PCS124-3R3M-RC

RoHS Power Chip Shielded Inductors Dimensions: Inches (mm) PCS124 Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 1V DCR Max. (Ω ) IDC (A) Features • • • • • Magnetically Shielded Low DCR Resistance High Energy Storage Low Energy Loss Suitable for pick and place PCS124-3R3M-RC PCS124-3R9M-RC PCS124-4R7M-RC PCS124-6R8M-RC PCS124-100M-RC PCS124-120M-RC PCS124-150M-RC PCS124-180M-RC PCS124-220M-RC PCS124-270M-RC PCS124-330M-RC PCS124-390M-RC PCS124-470M-RC PCS124-560M-RC PCS124-680M-RC PCS124-820M-RC PCS124-101M-RC PCS124-121M-RC PCS124-151M-RC PCS124-181M-RC PCS124-221M-RC PCS124-271M-RC PCS124-331M-RC 3.3 3.9 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 0.015 0.015 0.018 0.023 0.028 0.038 0.050 0.057 0.066 0.080 0.097 0.132 0.150 0.190 0.220 0.260 0.308 0.380 0.530 0.650 0.700 0.876 0.990 6.5 6.5 5.7 4.9 4.5 4.0 3.2 3.1 2.9 Electrical Inductance Range: 3.3µh to 330µh Tolerance: 20% Across entire range Test Frequency: 100Khz, 1V Operating Temp: -40ºC ~ 85ºC Rated Current: Inductance drop 35% Typical Resistance to Soldering Heat 2.8 2.7 2.1 1.9 1.8 1.5 1.3 1.2 1.1 .95 .85 .80 .60 .50 Pre-Heat 150ºC, 1 min. Solder Temp: 260ºC ± 5ºC Solder Composition: Sn/Ag3.0/Cu0.5 Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (IDA): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A Physical Packaging: 500 pieces per 13 inch reel Marking: EIA Inductance Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 4/02/08 15 www.alliedcomponents.com