AM3GH-4815DZ

Click on Series name for product info on aimtec.com Series AM3GH-Z 3 Watt | DC-DC Converter FEATURES: • • • • • • • • SIP 8 Package Low Ripple and Noise Continuous Short Circuit Protection -40ºC to +85ºC Operating Temperature Range Ultra-Wide Input Range 4:1 1600VDC I/O Isolation Efficiency up to 82% Remote ON/OFF Control Models Single output Model AM3GH-1203SZ AM3GH-1205SZ AM3GH-1212SZ AM3GH-1215SZ AM3GH-2403SZ AM3GH-2405SZ AM3GH-2412SZ AM3GH-2415SZ AM3GH-4803SZ AM3GH-4805SZ AM3GH-4812SZ AM3GH-4815SZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Maximum capacitive load (µF) Efficiency (%) 4.5-18 4.5-18 4.5-18 4.5-18 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 700 600 250 200 700 600 250 200 700 600 250 200 1760 1000 170 110 1760 1000 170 110 1760 1000 170 110 72 77 81 81 75 79 82 82 74 78 80 81 Input Voltage (V) Output Voltage (V) Output Current max (mA) Maximum capacitive load (µF) Efficiency (%) Models Dual output Model AM3GH-1205DZ 4.5-18 ±5 ±300 ±470 77 AM3GH-1212DZ 4.5-18 ±12 ±125 ±100 80 AM3GH-1215DZ 4.5-18 ±15 ±100 ±47 80 AM3GH-2405DZ 9-36 ±5 ±300 ±470 79 AM3GH-2412DZ 9-36 ±12 ±125 ±100 79 AM3GH-2415DZ 9-36 ±15 ±100 ±47 80 AM3GH-4805DZ 18-75 ±5 ±300 ±470 79 AM3GH-4812DZ 18-75 ±12 ±125 ±100 79 AM3GH-4815DZ 18-75 ±15 ±100 ±47 79 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 200 Output Specifications Parameters Voltage accuracy Cross Regulation (Dual Output) Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise* Conditions Typical 25% load on 1st output - 100% load on 2nd load Continuous Auto-Recovery ±5 0% to 100% load for single output models 10% to 100% load for dual output models ±1 ±0.02 20MHz Bandwidth 30 %/°C mV p-p Maximum Units * Measured with a 1µF CC General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Potting Material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation 100% load 100 -40 to 85 -40 to +125 Above 71°C 5 100 KHz °C °C °C %/ °C Free Air Convection 95 Non conductive black plastic Silicon (UL94V-0 rated) 4.5 0.86 x 0.36 x 0.44 inches 21.85 x 9.20 x 11.10 mm >1,700,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) 1.5mm from case for 10 second 260 25% load step change, 25% to 100% 250 25% load step change, 25% to 100% ±3 % RH g °C uS % Safety Specifications Parameters Agency Approval Standards www.aimtec.com F 051e R12.C Rev: 09/21/A CE Designed to meet IEC60950-1, 62368-1 EN55032, Class A with the recommended circuit IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC North America only (924 6832) Series AM3GH-Z 3 Watt | DC-DC Converter Dimensions Pin Printed face 10.60 (0.42) 1 2 3 6 7 8 Dual - V Input + V Input On/Off Control N.C. + V Output Common - V Output 3.00 (0.12) 0.50 (0.02) 5 Single 1 - V Input 2 + V Input 3 On/Off Control 5 N.C. 6 + V Output 7 - V Output 8 N.C. NC: Not Connected 0.50 (0.02) 3.20 (0.13) 21.85 (0.86) 2 3 6 7 8 0.25 (0.01) 5 9.20 (0.36) Bottom View 1 2.54 (0.1) Note: Unit: mm(inch) Pin pitch and length tolerance: ±0.35mm (±0.014) Case tolerance: ±0.50mm (±0.02) 0.50 (0.02) 17.78 (0.7) Derating Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 40 30 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R12.C Rev: 09/21/A Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC North America only (924 6832) Series AM3GH-Z 3 Watt | DC-DC Converter Control ON/OFF pin connection example VCC VCC (VDC) R1 (KΩ) R2(KΩ) ZD1(V , mA) 4.5 -18 9 - 36 18 - 75 7.5 18 33 0 2.2 6.8 10, 5 18, 5 36, 5 R1 TTL Signal 5.1K DC/DC Converter ZD1 R2 On / Off Control Recommended Circuits Conducted and Radiated Emissions L +V output +V input DC/DC Converter C1 -V input Load Input Voltage (V) 12 24 48 C1 (uF/V) 10/35 2.2/100 2.2/100 L(uH) 2.5 10 18 -V output EFT/ Surge +V output +V input DC/DC Converter C2 Load 220uF /100V -V input -V output NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity