AM1D-0505S-NZ

Click on Series name for product info on aimtec.com Series AM1D-NZ No Recommended of New Design 1 Watt | DC-DC Converter FEATURES: • • • • • Operating temperature -40°C to + 85°C or -40°C to + 105°C on 6000V models • 1 sec short circuit protection or continuous on 6000V models • Pin compatible with multiple manufacturers RoHS compliant 7 pin SIP package High efficiency up to 81% Low profile plastic package Models Single output Input Voltage (V) Output Voltage (V) Output Current max (Ma) Input Current Max | No Load (mA) Isolation (VDC) Efficiency (%) AM1D-0505S-NZ AM1D-0512S-NZ ※ 4.5-5.5 4.5-5.5 5 12 200 83 250 | 20 250 | 20 1000 1000 72 77 AM1D-0505SH30-NZ 4.5-5.5 5 200 250 | 20 3000 70 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 5 9 12 5 9 12 15 5 200 110 83 200 110 83 70 200 256 | 30 253 | 30 253 | 30 104 | 20 104 | 20 104 | 20 104 | 20 83 | 16 6000 6000 6000 6000 6000 6000 6000 6000 75 75 77 78 76 79 81 77 Output Current (mA) Input Current Max | No Load (mA) Model AM1D-0505SH60-NZ ※ AM1D-0509SH60-NZ ※ AM1D-0512SH60-NZ ※ AM1D-1205SH60-NZ ※ AM1D-1209SH60-NZ ※ AM1D-1212SH60-NZ ※ AM1D-1215SH60-NZ ※ AM1D-1505SH60-NZ ※ Models Dual output Input Voltage (V) Model Output Voltage (V) Isolation (VDC) Efficiency (%) AM1D-0505D-NZ AM1D-0512D-NZ AM1D-0515D-NZ AM1D-1212D-NZ AM1D-2412D-NZ 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 21.6-26.4 ±5 ±12 ±15 ±12 ±12 ±100 ±42 ±35 ±42 ±42 250 | 20 248 | 20 248 | 20 92 | 15 51 | 7 1500 1500 1500 1500 1500 80 80 80 79 80 AM1D-0505DH60-NZ ※ AM1D-0509DH60-NZ AM1D-0512DH60-NZ ※ AM1D-1215DH60-NZ ※ 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 ±5 ±9 ±12 ±15 ±100 ±55 ±42 ±35 256 | 30 253 | 30 253 | 30 102 | 20 6000 6000 6000 6000 75 75 78 81 Note: For models marked with ※ will be discontinued (EOL) by December 30, 2020; for new designs, please refer to AM1DM-NZ or AM1DS-JZ or AM1D-Z series. Input Specifications Parameters Nominal 5 12 15 24 Typical Filter www.aimtec.com F 051e R6.W REV: 03/20/A Maximum 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Units VDC Capacitor Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (926 6832) North America only No Recommended of New Design Series AM1D-NZ 1 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1000, 3000 & 6000 VDC MOhm pF Maximum Units > 1000 60 Output Specifications Parameters Voltage accuracy Voltage balance Conditions Typical ±5 ±1 Momentary (1 sec.) Continuous on 6000V models ±1.2 10 ±0.03 75 Dual Output Short Circuit protection Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise For 1.0% of Vin load 10~100% At 20MHz Bandwidth % % % % %/oC mV p-p General Specifications Parameters Switching frequency Conditions Typical 100% load (6000V models only) 150 40 Maximum Units KHz oC +125 -40 to +85 oC Operating temperature Up to +105 on 6000V models only, see derating table oC Storage temperature -55 to +125 Derating Not-Required Cooling Free air convection Humidity 90 % Case material Non-conductive black plasticUL94V-0 Weight 2 g 1000 & 3000VDC 0.76 x 0.24 x 0.37 inch 19.5 x 6.00 x 9.35 mm Dimensions (L x W x H) 6000VDC 0.76 x 0.39 x 0.49 inch 19.50 x 9.80 x 12.5 mm MTBF >1 100 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity