85°C 35 2.70 2.75 2.80 35 2000 30 1600 25 1200 20 800 +25°C -40°C +85°C 15 2.95 2.80 2.85 2.90 2.95 3.00 20 25 30 35 Output Power (dBm) Frequency (GHz) Temperature Sensor Voltage vs. Temperature -3.0 -3.1 -3.2 -3.3 -3.4 -3.5 -50 5 -25 3.00 400 0 2.75 2.90 Power Detector Voltage vs. Output Power PAE vs. Frequency 10 2.70 2.85 Frequency (GHz) Frequency (GHz) 0 25 50 75 100 Temperature (°C) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 40 MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Typical Performance Curves: VDAx=VDBx=10 V, IDQ=2.0 A (80 µs Pulse, 8% Duty Cycle) Load Ruggedness 2:1 vs. Input Power Load Ruggedness 3:1 vs. Input Power 42 42 40 40 38 38 36 36 34 34 32 32 10 11 12 13 14 15 16 17 18 19 20 10 11 12 13 14 15 16 Input Power (dBm) Input Power (dBm) Load Ruggedness 6:1 vs. Input Power Load Ruggedness 9:1 vs. Input Power 42 42 40 40 38 38 36 36 34 34 32 10 11 12 13 14 15 16 17 18 19 32 20 10 11 12 13 14 15 16 17 18 19 20 17 18 19 20 Input Power (dBm) Input Power (dBm) 0 22.5 45 67.5 90 112.5 135 157.5 180 202.5 225 247.5 270 292.5 315 337.5 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 Typical Performance Curves: VDAx=VDBx=10 V, IDQ=2.0 A (80 µs Pulse, 8% Duty Cycle) 3rd Harmonic @ P1dB vs. Frequency 2nd Harmonic @ P1dB vs. Frequency -40 -30 -35 +25°C -40°C +85°C -42 +25°C -40°C +85°C -44 -46 -40 -48 -45 2.70 2.75 2.80 2.85 2.90 2.95 3.00 -50 2.70 2.75 2.80 2.85 2.90 2.95 3.00 2.95 3.00 Frequency (GHz) Frequency (GHz) 3rd Harmonic @ P3dB vs. Frequency 2nd Harmonic @ P3dB vs. Frequency -30 -40 -42 -35 -44 -46 +25°C -40°C +85°C +25°C -40°C +85°C -40 -48 -45 2.70 2.75 2.80 2.85 2.90 2.95 3.00 Frequency (GHz) -50 2.70 2.75 2.80 2.85 2.90 Frequency (GHz) 2nd Harmonic @ -10 dBm vs. Frequency -50 +25°C -40°C +85°C -52 -54 -56 -58 -60 2.70 7 2.75 2.80 2.85 2.90 2.95 3.00 Frequency (GHz) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Lead-Free 6 mm 28-Lead PQFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is NiPdAuAg. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Rev. V3 MAAP-011022 7 W Pulsed High Power Amplifier 2.7 - 3.0 GHz, 6 mm PQFN 28-LD Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 9 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support