MASW-009101-TR1000

MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Features        Rev. V3 Functional Schematic** 75 Ω Terminations RF1 / RF2 Positive Voltage Control High Isolation: 90 dB @ 216 MHz Low Insertion Loss: 1.4 dB @ 2200 MHz Lead-Free 3 mm 16-Lead PQFN Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible N/C RF1 GT1 N/C 16 N/C N/C 1 75 Ω N/C V1 V2 RFC 75 Ω Description N/C The MASW-009101 is a single pole double throw (SPDT) switch in a lead-free 3 mm 16-lead PQFN package. It meets FCC 15.115 specification of 80 dB isolation between RF1 and RF2 at 216 MHz during powered and un-powered states. The default on un-powered state provides a low insertion loss path from RFC to RF1 while maintaining high isolation between RF2 and RFC/RF1. N/C N/C N/C RF2 GT2 ** Default On path shown Pin Configuration 3 This device is ideally suited for applications where low control voltage, high isolation, small size and low cost are required. Pin No. Pin Name Description 1 N/C No Connection 2 N/C No Connection Typical applications are to replace mechanical relays in CATV and satellite systems. This part can be used in all 75 Ω systems operating up to 3 GHz. 3 RFC RF Common Port 4 N/C No Connection 5 N/C No Connection 6 N/C No Connection 7 RF2 RF Port 2 8 GT2 RF Termination 9 N/C No Connection 10 V2 Control Voltage 2 11 V1 Control Voltage 1 12 N/C No Connection 13 GT1 RF Termination 14 RF1 RF Port 1 15 N/C No Connection 16 N/C No Connection The MASW-009101 is fabricated using a GaAs pHEMT process. The process features full passivation for performance and reliability. Ordering Information 1,2 Part Number Package MASW-009101-TR3000 3000 piece reel MASW-009101-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 17 3 PAD RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 75 Ω4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RF1 to RFC 50 MHz 220 MHz 1000 MHz 2200 MHz dB — 0.5 0.6 0.8 1.0 1.4 0.8 0.9 1.2 1.4 1.9 Insertion Loss RF2 to RFC 50 MHz 220 MHz 1000 MHz 2200 MHz dB Isolation RFC-RF1/RF2 50 MHz 220 MHz 1000 MHz 2200 MHz Isolation RF1-RF2 50 MHz 220 MHz 1000 MHz 2200 MHz Return Loss 50 MHz 220 MHz 1000 MHz 2200 MHz dB Input P1dB (RF1/RF2) 1000 MHz IIP3 (RF1/RF2) — 52 47 80 70 55 50 — 80 60 47 95 95 70 50 — — 25 20 15 13 — dBm — 28/18 — 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm — 40/37 — IIP2 (RF1/RF2) 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm — 58/53 — CSO (RF1/RF2) 132 channels, 18 dBmV / channel in dBc — -80/-70 — CTB (RF1/RF2) 132 channels, 18 dBmV / channel in dBc — -85/-85 — Trise, Tfall 10% to 90% RF, 90% to 10% RF ns — 16 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 120 — Transients In Band mV — 80 — Control Current |VC| = 3.0 V µA — 500 600 dB dB Electrical Specifications: TA = 25°C, Z0 = 75 Ω4, Unpowered Operation Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RF1 to RFC 2200 MHz dB — — 1.4 Isolation RF1-RF2 50 MHz 220 MHz 1000 MHz 2200 MHz dB 60 47 90 90 70 50 — CSO / CTB 132 channels, 18 dBmV / channel in dBc — -80/-80 — 4. External 0.1 µF DC blocking capacitors are required on all RF In/Out and RF ground ports. See Application Schematic. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Truth Table 5 Rev. V3 Absolute Maximum Ratings 6,7 V1 V2 RFC - RF1 RFC - RF2 Parameter Absolute Maximum 0 0 On Off +29 dBm 1 0 On Off Input Power (5 - 3000 MHz, 3 V Control) 0 1 Off On Operating Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 5. Powered Operation: 1 = +3 to +5 V, 0 = 0 + 0.2 V. Unpowered Operation: V1 = V2 = 0 V, ΙV1-V2Ι ≤ 0.1 V. 6. Exceeding any one or combination of these limits may cause permanent damage. 7. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. Application Schematic RF1 C1-C5 = 0.1 µF C6-C7 = 1000 pF Off-Chip Component Values C2 C4 16 1 C6 75 Ω RFC V2 75 Ω C7 C5 RF2 Recommended PCB Value Package C1-C5 0.1 μF 0402 C6-C7 1000 pF 0402 V1 C1 C3 Component Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Powered State Insertion Loss, RFC to RF2 Insertion Loss, RFC to RF1 0.0 0.0 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 +25°C -40°C +85°C -2.0 +25°C -40°C +85°C -2.0 -2.5 -2.5 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Isolation, RFC to RF1 Isolation, RFC to RF2 0 0 +25°C -40°C +85°C -20 +25°C -40°C +85°C -20 -40 -40 -60 -60 -80 -80 -100 -100 0.0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Powered State Isolation, RF1 to RF2 (RFC to RF2 State) Isolation, RF1 to RF2 (RFC to RF1 State) 0 0 +25°C -40°C +85°C -20 -20 -40 -40 -60 -60 -80 -80 -100 +25°C -40°C +85°C -100 0.0 0.5 1.0 1.5 2.0 2.5 0.0 0.5 Frequency (GHz) Input Return Loss, RFC 0 -10 -10 -20 -20 -30 -30 +25°C -40°C +85°C -40 0.5 1.5 2.0 2.5 Output Return Loss, RF1/RF2 0 0.0 1.0 Frequency (GHz) 1.0 1.5 Frequency (GHz) 2.0 2.5 +25°C -40°C +85°C -40 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Unpowered State Insertion Loss, RFC to RF1 (unpowered state) 0.0 -0.5 -1.0 -1.5 +25°C -40°C +85°C -2.0 -2.5 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Isolation, RF1 to RF2 (RFC to RF1 unpowered state) Isolation, RFC to RF2 (unpowered state) 0 0 -20 +25°C -40°C +85°C -20 +25°C -40°C +85°C -40 -40 -60 -60 -80 -80 -100 -100 0.0 0.5 1.0 1.5 2.0 2.5 0.0 0.5 Output Return Loss, RF1/RF2 (unpowered state) 1.5 2.0 2.5 Input Return Loss, RFC (unpowered state) 0 0 -10 -10 -20 -20 -30 1.0 Frequency (GHz) Frequency (GHz) -30 +25°C -40°C +85°C +25°C -40°C +85°C -40 -40 0.0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Lead-Free 3 mm 16-Lead PQFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% tin over copper. 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support