AM30CW-4805SNZ

AM30CW-NZ DC-DC Converter Click to ORDER AM30CW-NZ samples The AM30CW-NZ is a 30W DC/DC converter that offers a regulated output which contributes to a more stable and reliable output performance. It features a wide 4:1 input voltage range of 18-75VDC, which will benefit your new system design. This series offers great operating temperatures, from -40°C to 85°C. Furthermore, an isolation of 1500VDC, a high MTBF of 1,000,000h, continuous output short circuit protection (OSCP), over-current protection (OCP), over-voltage protection (OVP), and under voltage lock-out (UVLO) come standard with the series. 1x1 The AM30CW-NZ is suitable for grid power, instrumentation, industrial controls, communication, and civil applications. Features • • • • • • • Summary Operating Temp: -40 °C to +85 °C Isolation voltage: 1500VDC High efficiency: Up to 88% typ. Regulated single output Output short circuit, over-current, over-voltage, input under voltage protection Standard 1 x1 package Design to meet EN62368 AM30CW-NZ 1500 6000 48 200 125 85 24 75 18 125 1500 5 3.3 1000 40 30 3 3 Input voltage Output voltage (VDC) (V) Isolation (VAC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM30CW-NZ DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) AM30CW-4805SNZ AM30CW-4812SNZ AM30CW-4815SNZ AM30CW-4824SNZ 48 (18-75) 48 (18-75) 48 (18-75) 48 (18-75) 5 12 15 24 Nominal Vin Input Current Max (mA) No Load Full Load 15 15 15 15 735 735 735 735 Output Current Max (A) Maximum Capacitive Load (µF) Efficiency Full Load Typ (%) 6 2.5 2 1.25 7200 2000 1500 470 88 88 88 88 Input Specification Parameters Input voltage Absolute maximum rating Start-up voltage Start-up time Input reflected current Input under-voltage protection On/Off control Conditions Typical Maximum Units Nominal input Nominal input, 1s max. 18-75 ≥-0.7 80 100 18 Nominal input Nominal input 10 40 15.5 VDC VDC VDC ms mA VDC On Off Idle current Input filter Control pin open or 3.5-12VDC Control pin short to –Vin or 0-1.2VDC 2 7 mA Capacitor filter Isolation Specification Parameters Tested isolation voltage Resistance Capacitance Conditions Typical Maximum Units Input / output, 60 sec, ≤ 1mA Input / output, 500VDC Input / output, 100KHz / 0.1V ≥1500 ≥1000 2000 Conditions Typical Maximum Units 5% -100% load LL – HL 100% load 5% -100% load 25% load step change 25% load step change, 5V output 25% load step change, others 5% -100% load, 24V output 5% -100% load, others ±1 ±0.2 ±0.5 250 ±3 ±3 60 60 ±3 ±0.5 ±1 500 ±8 ±5 150 120 ±10 % % % μs % % mV pk-pk mV pk-pk % VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Transient Recovery Time Transient Response Deviation Ripple & Noise Voltage adjustment * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. F 052e R4 www.Aimtec.com 2 AM30CW-NZ DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency* 100% load 270 KHz Short circuit protection Continues, Auto recovery Over Current protection 170 260 % of Iout Over voltage protection ≥110 160 % of Vout Operating temperature With derating -40 to +85 °C Storage temperature -55 to +125 °C Soldering temperature 1.5mm distance, ≤ 10s 300 °C Temperature coefficient 100% Load ± 0.03 %/ °C Cooling Free air convection Humidity Non-condensing ≥5 95 % RH Weight 18.4 g Vibration test 10-150Hz, 5G, 0.75mm, 90min along all axis Dimensions (L x W x H) 1.00x 1.00 x 0.46 inches (25.40 x 25.40 x 11.70 mm) Case material Aluminum MTBF ≥ 1 000 000 hrs (MIL-HDBK -217F, t=+25°C) *Switching frequency reduced when load < 50%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity