TC100-5R6M-RC

RoHS Toroidal Chokes W TC100 O.D. I.D. H Lead Length Vertical Mount Horizontal Mount Allied Part Number Inductance (µh) Tolerance (%) DCR Max (Ω ) ID OD I (Nom) (Nom) MAX (Amps) W/H (Nom) Lead Length (Nom) Features • Pre-tinned Copper Leads • Vertical and Horizontal Mounting • Low Cost Construction • Varnished Windings Typical Applications Include: • Switching Power Supplies • Hash Choke Applications • EMI/RFI FilteringAnalyzer HP-4291A. Electrical Inductance: Measured at 1KHz, 0.01V. Rated current may decrease inductance by no more than 10%. Tolerance: Inductance Tolerance is 20% over the entire range of inductance values. Tighter tolerances available. Current Rating: Continuous operation at room temperature will not decrease inductance by more than 10%. 90% terminal coverage. Solder: H63A. Solder Available Options Include: • Tighter Tolerances • Custom Inductance Values • Custom Current Ratings • Custom P.C. Mounts, Including Surface MountsAnalyzer HP-4291A. ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( )TC100-1R0M-RC )TC100-1R2M-RC )TC100-1R5M-RC )TC100-1R8M-RC )TC100-2R2M-RC )TC100-2R7M-RC )TC100-3R3M-RC )TC100-3R9M-RC )TC100-4R7M-RC )TC100-5R6M-RC )TC100-6R8M-RC )TC100-8R2M-RC )TC100-100M-RC )TC100-120M-RC )TC100-150M-RC )TC100-180M-RC )TC100-220M-RC )TC100-270M-RC )TC100-330M-RC )TC100-390M-RC )TC100-470M-RC )TC100-560M-RC )TC100-680M-RC )TC100-820M-RC )TC100-101M-RC )TC100-121M-RC )TC100-151M-RC )TC100-181M-RC )TC100-221M-RC )TC100-271M-RC )TC100-331M-RC )TC100-391M-RC )TC100-471M-RC )TC100-561M-RC )TC100-681M-RC )TC100-821M-RC )TC100-102M-RC 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 .004 .004 .005 .005 .007 .007 .008 .009 .01 .011 .012 .013 .014 .018 .02 .025 .029 .035 .04 .06 .095 .120 .125 .200 .250 .31 .42 .49 .59 .64 .66 .74 .88 .99 1.1 1.3 1.6 5 5 5 5 5 5 5 5 5 4.5 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.0 1.7 1.7 1.5 1.5 1.5 1.0 1.0 .7 .7 .7 .7 .5 .5 .5 .58 .58 .58 .58 .58 .58 .58 .58 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .25 .25 .25 .25 .25 .25 .25 .25 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .262 .262 .262 .262 .262 .262 .262 .262 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 Please specify Vertical or Horizontal Mount by placing a V or H at the beginning of the part number, i.e. VTC100-1R0M (Vertical Mount). All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/20/09 www.alliedcomponents.com