AT5660H

AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Features ˙2 channels of DC motor BTL driver ˙2 channels of BTL driver for coils with current feedback ˙1 channels forward/reverse control DC motor driver ˙Built-in suspension function. ˙Built-in thermal shutdown circuit. ˙Operating voltage: 4.5V~13.2V Description The AT5660 is a 5-channel BTL driver IC. Two of them can drive DC motors and two can drive coils, such as the focus and tracking actuators of a CD-ROM/DVD-ROM/DVD-Player system, with current feedback. It also built-in one channel bi-direction DC motor driver for Tray. Applications CD-ROM/DVD-ROM/CD-RW drives DVD player. Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 1 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin name IN1 CAP1_1 CAP1_2 IN2 FB1 FWD REV VCC1 OUT5OUT5+ OUT2OUT2+ OUT1OUT1+ OUT4+ OUT4OUT3+ OUT3VCC2 FB4 VCTL GND IN3 CAP4_2 CAP4_1 IN4VBIAS MUTE_1_2_3_4 Function CH1(Focus coil) input CH1 error amplifier filter capacitor connection 1 CH1 error amplifier filter capacitor connection 2 CH2(Sled driver) input CH1(Focus coil) feedback pin CH5 forward input CH5 reverse input Power Supply 1 CH5(Tray driver) output(-) CH5(Tray driver) output(+) CH2(Sled driver) output (-) CH2(Sled driver) output (+) CH1(Focus coil) output (-) CH1(Focus coil) output (+) CH4(Tracking coil) output (+) CH4(Tracking coil) output (-) CH3(Loader) output (+) CH3(Loader) output (-) Power Supply 2 CH4(Tracking coil) feedback pin CH5 Speed control input Ground CH3(Loader) input CH4 error amplifier filter capacitor connection 2 CH4 error amplifier filter capacitor connection 1 CH4 (Tracking driver) input VREF input pin Mute control for CH1,Ch2,CH3,CH4 Notes: The indicated polarities for the output pins are under the condition that all inputs are (+). The power supplies for the driver output are PVcc1 for the loader, PVcc2 for focus and tracking drivers, and Vcc for pre-block and sled driver. Therefore, make sure Vcc≧PVcc1,2. Pin Out 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 2 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Ordering Information Part number AT5660H Package 28-pin HSOP Marking AT5660H Power Dissipation (Ta = 25oC) Condition: mount on 50x50 mm2 t=1.0mm paper phenol PCB Absolute maximum ratings (Ta = 25oC) Parameter Power supply voltage Power dissipation Operating temperature Storage temperature NOTE:* 1. Power dissipation reduces 13.6mW / °C for using above Ta=25°C 2. Do not exceed Pd and SOA. Symbol VCC1,2 Pd Topr Tstg Limits 13.5 1.7 -30~+80 -55~+150 unit V W o C o C Recommended operating conditions (Ta = 25oC) Parameter Power supply voltage Symbol VCC1 VCC2 Limits 4.0~13.2 4.0~Vcc1 unit V V 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 3 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Electrical characteristics (unless otherwise noted, Ta = 25oC,VCC1 =12V, VCC2 =5V, VBIAS=2.5V, RL1= RL2=8Ω, RL3= RL4=12Ω) Parameter Quiescent current Mute quiescent current Mute ON voltage Mute OFF voltage Output current offset Maximum output voltage Gain Output voltage offset Maximum output voltage Closed loop gain Output voltage offset Maximum output voltage Maximum output voltage Closed loop gain Gain error Maximum output voltage Symbol Min. IQC IQSB VSBON 0 VSBOFF 2.0 IO1,2 VO1,2 Gm VOFFSL VO3MAX GVSL VOFFLD VO4max1 VO4max2 GVLD ΔGVLD VO5max1 -6 3.6 1.3 -100 7.5 18.0 -50 7.5 3.6 13.5 0 3.8 -50 2.0 Typ. 18 4.0 1.5 0 9.0 20.0 0 9.0 4.0 15.5 1 6.0 0 Max. 27 5 0.5 6 1.7 100 22.0 50 17.5 2 4.2 50 0.8 Unit Conditions mA No Load mA CH5 active V V mA V VIN = VBIAS ±1.5V A/V VIN = VBIAS ±0.2V mV V dB mV V V dB dB V V mV V V VIN = VBIAS ±1.5V VIN = VBIAS ±0.2V VIN = VBIAS±2.0V VIN = VBIAS ±1.5V VCC1=5V VIN = VBIAS ±0.2V VIN = VBIAS±0.2V RL5=45Ω, RVCTL=400Ω, RL5=45Ω, RVCTL=0Ω, VCC1=VCC2=5V Output voltage offset Input high level voltage Input low level voltage VOFFTR VIH VIL 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 4 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Tray Motor Driver Fig1. Input FWD High High Low Low REV High Low High Low OUT5+ Low High Low Open Ouput OUT5Low Low High Open Status Break Forward Reverse Standby Tray Motor Speed Control The amplitude of the output voltage is controlled by VCTL(pin21). If you want to control differential output voltage of the tray, insert external resistor RVCTL as shown in figure 1. 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 5 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Test Circuit 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 6 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Typical Curve 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 7 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 8 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 9 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Application circuit 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 10 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 11 AT5660 Preliminary Product Information 5-Channel Motor Driver for DVD/VCD Package Outlines (units:mm): HSOP-28 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 12